STM32F103系列之OLED显示

最新推荐文章于 2023-11-24 23:24:20 发布

半学习

最新推荐文章于 2023-11-24 23:24:20 发布

阅读量1.6k

点赞数 3

分类专栏： STM32 文章标签： stm32 单片机嵌入式硬件 Powered by 金山文档

本文链接：https://blog.csdn.net/bshysy1314/article/details/128497903

版权

STM32 专栏收录该内容

4 篇文章 3 订阅

订阅专栏

OLED的产品分为4引脚的IIC接口的和7引脚SPI接口的，本篇主要讲解4引脚的OLED。

OLED显示其实说白了就是对于像素点的点亮和熄灭进行操作，对于OLED操作的好处是我们能够通过OLED来显示我们代码当中的变量，这样我们就可以不用串口调试的方法来知道变量的值了，这样比较方便。

对于OLED的代码，我们只需要能够调用就可以了，毕竟C/V走天下嘛。

下面是OLED的大致面板：

下面是OLED.C文件的代码：

#include "stm32f10x.h"
#include "OLED_Font.h"

/*引脚配置*/
#define OLED_W_SCL(x)        GPIO_WriteBit(GPIOB, GPIO_Pin_8, (BitAction)(x))
#define OLED_W_SDA(x)        GPIO_WriteBit(GPIOB, GPIO_Pin_9, (BitAction)(x))

/*引脚初始化*/
void OLED_I2C_Init(void)
{
    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
    
    GPIO_InitTypeDef GPIO_InitStructure;
     GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_OD;
    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_8;
     GPIO_Init(GPIOB, &GPIO_InitStructure);
    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
     GPIO_Init(GPIOB, &GPIO_InitStructure);
    
    OLED_W_SCL(1);
    OLED_W_SDA(1);
}

/**
  * @brief  I2C开始
  * @param  无
  * @retval 无
  */
void OLED_I2C_Start(void)
{
    OLED_W_SDA(1);
    OLED_W_SCL(1);
    OLED_W_SDA(0);
    OLED_W_SCL(0);
}

/**
  * @brief  I2C停止
  * @param  无
  * @retval 无
  */
void OLED_I2C_Stop(void)
{
    OLED_W_SDA(0);
    OLED_W_SCL(1);
    OLED_W_SDA(1);
}

/**
  * @brief  I2C发送一个字节
  * @param  Byte 要发送的一个字节
  * @retval 无
  */
void OLED_I2C_SendByte(uint8_t Byte)
{
    uint8_t i;
    for (i = 0; i < 8; i++)
    {
        OLED_W_SDA(Byte & (0x80 >> i));
        OLED_W_SCL(1);
        OLED_W_SCL(0);
    }
    OLED_W_SCL(1);    //额外的一个时钟，不处理应答信号
    OLED_W_SCL(0);
}

/**
  * @brief  OLED写命令
  * @param  Command 要写入的命令
  * @retval 无
  */
void OLED_WriteCommand(uint8_t Command)
{
    OLED_I2C_Start();
    OLED_I2C_SendByte(0x78);        //从机地址
    OLED_I2C_SendByte(0x00);        //写命令
    OLED_I2C_SendByte(Command); 
    OLED_I2C_Stop();
}

/**
  * @brief  OLED写数据
  * @param  Data 要写入的数据
  * @retval 无
  */
void OLED_WriteData(uint8_t Data)
{
    OLED_I2C_Start();
    OLED_I2C_SendByte(0x78);        //从机地址
    OLED_I2C_SendByte(0x40);        //写数据
    OLED_I2C_SendByte(Data);
    OLED_I2C_Stop();
}

/**
  * @brief  OLED设置光标位置
  * @param  Y 以左上角为原点，向下方向的坐标，范围：0~7
  * @param  X 以左上角为原点，向右方向的坐标，范围：0~127
  * @retval 无
  */
void OLED_SetCursor(uint8_t Y, uint8_t X)
{
    OLED_WriteCommand(0xB0 | Y);                    //设置Y位置
    OLED_WriteCommand(0x10 | ((X & 0xF0) >> 4));    //设置X位置高4位
    OLED_WriteCommand(0x00 | (X & 0x0F));            //设置X位置低4位
}

