Time Limit: 1000MS | Memory Limit: 65536K | |||
Total Submissions: 8628 | Accepted: 3138 | Special Judge |
Description
As you know, all the computers used for ACM contests must be identical, so the participants compete on equal terms. That is why all these computers are historically produced at the same factory.
Every ACM computer consists of P parts. When all these parts are present, the computer is ready and can be shipped to one of the numerous ACM contests.
Computer manufacturing is fully automated by using N various machines. Each machine removes some parts from a half-finished computer and adds some new parts (removing of parts is sometimes necessary as the parts cannot be added to a computer in arbitrary order). Each machine is described by its performance (measured in computers per hour), input and output specification.
Input specification describes which parts must be present in a half-finished computer for the machine to be able to operate on it. The specification is a set of P numbers 0, 1 or 2 (one number for each part), where 0 means that corresponding part must not be present, 1 — the part is required, 2 — presence of the part doesn't matter.
Output specification describes the result of the operation, and is a set of P numbers 0 or 1, where 0 means that the part is absent, 1 — the part is present.
The machines are connected by very fast production lines so that delivery time is negligibly small compared to production time.
After many years of operation the overall performance of the ACM Computer Factory became insufficient for satisfying the growing contest needs. That is why ACM directorate decided to upgrade the factory.
As different machines were installed in different time periods, they were often not optimally connected to the existing factory machines. It was noted that the easiest way to upgrade the factory is to rearrange production lines. ACM directorate decided to entrust you with solving this problem.
Input
Input file contains integers P N, then N descriptions of the machines. The description of ith machine is represented as by 2 P + 1 integers Qi Si,1 Si,2...Si,P Di,1 Di,2...Di,P, where Qi specifies performance, Si,j — input specification for part j, Di,k — output specification for part k.
Constraints
1 ≤ P ≤ 10, 1 ≤ N ≤ 50, 1 ≤ Qi ≤ 10000
Output
Output the maximum possible overall performance, then M — number of connections that must be made, then M descriptions of the connections. Each connection between machines A and B must be described by three positive numbers A B W, where W is the number of computers delivered from A to B per hour.
If several solutions exist, output any of them.
Sample Input
Sample input 1 3 4 15 0 0 0 0 1 0 10 0 0 0 0 1 1 30 0 1 2 1 1 1 3 0 2 1 1 1 1 Sample input 2 3 5 5 0 0 0 0 1 0 100 0 1 0 1 0 1 3 0 1 0 1 1 0 1 1 0 1 1 1 0 300 1 1 2 1 1 1 Sample input 3 2 2 100 0 0 1 0 200 0 1 1 1
Sample Output
Sample output 1 25 2 1 3 15 2 3 10 Sample output 2 4 5 1 3 3 3 5 3 1 2 1 2 4 1 4 5 1 Sample output 3 0 0
Hint
生产线是全自动化的,所以需要机器来组成生产线,给定有多少中种机器,标准ACM用电脑有多少部份,每种机器将什么样的ACM电脑半成品处理成什么样的电脑半成品(对于输入的电脑半成品,每部分有0,1,2三种状态:代表着 0、这部分必须没有我才能处理,1、这部分必须有我才能处理,2、这部分有没有我都能处理。对于输出的电脑半成品有0,1两种状态:代表着0,处理完后的电脑半成品里没有这部分,1、处理完的电脑半成品有这部分),每一个机器每小时可以处理Q个半成品(输入数据中的Qi)。
求组装好的成产线的最大工作效率(每小时最多生成多少成品,成品的定义就是所有部分的状态都是“1”),和每两个机器之间的流量。
#include<stdio.h>
#include<stdio.h>
#include<queue>
#include<string.h>
#include<algorithm>
using namespace std;
#define inf 0x3f3f3f3f
int c[300][300];
int c1[300][300];
int f[300][300];
int a[300],pre[300];
struct node
{
int r;
int in[15];
int out[15];
} ma[60];
struct node1
{
int xx;
int yy;
int cc;
} aa[300];
int ans,sum,p,n,res,k,kk;
int link(node x,node y)
{
for(int i=1; i<=p; i++)
{
if(x.out[i]!=y.in[i]&&y.in[i]!=2)
{
return 0;
}
}
return 1;
}
void ek(int s,int t)
{
queue<int>q;
sum=0;
ans=0;
while(1)
{
memset(a,0,sizeof(a));
a[s]=inf;
q.push(s);
while(!q.empty())
{
int u=q.front();
q.pop();
for(int v=s; v<=t; v++)
{
if(!a[v]&&c[u][v]>f[u][v])
{
a[v]=min(a[u],c[u][v]-f[u][v]);
q.push(v);
pre[v]=u;
}
}
}
if(!a[t]) break;
for(int u=t; u!=s; u=pre[u])
{
f[pre[u]][u]+=a[t];
f[u][pre[u]]-=a[t];
c1[pre[u]][u]-=a[t];
c1[u][pre[u]]+=a[t];
}
sum+=a[t];
}
}
int main()
{
while(~scanf("%d%d",&p,&n))
{
memset(c,0,sizeof(c));
memset(f,0,sizeof(f));
for(int i=1; i<=p; i++)
{
ma[1].in[i]=0;
ma[1].out[i]=0;
ma[n+2].in[i]=1;
ma[n+2].out[i]=1;
}
ma[1].r=inf;
ma[n+2].r=inf;
for(int i=2; i<=n+1; i++)
{
scanf("%d",&ma[i].r);
for(int j=1; j<=p; j++)
scanf("%d",&ma[i].in[j]);
for(int j=1; j<=p; j++)
scanf("%d",&ma[i].out[j]);
}
n+=2;
for(int i=1; i<=n; i++)
{
for(int j=1; j<=n; j++)
{
if(i==j)
c1[i][j+n]=c[i][j+n]=ma[i].r;
if(link(ma[i],ma[j])&&i!=j)
c1[i+n][j]=c[i+n][j]=ma[i].r;
}
}
ek(1,2*n);
int k=0;
for(int i=2; i<n; i++)
for(int j=2; j<n; j++)
{
if(c[i+n][j]>c1[i+n][j])
{
aa[k].xx=i-1;
aa[k].yy=j-1;
aa[k].cc=c[i+n][j]-c1[i+n][j];
k++;
}
}
printf("%d %d\n",sum,k);
for(int i=0; i<k; i++)
printf("%d %d %d\n",aa[i].xx,aa[i].yy,aa[i].cc);
}
}
/*
两组特殊数据
输入
3 5
10 0 0 0 0 1 0
10 0 0 0 0 1 0
10 0 1 0 0 1 1
10 0 1 1 1 1 1
10 0 1 1 1 1 1
输出
10 2
1 3 10
3 4 10
输入
3 11
10 2 2 2 0 0 1
20 2 2 2 0 1 1
30 2 2 2 0 0 1
40 2 2 2 0 1 1
50 2 2 2 0 0 1
1000 2 2 1 1 0 0
50 1 2 2 1 1 1
40 1 2 0 1 1 1
30 1 0 2 1 1 1
20 1 0 0 1 1 1
10 1 2 2 1 1 1
输出
150 10
1 6 10
2 6 20
3 6 30
4 6 40
5 6 50
6 7 50
6 8 40
6 9 30
6 10 20
6 11 10
*/