【解决问题】Error (171016): Can't place node "" -- illegal location assignment

在quartus分配引脚以后编译出现如下问题：

Error (171016): Can't place node "" -- illegal location assignment 

查找到quartus有如下解释：

CAUSE:

The Fitter could not place the specified node due to the specified illegal location assignment. This error can occur when you edit Quartus II Settings File (.qsf) manually, or when you make a location assignment, select a different target device for the current design, and select No when you asked if you want to remove the location assignments. The location assignment is not supported for the new device.

ACTION:

To avoid receiving this message in the future, remove the location assignment from the specified node, or click Yes when you are asked if you want to remove location assignments when selecting a different device.

于是我采取如下措施：

查找器件是否设置正确，还是不行，重置一下芯片引脚【在device中先随机选 一个再选回来，中间问是不是重新分配引脚，选择是】

问题得到解决！