supermicro board bios 升级 超微主板刷 bios

本文介绍了在超微主板遇到登录密码问题后,如何通过UEFI模式进行BIOS升级。步骤包括从官网下载对应主板的BIOS文件,将文件解压缩到FAT32格式的U盘,然后在UEFI SHELL环境下运行flash.nsh命令来刷新BIOS,最终重启完成升级。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

supermicro board bios 升级超微主板刷 bios UEFI模式

公司买了个二手超微主板,超微主板bios进不去,提示要密码才能登陆。重置bios后只有第一次能进入bios,第二次就不能了,安装操作系统都没办法,这里介绍下超微主板刷bios的流程。

1.登陆超微官网,找到要刷的主板类型
超微官方找到要刷的主板
2.选择update bios
找下载的bios
3.下载BOIS文件ZIP包
下载ZIP包
4.BIOS刷新方式有两种,这里只讲UEFI一种方式,另一种DOS可以自己研究下,将ZIP包目录里面UEFI解压到文件格式是FAT32 U盘里。
5.插上U盘->开机->进入bios->在exit&save->选择UEFI SHELL,进入UEFI SHELL界面如下:
UEFI SHELL<

X9DAI 主板NVME BIOS文件 基于官方最新3.3版(8.712)添加nvme模块 ================================================ Standard BIOS Update Procedure ================================================ 1. Save this BIOS update package to your computer. 2. Extract the files to a DOS bootable device (such as a bootable USB stick, or a CD). 3. Boot to a DOS prompt and type AMI.BAT BIOSname.### to start the BIOS update. 4. Do not interrupt the process until the BIOS update is complete. 5. After the message indicating BIOS update has completed, unplug the AC, clear the CMOS, and then plug in the AC, power on the system. 6. Go to the BIOS configuration, load the default setting, save and exit the BIOS. ================================================ BIOS Recovery (see user's manual for details) ================================================ Recovery BIOS with a USB Drive If the BIOS file is corrupted and the system is not able to boot up, this feature will allow you to recover the BIOS image using a USB-attached device. A USB flash drive or a USB CD/DVD ROM drive may be used for this purpose. Please note that the USB hard disk drive is NOT supported at this moment. Follow the procedure below to recover the BIOS. 1. Use a different system, copy the standard BIOS binary image file into a USB flash drive or a writable CD/DVD disc's Root Directory, and rename the file to 揝UPER.ROM? 2. While the system is turned off, insert the USB device that contains the new BIOS binary image (揝UPER.ROM?. 3. Right after powering on the system, press and hold and keys together until the USB device's LED indicator comes on. This may take a few seconds or up to one minute to start the process. 4. Once the USB device's LED is on, release the and keys. The system may generate beep codes to indicate that the BIOS ROM firmware is being reprogrammed, and a message may also be displayed on the screen. DO NOT INTERRUPT THIS PROCESS UNTIL IT扴 FINISHED! 5. After the Boot Sector Recovery Process is complete, the system will reboot automatically. 6. Boot into USB drive again. When DOS prompt appear, please type AMI.BAT BIOSname.### to start BIOS update, just like in standard procedure. 7. Do not interrupt the process until the BIOS update is complete. 8. After you see the message of BIOS has completed the update, unplug the AC, clear the CMOS, and then plug in the AC, power on the system. Go to the BIOS configuration, load the default setting, save and exit the BIOS. Notes: * If the BIOS flash failed, you may contact our RMA Dept. to have the BIOS chip reprogrammed. This will require shipping the board to our RMA dept. for repair. Please submit your RMA request at http://www.supermicro.com/support/rma/. ********* BIOS Naming Convention ********** BIOS name : PPPPPSSY.MDD PPPPP : 5-Bytes for project name SS : 2-Bytes supplement for PPPPP Y : Year, 9 -> 2009, 0-> 2010, 1->2011 MDD : Month / Date E.g. BIOS with the build date: 2010/1/15: X8ST3-F -> X8ST30.115 X8SIL-F -> X8SIL0.115
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值