本次移植是使u-boot支持网络,并能使用tftp功能,以及支持命令补全功能。
本次移植建立在上次版本上。
首先修改real210.h在最后增加下面的代码
/*
* Ethernet Contoller driver 网络配置
*/
#define CONFIG_DM9000
#define CONFIG_DRIVER_DM9000 1
#define CONFIG_DM9000_BASE (0x88000300)
#define CONFIG_DM9000_USE_16BIT
#define DM9000_IO CONFIG_DM9000_BASE
#define DM9000_DATA (CONFIG_DM9000_BASE+0x4)
#define DM9000_16BIT_DATA
#define CONFIG_CMD_PING
#define CONFIG_BOOTARGS "console=ttySAC2,115200 noinitrd root=/dev/mtdblock2 init=/linuxrc"
#define CONFIG_ETHADDR 00:22:12:34:56:90
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 192.168.1.20
#define CONFIG_SERVERIP 192.168.1.22
#define CONFIG_GATEWAYIP 192.168.1.1
/*auto complete command*/
#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE /*实现命令补全功能*/
#define CONFIG_
具体的地址为什么是这个地址,请参考s5pv210的用户手册。
然后修改板级文件real210.c,改成如下:
/*
* Copyright (C) 2008-2009 Samsung Electronics
* Minkyu Kang <mk7.kang@samsung.com>
* Kyungmin Park <kyungmin.park@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sromc.h>
#include <asm/arch/gpio.h>
#include <netdev.h>
#include <s5pc110.h>
#define DM9000_Tacs (0x0) // 0clk address set-up
#define DM9000_Tcos (0x4) // 4clk chip selection set-up
#define DM9000_Tacc (0xE) // 14clk access cycle
#define DM9000_Tcoh (0x1) // 1clk chip selection hold
#define DM9000_Tah (0x4) // 4clk address holding time
#define DM9000_Tacp (0x6) // 6clk page mode access cycle
#define DM9000_PMC (0x0) // normal(1data)page mode configuration
#define CS8900_Tacs (0x0) // 0clk address set-up
#define CS8900_Tcos (0x3) // 4clk chip selection set-up
#define CS8900_Tacc (0x7) // 14clk access cycle
#define CS8900_Tcoh (0x1) // 1clk chip selection hold
#define CS8900_Tah (0x3) // 4clk address holding time
#define CS8900_Tacp (0x6) // 6clk page mode access cycle
#define CS8900_PMC (0x0) // normal(1data)page mode configuration
DECLARE_GLOBAL_DATA_PTR;
static void dm9000_pre_init(void)
{
unsigned int tmp;
#if defined(DM9000_16BIT_DATA)
SROM_BW_REG &= ~(0xf << 4);
SROM_BW_REG |= (0<<7) | (0<<6) | (1<<5) | (1<<4);
#else
SROM_BW_REG &= ~(0xf << 20);
SROM_BW_REG |= (0<<19) | (0<<18) | (0<<16);
#endif
#ifdef CONFIG_SMC911X
SROM_BC1_REG = ((CS8900_Tacs<<28)+(CS8900_Tcos<<24)+(CS8900_Tacc<<16)+(CS8900_Tcoh<<12)+(CS8900_Tah<<8)+(CS8900_Tacp<<4)+(CS8900_PMC));
#endif
#ifdef CONFIG_DRIVER_DM9000
SROM_BC1_REG = ((DM9000_Tacs<<28)|(DM9000_Tcos<<24)|(DM9000_Tacc<<16)|(DM9000_Tcoh<<12)|(DM9000_Tah<<8)|(DM9000_Tacp<<4)|(DM9000_PMC));
#endif
tmp = MP01CON_REG;
tmp &=~(0xf<<4);
tmp |=(2<<4);
MP01CON_REG = tmp;
}
int board_init(void)
{
#ifdef CONFIG_SMC911X
smc9115_pre_init();
#endif
#ifdef CONFIG_DRIVER_DM9000
dm9000_pre_init();
#endif
gd->bd->bi_arch_number = MACH_TYPE_SMDKC100;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE)*2;
/*long unsigned int size1,size2;
size1 = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
size2 = get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE);
gd->ram_size = size1 + size2;*/
return 0;
}
void dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
#ifdef CONFIG_DISPLAY_BOARDINFO
int checkboard(void)
{
printf("Board:\treal210\n");
return 0;
}
#endif
int board_eth_init(bd_t *bis)
{
int rc = 0;
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
#ifdef CONFIG_DM9000
rc = dm9000_initialize(bis);
#endif
return rc;
}
与之间具体的不同请自行对比。
主要就是这些了,make一下,试试。
成功的结果如下所示: