Credits
Any credits to a sponsoring agency should appear in the acknowledgments section,unless the agency requires different placement.
If it is necessary to include this information on the front page, use \thanks in either the \author or \title commands. For example:
任何赞助机构的信用应出现在鸣谢部分，除非机构需要不同的位置。
如果有必要将此信息包含在首页，请在\author或\title命令中使用\thanks。例如:
Multiple\ thanks command scan be given.
Eachwillresultin a separate footnote indication in the author or title with the corresponding text at the botton of the first column of the document. Note that the \thanks command is fragile. You will need to use\protect. Please do not include\pubnote commands in your document.
多个\感谢命令扫描被给予。
每一项都会在作者或标题中产生一个单独的脚注，并在文档第一栏的按下显示相应的文本。注意，\thanks命令很脆弱。您将需要使用\保护。请不要在您的文档中包含\pubnote命令。
Abstract
Follow the example command sin this document for creation of your abstract.
The command \begin{abstract} will automatically indent the text block.
Please do not indent it further. Do not include references in your abstract!
按照本文档中的示例命令创建摘要。
命令\begin{abstract}将自动缩进文本块。
请不要再缩进一点。不要在你的摘要中包括参考文献！
PageNumbers
Do not ever print any page numbers on your paper.
The use of\ pagestyle is forbidden
不要在纸上打印任何页码。
禁止使用\pagestyle
Text
The main body of the paper must be formatted in black, ten point Times Roman with twelve-point leading (line spacing).
You may not reduce font size or the linespacing.
Commands that alter font size or line spacing (including, but not limitedtobaselinestretch,baselineshift,linespread,andothers) are expressly forbidden.
In addition, you may not use color in the text.
正文纸张正文必须用黑色、十点乘罗马、十二点行距（行距）格式。
不能减小字号或行距。
明确禁止更改字体大小或行距的命令（包括但不限于baselinestretch、baselineshift、linespread等）。
另外，你不能在文本中使用颜色。
Citations
Citations within the text should include the author’s last name and year, for example (Newell 1980).
Append lowercase letters to the year in cases of ambiguity.
Multiple authors should be treated as follows:
(Feigenbaum and Engelmore1988)or(Ford,Hayes,andGlymour1992).
In the case off our or more authors, list only the first author , followed by et al. (Ford et al. 1997).
文本中的引用应该包括作者的姓和年，例如（Newell 1980）。
在年份后面加上小写字母以防歧义。
多作者应按如下方式处理：
（Feigenbaum和Engelmore 1988）或（Ford、Hayes和Glymour1992）。
在我们或更多作者的案例中，仅列出第一作者，其次是et al.（Ford et al.1997）。
Extracts
Long quotations and extracts should be indented ten points from the left and right margins
This is an example of an extract or quotation. Note the indentonbothsides.
Quotation marks are not necessary if you offset the text in a block like this, and properly identify and cite the quotation in the text.
冗长的引文和摘录应该从左右两边的空白处缩进十个点
这是一个摘录或引文的例子。注意两边的凹痕。
如果在这样的块中偏移文本，并且正确地标识和引用文本中的引号，则不需要引号。
Footnotes
Avoid footnotes as much a spossible;
they interrupt the reading of the text.
When essential, they should be consecutively numbered throughout with superscript Arabic numbers
.Footnotes should appear at the bottom of the page,separated from the text by a blank line space and a thin, halfpoint rule.
尽可能避免脚注；
他们打断了课文的阅读。
必要时，应使用上标阿拉伯数字连续编号
。脚注应该出现在页面底部，用一个空白行和一个细的半点规则与文本分开。
Section Headings.
Sections should be arranged and headed as follows:
Acknowledgments.
The acknowledgments section, if included, appears after the main body of text and is headed “Acknowledgments.”
This section includes acknowledgments of help from associates and colleagues, credits to sponsoring agencies, financial support, and permission to publish.
Please acknowledge other contributors, grant support, and so forth, in this section.
Do not put acknowledgments in a footnote on the first page. If your grant agency requires acknowledgment of the grant on page 1, limit the footnote to the required statement, and put the remaining acknowledgments at the back.
Please try to limit acknowledgments to no more than three sentences.
Appendices.
Any appendices follow the acknowledgments, if included, or after the main body of text if no acknowledgments appear.
