RIP实验

实验需求

1. 路由器上分别配置环回；
2. 连接路由器的线路网段为12.1.1.0/24、23.1.1.0/24；
3. R1和R3连接的网络地址分别为192.168.1.0/24、192.168.2.0/24；
4. 整个网络使用RIP达到全网可达。

实验步骤

配IP

[R1]interface Ethernet 0/0/0
[R1-Ethernet0/0/0]ip address 192.168.1.254 24
[R1-Ethernet0/0/0]q
[R1]interface Ethernet 0/0/1	
[R1-Ethernet0/0/1]ip address 12.1.1.1 2
[R1-Ethernet0/0/1]q
[R1]interface LoopBack 0
[R1-LoopBack0]ip address 1.1.1.1 32
[R1-LoopBack0]q

[R2]interface Ethernet 0/0/0
[R2-Ethernet0/0/0]ip address 12.1.1.2 24
[R2-Ethernet0/0/0]q
[R2]interface Ethernet 0/0/1
[R2-Ethernet0/0/1]ip address 23.1.1.2 24
[R2-Ethernet0/0/1]q
[R2]interface LoopBack 0
[R2-LoopBack0]ip address 2.2.2.2 32
[R2-LoopBack0]q

[R3]interface Ethernet 0/0/0
[R3-Ethernet0/0/0]ip address 23.1.1.3 24
[R3-Ethernet0/0/0]q
[R3]interface Ethernet 0/0/1
[R3-Ethernet0/0/1]ip address 192.168.2.254 24
[R3-Ethernet0/0/1]q
[R3]interface LoopBack 0
[R3-LoopBack0]ip address 3.3.3.3 32
[R3-LoopBack0]q

 检查

启动rip

[R1]rip 1
[R1-rip-1]version 2
[R1-rip-1]undo summary
[R1-rip-1]network 192.168.1.0
[R1-rip-1]network 12.0.0.0
[R1-rip-1]network 1.0.0.0

[R2]rip 1
[R2-rip-1]version 2
[R2-rip-1]undo summary
[R2-rip-1]network 12.0.0.0
[R2-rip-1]network 23.0.0.0
[R2-rip-1]network 2.0.0.0

[R3]rip 1
[R3-rip-1]version 2
[R3-rip-1]undo summary
[R3-rip-1]network 23.0.0.0
[R3-rip-1]network 192.168.2.0
[R3-rip-1]network 3.0.0.0

 验证信息

R1

R2 

 R3

测试数据是否可以正常联通