/**
  * @brief  OLED清屏
  * @param  无
  * @retval 无
  */
void OLED_Clear(void)
{  
    uint8_t i, j;
    for (j = 0; j < 8; j++)
    {
        OLED_SetCursor(j, 0);
        for(i = 0; i < 128; i++)
        {
            OLED_WriteData(0x00);
        }
    }
}

/**
  * @brief  OLED显示一个字符
  * @param  Line 行位置，范围：1~4
  * @param  Column 列位置，范围：1~16
  * @param  Char 要显示的一个字符，范围：ASCII可见字符
  * @retval 无
  */
void OLED_ShowChar(uint8_t Line, uint8_t Column, char Char)
{          
    uint8_t i;
    OLED_SetCursor((Line - 1) * 2, (Column - 1) * 8);        //设置光标位置在上半部分
    for (i = 0; i < 8; i++)
    {
        OLED_WriteData(OLED_F8x16[Char - ' '][i]);            //显示上半部分内容
    }
    OLED_SetCursor((Line - 1) * 2 + 1, (Column - 1) * 8);    //设置光标位置在下半部分
    for (i = 0; i < 8; i++)
    {
        OLED_WriteData(OLED_F8x16[Char - ' '][i + 8]);        //显示下半部分内容
    }
}

/**
  * @brief  OLED显示字符串
  * @param  Line 起始行位置，范围：1~4
  * @param  Column 起始列位置，范围：1~16
  * @param  String 要显示的字符串，范围：ASCII可见字符
  * @retval 无
  */
void OLED_ShowString(uint8_t Line, uint8_t Column, char *String)
{
    uint8_t i;
    for (i = 0; String[i] != '\0'; i++)
    {
        OLED_ShowChar(Line, Column + i, String[i]);
    }
}

/**
  * @brief  OLED次方函数
  * @retval 返回值等于X的Y次方
  */
uint32_t OLED_Pow(uint32_t X, uint32_t Y)
{
    uint32_t Result = 1;
    while (Y--)
    {
        Result *= X;
    }
    return Result;
}

/**
  * @brief  OLED显示数字（十进制，正数）
  * @param  Line 起始行位置，范围：1~4
  * @param  Column 起始列位置，范围：1~16
  * @param  Number 要显示的数字，范围：0~4294967295
  * @param  Length 要显示数字的长度，范围：1~10
  * @retval 无
  */
void OLED_ShowNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
    uint8_t i;
    for (i = 0; i < Length; i++)                            
    {
        OLED_ShowChar(Line, Column + i, Number / OLED_Pow(10, Length - i - 1) % 10 + '0');
    }
}

/**
  * @brief  OLED显示数字（十进制，带符号数）
  * @param  Line 起始行位置，范围：1~4
  * @param  Column 起始列位置，范围：1~16
  * @param  Number 要显示的数字，范围：-2147483648~2147483647
  * @param  Length 要显示数字的长度，范围：1~10
  * @retval 无
  */
void OLED_ShowSignedNum(uint8_t Line, uint8_t Column, int32_t Number, uint8_t Length)
{
    uint8_t i;
    uint32_t Number1;
    if (Number >= 0)
    {
        OLED_ShowChar(Line, Column, '+');
        Number1 = Number;
    }
    else
    {
        OLED_ShowChar(Line, Column, '-');
        Number1 = -Number;
    }
    for (i = 0; i < Length; i++)                            
    {
        OLED_ShowChar(Line, Column + i + 1, Number1 / OLED_Pow(10, Length - i - 1) % 10 + '0');
    }
}