章节标题。
各部分的排列和标题如下：
致谢。
“确认”部分（如果包含）将出现在正文后面，标题为“确认”
本节包括员工和同事的帮助致谢、赞助机构的贷款、财务支持和出版许可。
在本节中，请确认其他贡献者、给予支持等等。
请勿在首页的脚注中填写确认函。如果您的资助机构要求在第1页上确认拨款，请将所需声明的脚注限制在脚注内，并将剩余的确认书放在后面。
请尽量不要超过三句话。
附录。
任何附录都在确认之后（如果包含），或者如果没有出现确认，则在正文后面。
References.
The references section should be labeled “References” and should appear at the very end of thepaper (don’t end the paper with references,and then put a figure by itself on the last page).
A sample list of references is given later on in these instructions.
Please use a consistent format for references.
Poorly prepared or sloppy references reflect badly on the quality of your paperand your research. Please prepare complete and accurate citations.
参考文献部分应标记为“参考文献”，并应出现在论文的最后一页（不要在论文末尾加上参考文献，然后在最后一页上单独放一个图表）。
参考文献的样本列表在后面的说明中给出。
请使用一致的格式作为参考。
准备不足或草率的参考文献会严重影响论文和研究的质量。请准备完整准确的引文。
Illustrations and Figures
Your paper must compile in PDFL ATEX.
Consequently, all your figures must be .jpg, .png, or .pdf.
You may not use the.gif(theresolutionistoolow),.ps,or.epsfileformatfor your figures.
插图和图表你的论文必须用pdflatex编译。
因此，您的所有配置文件必须是.jpg、.png或.pdf。
你不能使用.gif文件（TheResolutionsToolow），.ps，或.eps图的格式。
Figure 1: Using the trim and clip commands produces fragile layers that can result in disasters (like this one from an actual paper) when the color space is corrected or the PDF combined with others for the final proceedings.
Crop your figures properly in a graphics program – not in LaTeX
图1：使用trim和clip命令会生成脆弱的图层，当颜色空间被更正或PDF与其他文档合并以进行最终处理时，这些图层可能会导致灾难（如这张来自实际纸张）。
在图形程序中正确裁剪您的配置，而不是在LaTeX中
Figures, drawings, tables, and photographs should be placed throughout the paper on the page (or the subsequent page) where they are first discussed.
Do not group them together at the end of the paper.
If placed at the top of the paper,illustrationsmayrunacrossbothcolumns.
Figuresmust not invade the top, bottom, or side margin areas.
Figures must be inserted using the \usepackage{graphicx}.
Number figures sequentially, forexample, figure1, and soon.
Do not use minipage to group figures.
图、图、表和照片应放在论文的第一页（或下一页）上。
不要把它们放在论文的末尾。
如果放在纸的顶部，两个列上可能都有插图。
图形不得侵入顶部、底部或侧面边缘区域。
必须使用\usepackage{graphicx}插入图形。
数字按顺序配置，例如图1等。
不要使用minipage对配置文件进行分组。
If you normally create your figures using pgfplots, please create the figures first, and then import them as pdfs with proper bounding boxes,as the bounding and trim boxes created by pfgplots are fragile and not valid.
如果您通常使用pgfplots创建配置文件，请首先创建配置文件，然后将其作为带有适当边界框的PDF文件导入，因为由pfgplots创建的边界和修剪框非常脆弱且无效。
When you include your figures, you must crop them outside of L ATEX.
The command \includegraphics*[clip=true, viewport001010]...might result in a PDF that looks great, but the image is not really cropped.
The full image can reappear (and obscure what ever it is overlapping) when page numbers are applied or color space is standardized.
Figures 1, and 2 display some unwanted results that often occur.
当您包括您的配置文件时，您必须在L ATEX之外进行裁剪。
命令\includegraphics*[clip=true，viewport001010]…可能会生成看起来不错的PDF，但图像并没有真正裁剪。
当应用页码或标准化颜色空间时，完整的图像可以重新出现（并掩盖重叠的部分）。
图1和图2显示了一些经常出现的不需要的结果。
If your paper includes illustrations that are not compatible with PDFTEX (suchas.epsor.psdocuments), you will need to convert them.
The epstopdf package will usually work for eps files.
You will need to convert your ps files to PDF however.
如果您的论文包含与PDFTEX不兼容的插图(suchas.epsor.psdocuments公司)，您需要转换它们。
epstopdf包通常适用于eps文件。
但是，您需要将文件转换为PDF格式。
Figure Captions.
The illustration number and caption must appear under the illustration.
Labels, and other text with the actual illustration must be at least nine-point type.
