什么是组合逻辑电路，以及用真值表描述组合逻辑。

In the previous exercises, we used simple logic gates and combinations of several logic gates. These circuits are examples of combinational circuits. Combinational means the outputs of the circuit is a function (in the mathematics sense) of only its inputs. This means that for any given input value, there is only one possible output value. Thus, one way to describe the behaviour of a combinational function is to explicitly list what the output should be for every possible value of the inputs. This is a truth table.

For a boolean function of N inputs, there are 2N possible input combinations. Each row of the truth table lists one input combination, so there are always 2N rows. The output column shows what the output should be for each input value.

 

Row	Inputs			Outputs
number	x3	x2	x1	f
0	0	0	0	0
1	0	0	1	0
2	0	1	0	1
3	0	1	1	1
4	1	0	0	0
5	1	0	1	1
6	1	1	0	0
7	1	1	1	1

The above truth table is for a three-input, one-output function. It has 8 rows for each of the 8 possible input combinations, and one output column. There are four inputs combinations where the output is 1, and four where the output is 0.

Synthesizing a circuit from a truth table

Suppose we want to build the above circuit, but we're limited to using only the set of standard logic gates. How would you build arbitrary logic functions (expressed as a truth table)?

One simple method to create a circuit that implements the truth table's function is to express the function in sum-of-products form. Sum (meaning OR) of products (meaning AND) means using one N-input AND gate per row of the truth table (to detect when the input matches each row), followed by an OR gate that chooses only those rows that result in a '1' output.

For the above example, the output is '1' if the input matches row 2 or row 3 or row 5 or row 7 (This is a 4-input OR gate). The input matches row 2 if x3=0 and x2=1 and x1=0 (This is a 3-input AND gate). Thus, this truth table can be implemented in canonical form by using 4 AND gates that are ORed together.

A Bit of Practice

Create a combinational circuit that implements the above truth table.

 

 

代码：

module top_module( 
    input x3,
    input x2,
    input x1,  // three inputs
    output f   // one output
);
    wire    f_1,f_2,f_3,f_4;

    assign f_1 = ~x1 & x2 & ~x3;
    assign f_2 = x1 & x2 & ~x3;
    assign f_3 = x1 & ~x2 & x3;
    assign f_4 = x1 & x2 & x3;
    assign f = f_1 | f_2 | f_3 | f_4;

endmodule
 

 

转载于：https://hdlbits.01xz.net/wiki/Truthtable1