一、隔离电源芯片
UCC12041-Q1 High-Efficiency, Low-EMI, 3-kVRMS Basic Isolation DC/DC Converter
UCC33420-Q1
Automotive, 5V/5V 1.5W 3kVrms isolated DC-DC module with integrated transformer
二、电荷泵芯片
1、ICL7660
2、MAX1044
3、TPS6040X,
1) LM2776:+V->-V,无稳压
2) LM27761:+V-> -n/mV,输出稳压,内部包含一个LDO
3) LM27762:内部包括正负两个LDO。
三、125℃器件
1、LM7705 Low-Noise Negative Bias Generator
输入3-5.5V,产生-0.232V的偏置电压,用于实现Rail-to-Rail放大器的0输出。
Features
• Regulated Output Voltage −0.232 V
• Output Voltage Tolerance 5%
• Output Voltage Ripple 4 mVPP
• Supply Voltage 3 V to 5.25 V
• Conversion Efficiency Up to 98%
• Quiescent Current 78 µA
• Shutdown Current 20 nA
• Turnon Time 500 µs
• Operating Temperature Range −40°C to 125°C
• 8-Pin VSSOP Package
Description
The LM7705 device is a switched capacitor voltageinverter with a low noise, −0.23 V fixed negativevoltage regulator. This device is designed to be usedwith low voltage amplifiers to enable the amplifiersoutput to swing to zero volts. The −0.23 V is used tosupply the negative supply pin of an amplifier whilemaintaining less then 5.5 V across the amplifier. Rail-to-Rail output amplifiers cannot output zero voltswhen operating from a single-supply voltage and canresult in error accumulation due to amplifier outputsaturation voltage being amplified by following gainstages. A small negative supply voltage will preventthe amplifiers output from saturating at zero volts andwill help maintain an accurate zero through a signalprocessing chain. Additionally, when an amplifier isused to drive an input of the ADC, the amplifier canoutput a zero voltage signal and the full input rangeof an ADC can be used. The LM7705 device has ashutdown pin to minimize standby powerconsumption.
2、TL7660I CMOS VOLTAGE CONVERTER
TL7660 datasheet https://www.ti.com/lit/ds/symlink/tl7660.pdf?ts=1724719534952&ref_url=https%253A%252F%252Fwww.ti.com%252Fpower-management%252Facdc-dcdc-converters%252Fproducts.html
特性
Simple Voltage Conversion, Including
• – Voltage Doubler
• Wide Operating Range…1.5 V to 10 V
• Requires Only Two External (Noncritical)Capacitors
• No External Diode Over Full Temperature andVoltage Range
• Typical Open-Circuit Voltage ConversionEfficiency…99.9%
• Typical Power Efficiency…98%• Full Testing at 3 V