However, the font and size of figure captions must be 10 point roman.
Do not make them smaller, bold, or italic. (Individual words may be italicized if the context requires differentiation.)
插图编号和标题必须出现在插图下方。
带有实际插图的标签和其他文本必须至少为九点类型。
但是，图表标题的字体和大小必须为10磅罗马字体。
不要使它们变小、加粗或斜体。（如果上下文需要区分，单个单词可以用斜体表示。）
Tables
Tables should be presented in 10 point roman type.
If necessary, they may be altered to 9 point type.
You may not use any commands that further reduce point size below nine points.
Tables that do not fit in a single column must be placed across double columns.
If your table won’t fit within the margins even when spanning both columns, you must split it.
Do not use minipage to group tables.
表格应采用10点罗马字体。
如有必要，可改为9点式。9是samll
不能使用任何进一步将点大小减小到9点以下的命令。
不在一列中的表必须跨两列放置。
如果您的表格即使跨越两列也不在页边距内，则必须将其拆分。
不要使用minipage对表进行分组。
Table Captions.
The number and caption for your table must appear under (not above) the table.
Additionally, the font and size of table captions must be 10 point roman and must be placed beneath the figure.
Do not make them smaller, bold, or italic. (Individual words may be italicized if the context requires differentiation.)
表格的编号和标题必须出现在表格下方（而不是上方）。
此外，表格标题的字体和大小必须为10磅罗马字体，并且必须放在图表下方。
或者不要用斜体，或者用斜体。（如果上下文需要区分，单个单词可以用斜体表示。）
Low-Resolution Bitmaps.
You may not use lowresolution (such as 72 dpi) screen-dumps and GIF files—these files contain so few pixels that they are always blurry, and illegible when printed.
If they are color, they will become an indecipherable mess when converted to blackandwhite.
This is always the case with gif files, which should never be used.
There solution of screen dumps can be increased by reducing the print size of the original file while retaining the same number of pixels.
You can also enlarge files by manipulating them in software such as PhotoShop.
Your figures should be 300 dpi when incorporated into your document.
您不能使用低分辨率（如72 dpi）屏幕转储和GIF文件这些文件包含的像素太少，以至于打印时总是模糊和难以辨认。
如果它们是彩色的，当它们转换成黑白时，它们将变成一团难以辨认的混乱。
gif文件总是这样，永远不要使用。
屏幕转储的解决方案可以通过减小原始文件的打印大小来增加，同时保持相同的像素数。
您也可以通过在PhotoShop等软件中操作文件来放大文件。
当您的配置文件合并到您的文档中时，您的配置文件应为300 dpi。
L ATEX Overflow.
L ATEX users please beware:
L ATEX will sometimes put portions of the figure or table or an equation in the margin.If this happens, you need to make the figure or table span both columns.
If absolutely necessary, you may reduce the figure, or reformat the equation, or reconfigure the table.
Check your log file! You must fix any overflow into the margin (that means no overfull boxes in L ATEX).
Nothing is permitted to intrude into the margin orgutter.
L ATEX用户请注意：
ATEX有时会将图表或表格或方程式的一部分放在页边空白处。
如果发生这种情况，则需要使figure或表格同时跨越两列。
如果绝对必要，您可以减少图表，或重新格式化方程式，或重新配置表格。
检查你的日志文件！您必须将任何溢油填充到空白处（这意味着在L ATEX中没有过满的箱子）。
任何东西都不允许侵入边缘或出口。
Using Color.
Use of color is restricted to figures only.
It must be WACG 2.0 compliant. (That is, the contrast ratio must be greater than 4.5:1 no matter the font size.)
It must be CMYK,NOT RGB.Itmayneverbeused forany portion of the text of your paper.
The archival version of your paper will be printed in black and white and grayscale.
The web version must be readable by persons with disabilities.
Consequently, because conversion to grayscale can cause undesirable effects (red changes to black, yellow can disappear, and so forth), we strongly suggest you avoid placing color figures in your document.
If you do include color figures, you must (1) use the CMYK (not RGB) colorspace and (2) be mindful of readers who may happen to have trouble distinguishing colors.
