USB4规范正式公布,传输带宽高达40Gbps

关注、星标公众,不错过精彩内容

640?wx_fmt=jpeg

今年3月初,USB-IF官方组织宣布了下一代USB4™(注意不是USB 4.0)。

昨天(2019-09-03),USB-IF正式宣布发布USB4™规范。

USB绝对是科技史上应用范围最广的接口,而最新的USB4又是这一接口历史上最大的变革。

来自USB-IF官方公告:

640?wx_fmt=png

USB-IF官方地址:

https://www.usb.org

一、USB4™规范

USB4™规范内容如下(原文):

640?wx_fmt=jpeg

640?wx_fmt=jpeg

简单说明一下:

USB4引入了Intel此前捐献给USB推广组织的Thunderbolt雷电协议规范,双链路运行(Two-lane),传输带宽因此又翻了一番,达到40Gbps,也就是和雷电3完全相同。

USB4解决方案的主要特点包括:

使用现有USB Type-C®电缆进行双车道操作,并使用超过40Gbps认证电缆进行高达40Gbps的操作

多个数据和显示协议,有效地共享最大的聚合带宽

向后兼容USB 3.2、USB 2.0和Thunderbolt 3

在引入新的底层协议的同时,USB4仍然保持了良好的兼容性,可向下兼容USB 3.2/3.1/3.0、雷电3,也就是现在的USB、雷电3设备和数据线,仍然可以在USB4接口上使用

USB4将只有USB Type-C一种接口形态(雷电3也是它),并支持多种数据、显示协议,包括DisplayPort,可以一起充分利用高速带宽,也支持USB PD供电。

至于USB4设备何时面世,USB-IF组织并未给出明确时间表,毕竟USB 3.2(20Gbps)还没有成熟起来。

USB4™规范文档地址:

https://www.usb.org/sites/default/files/2019-09/USB-IF_USB4%20spec%20announcement_FINAL.pdf

二、为什么USB4可以使用雷电3的协议?

2011年英特尔和苹果合作开发雷电3接口,并在苹果产品上进行推广,那时候雷电3需要英特尔授权才可以搭载,也就是说必须像英特尔支付授权费,这样成本就变高了。

后来,英特尔直接将雷电协议规格免费共享给了USB推广组织,使得各类芯片制造商可以免费的生产雷电协议规格的芯片,并不需要支付专利费用。所以,USB4上便有了雷电3的协议。

三、对比USB之前版本

USB经历了这么多年发展,我们这一批人也算是见识了各个版本,这里简单说一下USB1 ~ USB3这些版本。

USB的叫法太多:有什么USB2.0、USB3.0、USB3.1、USB3.1 Gen1、USB3.2 Gen2,包括新发表的USB3.2及最新的USB4.0,还有什么USB Type-A,Type-C,USB公头、母头等。

它们都代表什么意思,你们知道吗?下面给大家看几张图,相信就能理解了。

1.USB接口

640?wx_fmt=jpeg

进一步细化直观接口图:

640?wx_fmt=png

2.USB速度

640?wx_fmt=png

好了,本文就写到这里,希望你们对USB有进一步的认识。


推荐阅读:

PCB生产中的过孔和背钻有哪些技术?

5G通信帧结构与常见通信有什么区别?

关注公众号『strongerHuang』,在后台回复“1024”,查看更多精彩内容,回复“加群”,可加入黄工的技术交流群。

640?wx_fmt=jpeg

长按识别图中二维码关注

This chapter presents an overview of Universal Serial Bus 4 (USB4™) architecture and key concepts. USB4 is similar to earlier versions of USB in that it is a cable bus supporting data exchange between a host computer and a wide range of simultaneously accessible peripherals. However, USB4 also allows a host computer to setup data exchange between compatible peripherals. The attached peripherals share bandwidth as configured by the host computer. The bus allows peripherals to be attached, configured, used, and detached while the host and other peripherals are in operation. When configured over a USB Type-C® connector interface, USB4 functionally replaces USB 3.2 while retaining USB 2.0 bus operating in parallel. Enhanced SuperSpeed USB, as defined in USB 3.2, remains the fundamental architecture for USB data transfer on a USB4 Fabric. The difference with USB4 versus USB 3.2 is that USB4 is a connection -oriented, tunneling architecture designed to combine multiple protocols onto a single physical interface, so that the total speed and performance of the USB4 Fabric can be dynamically shared. USB4 allows for USB data transfers to operate in parallel with other independent protocols specific to display, load/store and host-to-host interfaces. Additionally, USB4 extends performance beyond the 20 Gbps (Gen 2 x 2) of USB 3.2 to 40 Gbps (Gen 3 x 2) over the same dual-lane, dual-simplex architecture. This specification introduces the concept of protocol tunneling to USB bus architecture. Besides tunneling Enhanced SuperSpeed USB (USB3), display tunneling based on DisplayPort (DP) protocol and load/store tunneling based on PCI Express (PCIe) are defined. These protocol tunnels operate independently over the USB4 transport and physical layers. Additionally, USB4 allocates packets for bus configuration and management, and packe ts can be allocated specifically for host-to-host data connections.
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

strongerHuang

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值