【期刊】【IEEE自动控制汇刊】【IEEE TRANSACTIONS ON AUTOMATIC CONTROL】

https://ieeexplore.ieee.org/xpl/RecentIssue.jsp?punumber=8856 

Aims & Scope 目标和范围

The IEEE Transactions on Automation Science and Engineering (T-ASE) publishes fundamental papers on Automation, emphasizing scientific results that advance efficiency, quality, productivity, and reliability. T-ASE encourages interdisciplinary approaches from computer science, control systems, electrical engineering, mathematics, mechanical engineering, operations research, and other fields. T-ASE welcomes results relevant to industries such as agriculture, biotechnology, healthcare, home automation, maintenance, manufacturing, pharmaceuticals, retail, security, service, supply chains, and transportation. T-ASE addresses a research community willing to integrate knowledge across disciplines and industries. For this purpose, each paper includes a Note to Practitioners that summarizes how its results can be applied or how they might be extended to apply in practice.
IEEE Transactions on Automation Science and Engineering (T-ASE) 发表有关自动化的基础论文,强调提高效率、质量、生产力和可靠性的科学成果。T-ASE 鼓励计算机科学、控制系统、电气工程、数学、机械工程、运筹学和其他领域的跨学科方法。T-ASE 欢迎与农业、生物技术、医疗保健、家庭自动化、维护、制造、制药、零售、安全、服务、供应链和运输等行业相关的成果。T-ASE面向愿意整合跨学科和行业知识的研究社区。为此,每篇论文都包括一份给从业者的说明,总结了如何应用其结果或如何将其扩展到实践中应用。

Additional Information 其他信息

The articles in this journal are peer reviewed in accordance with the requirements set forth in the IEEE PSPB Operations Manual (sections 8.2.1.C & 8.2.2.A). Each published article was reviewed by a minimum of two independent reviewers using a single-anonymous peer review process, where the identities of the reviewers are not known to the authors, but the reviewers know the identities of the authors. Articles will be screened for plagiarism before acceptance.
本期刊上的文章根据IEEE PSPB操作手册(第8.2.1.C节和8.2.2.A节)中规定的要求进行同行评审。每篇发表的文章都由至少两名独立审稿人使用单匿名同行评审程序进行审稿,其中作者不知道审稿人的身份,但审稿人知道作者的身份。文章在接受前将被筛选为抄袭。

Corresponding authors from low-income countries are eligible for waived or reduced open access APCs.
来自低收入国家的通讯作者有资格获得豁免或减少的开放获取APC。

 

Publication Details 出版详情

Publishing Policies 发布策略

This publication considers original works that enhance the existing body of knowledge. Results described in the article should not have been submitted or published elsewhere. Expanded versions of conference publications may be submitted. Articles must be intelligible and must be written in standard English.
该出版物考虑了增强现有知识体系的原创作品。文章中描述的结果不应在其他地方提交或发表。可以提交会议出版物的扩展版本。文章必须易于理解,并且必须用标准英语撰写。

Peer Review: Peer review is vital to the quality of published research. Each article submitted to IEEE is evaluated by at least two independent reviewers selected by a member of the publication's editorial board. Learn more about the IEEE peer review process.
同行评议:同行评议对已发表研究的质量至关重要。提交给IEEE的每篇文章都由出版物编辑委员会成员选出的至少两名独立审稿人进行评估。了解有关IEEE同行评审流程的更多信息。

Publication Fees: This publication is supported by subscriptions and applicable Article Processing Charges (APCs). Although there is no cost for publishing with IEEE, authors may wish to take advantage of some of our fee-based offerings; visit the IEEE Author Center for more information on available options.
出版费用:本出版物由订阅和适用的文章处理费 (APC) 支持。虽然在IEEE发表文章不收取任何费用,但作者可能希望利用我们的一些收费产品;访问IEEE作者中心,了解有关可用选项的更多信息。

Plan S Funded Authors: This is a Transformative Journal that is fully compliant with Plan S, enabling a Coalition S funded author to publish their research open access and be compliant with funder mandates. Read more about IEEE Transformative Journals.
S 计划资助的作者:这是一本完全符合 S 计划的变革性期刊,使 Coalition S 资助的作者能够发表他们的研究开放获取并遵守资助者的要求。阅读更多关于IEEE Transformative Journals的信息。

Errors in Published Articles: Authors who have detected an error in their published article should contact the Editor-in-Chief shown above to request the publication of a correction. Note that no change may be made to the original article after it is published in IEEE Xplore
已发表文章中的错误:在已发表文章中发现错误的作者应联系上述主编,要求发表更正。请注意,在IEEE Xplore上发表后,不得对原始文章进行任何更改。

Other Policies: 其他政策:

Information 信息

Sponsored by 赞助商

Editor-in-Chief 主编
Yu Sun 

Department of Mechanical and Industrial Engineering
机械与工业工程系
University of Toronto 多伦多大学
Toronto, ON M5S 3G8, Canada
多伦多, ON M5S 3G8, 加拿大
tase.eic.sun@outlook.com

Subjects 科目

Components, Circuits, Devices and Systems
组件、电路、器件和系统

Power, Energy and Industry Applications
电力、能源和工业应用

Robotics and Control Systems
机器人和控制系统

Previous Titles 以前的标题

(1989 - 2004)IEEE Transactions on Robotics and Automation
(1989 - 2004)IEEE Transactions on Robotics and Automation(IEEE机器人与自动化汇刊)
(1985 - 1988)IEEE Journal on Robotics and Automation
(1985 - 1988)IEEE机器人与自动化杂志

  • 25
    点赞
  • 19
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

资源存储库

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值