嵌入式学习(39)-基于STM32的GPIO电平反转检测

一、概述

        项目中需要用的IO口的检测，主要是脉冲触发，所以需要去除由于扫描频率太快导致的二次捕捉误判，需要进行反转检测。

二、应用

        利用AI生成了一段代码

int main(void) {
    uint8_t lastState = 0;
    uint8_t currentState = 0;

    // Initialize GPIO
    GPIO_Config();

    while (1) {
        // Read the current state of PA0
        currentState = GPIO_ReadInputDataBit(GPIOA, GPIO_Pin_0);

        // Check if there is a change in state
        if (currentState != lastState) {
            // State has changed, handle the event here
            if (currentState == Bit_RESET) {
                // PA0 is now low
                // Add your code to handle the low state
            } else {
                // PA0 is now high
                // Add your code to handle the high state
            }

            // Update the last state
            lastState = currentState;
        }
    }
}