hcip第十一天作业

实验要求：

拓扑结构以及配置：

首先进行ip的配置

[R1]
 
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              10.0.12.1/24         up         up        
GigabitEthernet0/0/1              10.0.15.1/24         up         up        
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         192.168.1.1/24       up         up(s)     
NULL0                             unassigned           up         up(s)  
 
[R2]
 
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              10.0.12.2/24         up         up        
GigabitEthernet0/0/1              172.16.23.2/24       up         up        
GigabitEthernet0/0/2              172.16.25.2/24       up         up        
LoopBack0                         172.16.0.2/32        up         up(s)     
LoopBack1                         172.16.2.1/24        up         up(s)     
NULL0                             unassigned           up         up(s)    
 
[R3]
 
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              172.16.36.3/24       up         up        
GigabitEthernet0/0/1              172.16.23.3/24       up         up        
GigabitEthernet0/0/2              172.16.34.3/24       up         up        
LoopBack0                         172.16.0.3/32        up         up(s)     
LoopBack1                         172.16.3.1/24        up         up(s)     
NULL0                             unassigned           up         up(s)    
 
[R4]
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              unassigned           down       down      
GigabitEthernet0/0/1              172.16.47.4/24       up         up        
GigabitEthernet0/0/2              172.16.34.4/24       up         up        
LoopBack0                         172.16.0.4/32        up         up(s)     
LoopBack1                         172.16.4.1/24        up         up(s)     
NULL0                             unassigned           up         up(s)  
 
[R5]
 
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              10.0.15.5/24         up         up        
GigabitEthernet0/0/1              172.16.56.5/24       up         up        
GigabitEthernet0/0/2              172.16.25.5/24       up         up        
LoopBack0                         172.16.0.5/32        up         up(s)     
LoopBack1                         172.16.5.1/24        up         up(s)     
NULL0                             unassigned           up         up(s)  
 
[R6]
 
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              172.16.36.6/24       up         up        
GigabitEthernet0/0/1              172.16.56.6/24       up         up        
GigabitEthernet0/0/2              172.16.67.6/24       up         up        
LoopBack0                         172.16.0.6/32        up         up(s)     
LoopBack1                         172.16.6.1/24        up         up(s)     
NULL0                             unassigned           up         up(s)    
 
[R7]
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              10.0.78.7/24         up         up        
GigabitEthernet0/0/1              172.16.47.7/24       up         up        
GigabitEthernet0/0/2              172.16.67.7/24       up         up        
LoopBack0                         172.16.0.7/32        up         up(s)     
LoopBack1                         172.16.7.1/24        up         up(s)     
NULL0                             unassigned           up         up(s) 
 
[R8]
 
Interface                         IP Address/Mask      Physical   Protocol  
GigabitEthernet0/0/0              10.0.78.8/24         up         up        
GigabitEthernet0/0/1              unassigned           down       down      
GigabitEthernet0/0/2              unassigned           down       down      
LoopBack0                         192.168.8.1/24       up         up(s)     
NULL0                             unassigned           up         up(s)         

 在as2区域内起OSPF协议：

ospf 1
area 0
network 172.16.0.0 0.0.255.255

//并且修改网络类型

int l1
ospf network-type broadcast


//然后写MPLS

[R2]mpls lsr-id 172.16.0.2	
[R2]mpls 
[R2-mpls]mpls ldp
[R2]int g 0/0/1
[R2-GigabitEthernet0/0/1]mpls 
[R2-GigabitEthernet0/0/1]mpls ldp
[R2-GigabitEthernet0/0/1]int g 0/0/2
[R2-GigabitEthernet0/0/2]mpls 

最后再写bgp并宣告AR1和AR8

[R1]bgp 1
[R1-bgp]router-id 1.1.1.1
[R1-bgp]peer 10.0.12.2 as-number 2
[R1-bgp]peer 10.0.15.5 as-number 2
 
[R2]bgp 2
[R2-bgp]router-id 172.16.0.2	
[R2-bgp]peer 10.0.12.1 as-number 1	
[R2-bgp]peer 172.16.0.5 as-number 2
[R2-bgp]peer 172.16.0.5 connect-interface LoopBack 0
[R2-bgp]peer 172.16.0.5 next-hop-local
[R2-bgp]peer 172.16.0.7 as-number 2
[R2-bgp]peer 172.16.0.7 connect-interface LoopBack 0
[R2-bgp]peer 172.16.0.7 next-hop-local
 
[R5]bgp 2
[R5-bgp]router-id 172.16.0.5	
[R5-bgp]peer 10.0.15.1 as-number 1
[R5-bgp]peer 172.16.0.2 as-number 2	
[R5-bgp]peer 172.16.0.2 connect-interface LoopBack 0
[R5-bgp]peer 172.16.0.2 next-hop-local
[R5-bgp]peer 172.16.0.7 as-number 2
[R5-bgp]peer 172.16.0.7 connect-interface LoopBack 0
[R5-bgp]peer 172.16.0.7 next-hop-local
 
[R7]bgp 2
[R7-bgp]router-id 172.16.0.7 
[R7-bgp]peer 172.16.0.2 as-number 2
[R7-bgp]peer 172.16.0.2 connect-interface LoopBack 0
[R7-bgp]peer 172.16.0.2 next-hop-local
[R7-bgp]peer 172.16.0.5 as-number 2
[R7-bgp]peer 172.16.0.5 connect-interface LoopBack 0
[R7-bgp]peer 172.16.0.5 next-hop-local
[R7-bgp]peer 10.0.78.8 as-number 3
 
[R8]bgp 3
[R8-bgp]router-id 8.8.8.8
[R8-bgp]peer 10.0.78.7 as-number 2


[R1]bgp 1	
[R1-bgp]network 192.168.1.0 24
 
[R8]bgp 3
[R8-bgp]network 192.168.8.0 24

然后实现

[R2]bgp 2
[R2-bgp]network 172.16.2.0 24
[R2-bgp]network 172.16.3.0 24
[R2-bgp]network 172.16.4.0 24

[R1]ip ip-prefix as permit 172.16.2.0 24
 
[R1]route-policy as permit node 10
[R1-route-policy]if-match ip-prefix as 
[R1-route-policy]apply as-path 2 2 2 additive 
	
[R1]route-policy as permit node 20
 
[R1]bgp 1
[R1-bgp]peer 10.0.12.2 route-policy as import 




[R5]bgp 2
[R5-bgp]network 172.16.5.0 24
[R5-bgp]network 172.16.6.0 24
[R5-bgp]network 172.16.7.0 24

然后测试：