Yourpapermustbedecipherablewithout using color for distinction
颜色的使用仅限于图形。
它必须符合WACG 2.0。（即无论字体大小，对比度必须大于4.5:1 。）
一定是CMYK，不是RGB。它可能永远不会被欺骗对于你论文的任何部分。
你论文的存档版本将以黑白和灰度打印。
网络版本必须能被残疾人阅读。
因此，由于转换为灰度会导致不良效果（红色变为黑色，黄色可能消失，等等），我们强烈建议您避免在文档中放置颜色配置。
如果您确实包括颜色配置，您必须
（1）使用CMYK（而不是RGB）颜色空间，
（2）注意可能会有困难的读者区分颜色。
你的纸不需要用颜色来区分
Drawings.
We suggest you use computer drawing software (such as Adobe Illustrator or, (if unavoidable), the drawing tools in Microsoft Word) to create your illustrations.
Do not use Microsoft Publisher.
These illustrations will look best if all line widths are uniform (half- to twopoint in size), and you do not create labels over shaded areas.
Shading should be 133 lines per inch if possible.
Use Times Roman or Helvetica for all figure call-outs.
Do not use hairline width lines — be sure that the stroke width of all lines is at least .5 pt.
Zero point lines will print on a laser printer,but will completely disappear on the high-resolution devices used by our printers.
我们建议您使用计算机绘图软件（如Adobe Illustrator或（如果不可避免的话）Microsoft Word中的绘图工具）来创建插图。
不要使用Microsoft Publisher。
如果所有的线条宽度都是统一的（大小的一半到两点），并且不在阴影区域上创建标签，这些插图将看起来最好。
如果可能，底纹应为每英寸133行。
使用Times Roman或Helvetica进行所有配置呼叫。
不要使用发际线宽度线条-确保所有线条的笔划宽度至少为0.5磅。
零点线将在激光打印机上打印，但在打印机使用的高分辨率设备上会完全消失。
Photo graphs and Images.
Photographs and other images should bein grayscale (colo rphoto graphs will not reproduce well;
for example, red tones will reproduce as black, yellow mayturntowhite,andsoforth) and set to a minimum of 300 dpi.
Do not prescreen images.
Resizing Graphics.
Resize your graphics before you include them with LaTeX.
You may not use trim or clip options as part of your \includegraphics command.
Resize the media box of your PDF using a graphics program instead.
Fonts in Your Illustrations.
You must embed all fonts in your graphics before including them in your LaTeX document.
照片和其他图像
应为光线比例（彩色照片不能很好地再现；
例如，红色色调将复制为黑色、黄色可能变为白色和soforth），并设置为最小300 dpi。
不要预筛选图像。
调整图形大小。
调整你的图形之前，你包括他们与乳胶。
不能将修剪或剪裁选项用作\includegraphics命令的一部分。
改用图形程序调整PDF的媒体盒大小。
插图中的字体。
在将所有字体包括在LaTeX文档中之前，必须在图形中嵌入所有字体
References
The AAAI style includes a set of definitions for use in formattingreferences with BibTeX.
These definitions make the bibliography style fairly close to the one specified below.
To use these definitions, you also need the BibTeX style file “aaai21.bst,” available in the AAAI Author Kit on the AAAI web site.
Then, at the end of your paper but before \enddocument, you need to put the following lines:
AAAI样式包括一组用于BibTeX格式化引用的定义。
这些定义使得书目风格相当接近下面的一种。
要使用这些定义，还需要BibTeX样式的文件“aaai21.bst”，可从AAAI网站的AAAI作者工具包中获得。
然后，在论文末尾，但在文档之前，您需要将以下行放入：
Please note that the aaai21.sty class already sets the bibliographystyle for you, so you do not have to place any
\bibliographystyle command in the document yourselves.
The aaai21.sty file is incompatible with the hyperref and navigator packages.
If you use either, your references will be garbled and your paper will be returned to you.
References may be the same size as surrounding text.
However, in this section (only), you may reduce the size to \small if your paper exceeds the allow able number of pages. Making it any smaller than 9 point with 10 point linespacing, however, is not allowed.
A more precise and exact method of reducing the size of your references minimally is by means of the following command:
请注意aaai21.sty类已经为您设置了书目样式，因此您不必放置任何
\您自己在文档中使用书目样式命令。
aaai21.sty文件与hyperref和navigator软件包不兼容。
如果你使用其中一个，你的参考资料将被弄乱，你的论文将被退回给你。
引用的大小可以与周围的文本相同。
但是，在本节中，如果您的论文超出了允许的页数，您可以将大小缩小到\小。但是，不允许使用10个点的行距使其小于9点。
通过以下命令可以更精确、更精确地减小引用的大小：
扫一扫
141
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
