期刊投稿: Note to Practitioners

Note to Practitioners 从业人员须知

In view that T-ASE addresses a research community willing to integrate knowledge across disciplines and industries, each paper will include a 100-300 word Note to Practitioners (NtP). Within the NtP, authors will step back and describe without jargon how their results might be applied to practical problems. Writing a good NtP is a challenge. Since the NtP will appear just below the Abstract, it is important not to repeat information that is contained in the Abstract. It should be aimed at colleagues from industry who want to understand how the ideas can be put into practice, avoiding jargon and mathematical notation. Begin by specifying the practical problem(s) that motivated the paper and possible application areas. Clearly describe the potential and limitations of the work, and how it might be extended to be more practical.
鉴于 T-ASE 面向愿意整合跨学科和行业知识的研究社区,每篇论文都将包括一份 100-300 字的从业者笔记 (NtP)。在 NtP 中,作者将退后一步,不用行话描述他们的结果如何应用于实际问题。写一个好的 NtP 是一个挑战。由于 NtP 将出现在摘要的正下方,因此不要重复摘要中包含的信息非常重要。它应该针对那些希望了解如何将想法付诸实践的行业同事,避免使用行话和数学符号。首先具体说明激发论文的实际问题和可能的应用领域。清楚地描述工作的潜力和局限性,以及如何将其扩展以使其更实用。
在这里插入图片描述
在这里插入图片描述

Step 2: File Upload 第 2 步:文件上传

ATTENTION: 注意力:
Your submission will NOT be considered for peer review unless it meets the following criteria:
除非您提交的内容符合以下标准,否则不会被考虑进行同行评审:

The required Note to Practitioners (N.T.P.) MUST appear in the PDF itself below the Abstract. For more information please click here
从业者须知 (N.T.P.)必须出现在摘要下方的 PDF 中。欲了解更多信息,请点击这里
Your manuscript must follow an approved, double column template: Please prepare your manuscript using one of the following T-ASE Manuscript Templates: LaTeX Template; MS Word Template
您的稿件必须遵循经批准的双栏模板:请使用以下 T-ASE 稿件模板之一准备您的稿件:LaTeX 模板;MS Word模板
Once formatted, you must convert your manuscript to PDF before uploading.
格式化后,您必须在上传之前将手稿转换为 PDF。
All author names MUST be listed on your manuscript and entered into Step 3: Authors & Institutions
所有作者姓名必须列在您的稿件上,并输入第 3 步:作者和机构
Author biographies and photos must be embedded in your manuscript without exceeding page limitations.
作者传记和照片必须嵌入到您的稿件中,不得超过页数限制。
Your manuscript cannot include colored or highlighted text. Annotated revisions can be included as a summary of changes.
您的稿件不能包含彩色或突出显示的文本。带注释的修订可以作为更改摘要包含在内。
If your paper is an extended work of a paper you or your co-authors previously published, please include the original work and a summary of differences.
如果您的论文是您或您的合著者之前发表的论文的扩展作品,请包括原始作品和差异摘要。
Page limits in double column format are as follows:
双栏格式的页数限制如下:
Regular: 8-12 普通:8-12
Communication Item: 18 通讯项目:18
Topic-Based & Conference-Based Special Issues: 8-12
基于主题和基于会议的特刊:8-12
Submissions that exceed the above page limits are subject to a $175 per page mandatory overlength page charge. Manuscripts that exceed these limits must be approved by the EiC.
超过上述页面限制的提交将收取每页 175 美元的强制性超长页面费用。超过这些限制的稿件必须得到EiC的批准。

### IEEE 期刊 LaTeX 模板使用教程及下载 #### 下载步骤 为了获取 IEEE 期刊的 LaTeX 模板,可以按照以下流程操作。通过搜索引擎(如 Google 或百度),输入关键词“IEEE Latex template”,或者直接访问 IEEE 官方网站——IEEE Xplore 进行查询[^3]。 1. **进入目标期刊主页** 前往 IEEE Transactions 的具体期刊页面,例如 TASE (Transactions on Automation Science and Engineering),找到该期刊的相关信息并点击 Submission Guidelines 链接。 2. **定位模板入口** 在 Submission Guidelines 页面中,利用页面内的搜索功能输入关键字 `templates`,随后选择 “IEEE Article Templates” 选项。 3. **选择合适的模板类别** 跳转至 IEEE Template Selector 工具界面,在此可以选择适合的目标文档类型。对于大多数学术投稿而言,建议选取 “Transactions, Journals and Letters” 类型。 4. **指定期刊名称** 输入所要投稿的具体期刊全名,比如上述提到的 TASE,并确认无误后继续下一步骤。 5. **确定文章性质** 对于常规研究论文,通常会选择 Original Research 和 Briefs 默认项。 6. **选用推荐格式** 控制科学领域或其他工程学科倾向于采用 LaTex 排版方式来提交稿件。 7. **完成最终下载动作** 执行 Download Template 动作即成功获得所需文件包,解压之后便可查看详细的说明文档以及样例源码。 #### 使用方法概述 一旦获得了官方发布的 IEEE Journal LaTeX 模板压缩包,接下来便是熟悉其内部结构与配置要点的过程: - **阅读 README 文件** 开始之前务必仔细通读随附的指导手册或帮助文档,其中包含了编译环境搭建指南、宏包依赖列表以及其他注意事项等内容[^1]。 - **加载必要宏包** 如果计划嵌入算法伪代码,则需额外引入支持此类布局设计的功能库 `\usepackage{algorithm}` 和 `\usepackage{algpseudocode}` 等[^2]。另外值得注意的是,默认情况下某些字体样式可能不符合预期效果,此时可通过加入如下命令解决潜在问题:`\usepackage[T1]{fontenc}` 来激活英文字符加粗显示特性[^4]。 - **调整页面参数设置** 根据实际需求修改页边距大小、标题级别定义等方面的规定值,确保整体外观风格严格遵循杂志社的要求标准。 - **编写主体内容部分** 利用现成框架填充个人研究成果描述材料的同时也要注意保持良好的层次分明逻辑关系,合理运用章节划分机制提升可读性和条理性。 - **执行构建过程验证成果质量** 将编辑完毕后的 tex 主文件导入到兼容性强的 Tex 编辑器里运行测试程序,观察是否存在错误提示信息直至顺利生成 PDF 输出版本为止。 ```python # 示例 Python 代码片段展示如何调用外部模块 import os def compile_latex(file_name): command = f'pdflatex {file_name}.tex' os.system(command) if __name__ == "__main__": file_to_compile = 'your_paper_title_here' compile_latex(file_to_compile) ```
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

资源存储库

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值