What is high-pressure cleaning vehicle ？

The high-pressure cleaning vehicle uses the pressure generated by high-pressure water flow to flush open the blocked pipeline.

 The main components include the tank body, high-pressure pump, hydraulic system, etc. High pressure cleaning vehicles are mainly 

used to clean sediment in urban sewers and pipelines, as well as to clear dead corners and mud ditches. They can also be used to clean 

industrial drainage pipes, walls, etc., and to clean roads and square floors.

The road cleaning situation should be identified as poor and targeted treatment should be carried out. For example, for the problem

 of road waste truck spillage, a high-pressure flushing vehicle should be used to flush the spilled material to the roadside ditch, 

and then the roadside ditch should be cleaned and swept; For high-pressure washing vehicles on the road, achieve deep cleaning

 to ensure timely cleaning of road leaks.

High pressure water gun cleaning is the process of using a high pressure water gun to wash away the mud and sand that has been

 contaminated on the surface of the vehicle from top to bottom, and then rinse the rear and lower parts of the vehicle. In this step, 

it is important to flush the chassis and thoroughly clean the edges, bends, mudguards, and other areas. Especially, the wheels, 

brake discs, fenders, front grille, door frames, and skirts should be thoroughly cleaned of mud and dirt.

The high-pressure cleaning car has a compact body and good passability. The cleaning effect is excellent, and it is usually favored by units 

in property communities, universities and other parks that require high-pressure cleaning. This vehicle is economical, environmentally friendly, 

and meets daily operational needs. Equipped with a handheld high-pressure water gun, it can perform high-pressure cleaning on dead corners,

 wall corners, small corridors, flower beds, corridors, pavilions and other places that vehicles cannot reach in the community and university. 

It can clean the outer and inner surfaces of the garbage bins in the community.