实验目的
1、R5为ISP,只能进行1P地址配置,其所有地址均配为公有IP地址:
2、 R1和R5间使用ppp的PAP认证,Rs为主认证方;
R2与R5之间使用ppp的cHAP认证,
R5为主认证方1R3与R5之间使用HDLC封装;
3、R1、R2、R3构建一个NGRE环境,R1为中心站点,R1、R4间为点到点的GRER
4、整个私有网络基本RIP全网可达
5、所有PC设置私有1p为源IP,可以访问R5环回,达到全网通。
实验思路
1、按照图配置各路由器的接口IP地址
2、1)对认证方AR5进行配置:创建用户信息,指定认证用户业务类型,指定认证模式为PAP 对被认证方AR1进行配置:进入接口中添加PPP认证的用户信息
2)对认证方AR5进行配置:创建用户信息,指定认证用户业务类型,指定认证模式为CHAP 对认证方AR2进行配置:进入接口中添加PPP认证的用户信息
3)在AR3,AR5两边接口下修改链路类型,改为HDLC
3、1)AR1创建MGRE隧道接口Tunnel 0/0/0,创建NHRP域,配置IP地址,定义封装类型,定义被封装的源地址,配置NHRP,AR2和AR3加入到中心站点域100并注册自己的信息;都配置完后再查看NHRP邻居情况。
2)AR1创建GRE隧道接口Tunnel 0/0/1,AR1和AR4两端都配置IP地址,定义封装方式,定义被封装的源地址和目标地址。
4、添加缺省路由,指向运营商ISP;使用rip宣告网段地址的路由信息,再关闭rip的水平分割机制
5、配置 pc IP,使用NAT来实现作用
实验步骤
1、配置IP
[R1]int g0/0/0
[R1-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[R1]int Ser4/0/0
[R1-Serial4/0/0]ip add 15.1.1.1 24
同R1一样,完成配置
2、配置静态路由
[R1]ip route-static 0.0.0.0 0 15.1.1.5
[R2]ip route-static 0.0.0.0 0 25.1.1.5
[R3]ip route-static 0.0.0.0 0 35.1.1.5
[R4]ip route-static 0.0.0.0 0 45.1.1.5
2、R1和R5间使用PPP的PAP认证,R5为主认证方
# 认证方
[R5]aaa
[R5-aaa]local-user li password cipher 123456
Info: Add a new user.
[R5-aaa]local-user li service-type ppp
[R5-aaa]int ser4/0/1
[R5-Serial4/0/1]link-protocol ppp
[R5-Serial4/0/1]ppp authentication-mode pap
# 被认证方
[R1]int ser4/0/0
[R1-Serial4/0/0]link-protocol ppp
[R1-Serial4/0/0]ppp pap local-user li password cipher 123456
R2与R5之间使用ppp的CHAP认证,R5为主认证方
# 主认证方
[R5]aaa
[R5-aaa]local-user li password cipher 123456
[R5-aaa]local-user li service-type ppp
[R5-aaa]int ser3/0/1
[R5-Serial3/0/1]ppp authentication-mode chap
[R5-Serial3/0/1]link-protocol ppp
# 被认证方
[R2]int s4/0/0
[R2-Serial4/0/0]ppp chap user li
[R2-Serial4/0/0]ppp chap password cipher 123456
R3与R5之间使用HDLC封装
[R3]int s4/0/0
[R3-Serial4/0/0]link-protocol hdlc
[R5]int s4/0/0
[R5-Serial4/0/0]link-protocol hdlc
R1、R2、R3构建一个MGRE环境,R1为中心站点,R1、R4间为点到点的GRE
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 10.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre p2mp
[R1-Tunnel0/0/0]source 15.1.1.1
[R1-Tunnel0/0/0]nhrp network-id 100
[R1-Tunnel0/0/0]nhrp entry multicast dynamic
[R2]int Tunnel 0/0/0
[R2-Tunnel0/0/0]ip add 10.1.1.2 24
[R2-Tunnel0/0/0]tunnel-protocol gre p2mp
[R2-Tunnel0/0/0]source s4/0/0
[R2-Tunnel0/0/0]nhrp network-id 100
[R2-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register
[R3]int Tunnel 0/0/0
[R3-Tunnel0/0/0]ip add 10.1.1.3 24
[R3-Tunnel0/0/0]tunnel-protocol gre p2mp
[R3-Tunnel0/0/0]source s4/0/0
[R3-Tunnel0/0/0]nhrp network-id 100
[R3-Tunnel0/0/0]nhrp entry 10.1.1.1 15.1.1.1 register
完成MGRE配置后,现在完成 R1、R4间为点到点的GRE
[R1]int Tunnel 0/0/1
[R1-Tunnel0/0/1]ip add 10.1.2.1 24
[R1-Tunnel0/0/1]tunnel-protocol gre
[R1-Tunnel0/0/1]source 15.1.1.1
[R1-Tunnel0/0/1]destination 45.1.1.4
[R4]int Tunnel 0/0/1
[R4-Tunnel0/0/1]ip add 10.1.2.2 24
[R4-Tunnel0/0/1]tunnel-protocol gre
[R4-Tunnel0/0/1]source 45.1.1.4
[R4-Tunnel0/0/1]description 15.1.1.1
完成后仍然无法全网通,接下来使用rip完成全网可达
4、整个私有网络基本RIP全网可达
[R1]rip 1
[R1-rip-1]v 2
[R1-rip-1]undo summary
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 10.0.0.0
[R2]rip 1
[R2-rip-1]v 2
[R2-rip-1]undo summary
[R2-rip-1]network 192.168.2.0
[R2-rip-1]network 10.0.0.0
[R3]rip 1
[R3-rip-1]v 2
[R3-rip-1]undo summary
[R3-rip-1]network 192.168.3.0
[R3-rip-1]network 10.0.0.0
[R4]rip 1
[R4-rip-1]v 2
[R4-rip-1]undo summary
[R4-rip-1]network 192.168.4.0
[R4-rip-1]network 10.0.0.0
取消rip的水平分割机制
[R1]int t0/0/0
[R1-Tunnel0/0/0]undo rip split-horizon
所有PC设置IP
配置NAT
[R1]acl 2000
[R1-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]int s4/0/0
[R1-Serial4/0/0]nat outbound 2000
[R2]acl 2000
[R2-acl-basic-2000]rule permit source 192.168.2.0 0.0.0.255
[R2-acl-basic-2000]int s4/0/0
[R2-Serial4/0/0]nat outbound 2000
[R3]acl 2000
[R3-acl-basic-2000]rule permit source 192.168.3.0 0.0.0.255
[R3-acl-basic-2000]int s4/0/0
[R3-Serial4/0/0]nat outbound 2000
[R4]acl 2000
[R4-acl-basic-2000]rule permit source 192.168.4.0 0.0.0.255
[R4-acl-basic-2000]int g0/0/0
[R4-GigabitEthernet0/0/0]nat outbound 2000