MAX13487

最新推荐文章于 2024-07-22 15:13:30 发布

LostSpeed

最新推荐文章于 2024-07-22 15:13:30 发布

阅读量1.7w

点赞数 11

分类专栏：电路整理

本文链接：https://blog.csdn.net/LostSpeed/article/details/95676624

版权

电路整理专栏收录该内容

9 篇文章 5 订阅

订阅专栏

前言

在产品底板上用排针插了一块ttl_to_485_232的小扩展板，显得很突兀, 没有完整的料单:)
生产的同事不知道该焊怎样的料单使扩展板正常工作.
原作者跑了，只能自己解决料单的问题。

技术资料管理真要跟上，谁跑了都不怕。
研发也是，自己干了活，要交完整，这是本分，也是素质。

根据PCB的网络表, 用AD19反了一张原理图和料单.
同事按照料单焊好扩展板，好使了。从串口转到485后，接上传感器，用原来的下位机实现，可以采集到传感器返回的值。

实验

将其中一路ttl_to_485的典型电路，整理出来，容易看一些，备用。
在这里插入图片描述

T2021_0220_1754

收发控制的2，3脚上拉了。芯片必须是MAX13487才行。因为MAX13487是自动收发控制的。

如果换成了MAX3485ESA就不行了。
MAX3485ESA需要用MCU来控制2，3脚，低电平是数据流入MCU（接收）; 高电平时，数据流出MCU(发送).

MAX13487的官方说明

The MAX13487E/MAX13488E +5V, half-duplex, ±15kV
ESD-protected RS-485/RS-422-compatible transceivers
feature one driver and one receiver. The MAX13487E/
MAX13488E include a hot-swap capability to eliminate
false transitions on the bus during power-up or live
insertion.
The MAX13487E/MAX13488E feature Maxim’s proprietary AutoDirection control. This architecture makes the
devices ideal for applications, such as isolated RS-485
ports, where the driver input is used in conjunction with
the driver-enable signal to drive the differential bus.
The MAX13487E features reduced slew-rate drivers
that minimize EMI and reduce reflections caused by
improperly terminated cables, allowing error-free transmission up to 500kbps. The MAX13488E driver slew
rate is not limited, allowing transmit speeds up to
16Mbps.
The MAX13487E/MAX13488E feature a 1/4-unit load
receiver input impedance, allowing up to 128 transceivers on the bus. These devices are intended for halfduplex communications. All driver outputs are
protected to ±15kV ESD using the Human Body Model.
The MAX13487E/MAX13488E are available in an 8-pin
SO package. The devices operate over the extended
-40°C to +85°C temperature range.

PIN	NAME	FUNCTION
1	RO	Receiver Output. When receiver is enabled and V(A) - V(B) > +200mV, RO is high. If V(A) - V(B) < -200mV, RO is low.
2	/RE	Receiver Output Enable. Drive RE low to enable the RO. Drive RE high to let the AutoDirection circuit control the receiver. RE is a hot-swap input (see the Hot-Swap Capability section for more details).
3	/SHDN	Shutdown. Drive SHDN high to let the device operate in normal operation. Drive SHDN low to put the part in shutdown.
4	DI	Driver Input. Drive DI low to force noninverting output low and inverting output high. Drive DI high to force noninverting output high and inverting output low. DI is an input to the internal state machine that automatically enables and disables the driver. See the Function Tables and General Description for more information. DI is a hot-swap input (see the Hot-Swap Capability section for more details)
5	GND	Ground
6	A	Noninverting Receiver Input and Noninverting Driver Output
7	B	Inverting Receiver Input and Inverting Driver Output
8	VCC	Positive Supply, VCC = +5V ±5%. Bypass VCC to GND with a 0.1µF capacitor