/**
  * @brief  OLED显示数字（十六进制，正数）
  * @param  Line 起始行位置，范围：1~4
  * @param  Column 起始列位置，范围：1~16
  * @param  Number 要显示的数字，范围：0~0xFFFFFFFF
  * @param  Length 要显示数字的长度，范围：1~8
  * @retval 无
  */
void OLED_ShowHexNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
    uint8_t i, SingleNumber;
    for (i = 0; i < Length; i++)                            
    {
        SingleNumber = Number / OLED_Pow(16, Length - i - 1) % 16;
        if (SingleNumber < 10)
        {
            OLED_ShowChar(Line, Column + i, SingleNumber + '0');
        }
        else
        {
            OLED_ShowChar(Line, Column + i, SingleNumber - 10 + 'A');
        }
    }
}

/**
  * @brief  OLED显示数字（二进制，正数）
  * @param  Line 起始行位置，范围：1~4
  * @param  Column 起始列位置，范围：1~16
  * @param  Number 要显示的数字，范围：0~1111 1111 1111 1111
  * @param  Length 要显示数字的长度，范围：1~16
  * @retval 无
  */
void OLED_ShowBinNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length)
{
    uint8_t i;
    for (i = 0; i < Length; i++)                            
    {
        OLED_ShowChar(Line, Column + i, Number / OLED_Pow(2, Length - i - 1) % 2 + '0');
    }
}

/**
  * @brief  OLED初始化
  * @param  无
  * @retval 无
  */
void OLED_Init(void)
{
    uint32_t i, j;
    
    for (i = 0; i < 1000; i++)            //上电延时
    {
        for (j = 0; j < 1000; j++);
    }
    
    OLED_I2C_Init();            //端口初始化
    
    OLED_WriteCommand(0xAE);    //关闭显示
    
    OLED_WriteCommand(0xD5);    //设置显示时钟分频比/振荡器频率
    OLED_WriteCommand(0x80);
    
    OLED_WriteCommand(0xA8);    //设置多路复用率
    OLED_WriteCommand(0x3F);
    
    OLED_WriteCommand(0xD3);    //设置显示偏移
    OLED_WriteCommand(0x00);
    
    OLED_WriteCommand(0x40);    //设置显示开始行
    
    OLED_WriteCommand(0xA1);    //设置左右方向，0xA1正常 0xA0左右反置
    
    OLED_WriteCommand(0xC8);    //设置上下方向，0xC8正常 0xC0上下反置

    OLED_WriteCommand(0xDA);    //设置COM引脚硬件配置
    OLED_WriteCommand(0x12);
    
    OLED_WriteCommand(0x81);    //设置对比度控制
    OLED_WriteCommand(0xCF);

    OLED_WriteCommand(0xD9);    //设置预充电周期
    OLED_WriteCommand(0xF1);

    OLED_WriteCommand(0xDB);    //设置VCOMH取消选择级别
    OLED_WriteCommand(0x30);

    OLED_WriteCommand(0xA4);    //设置整个显示打开/关闭

    OLED_WriteCommand(0xA6);    //设置正常/倒转显示

    OLED_WriteCommand(0x8D);    //设置充电泵
    OLED_WriteCommand(0x14);

    OLED_WriteCommand(0xAF);    //开启显示
        
    OLED_Clear();                //OLED清屏
}

下面是OLED.H文件的代码：

#ifndef __OLED_H
#define __OLED_H

void OLED_Init(void);
void OLED_Clear(void);
void OLED_ShowChar(uint8_t Line, uint8_t Column, char Char);
void OLED_ShowString(uint8_t Line, uint8_t Column, char *String);
void OLED_ShowNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);
void OLED_ShowSignedNum(uint8_t Line, uint8_t Column, int32_t Number, uint8_t Length);
void OLED_ShowHexNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);
void OLED_ShowBinNum(uint8_t Line, uint8_t Column, uint32_t Number, uint8_t Length);

#endif

下面是OLED_FONT.H文件的代码：

#ifndef __OLED_FONT_H
#define __OLED_FONT_H

/*OLED字模库，宽8像素，高16像素*/
const uint8_t OLED_F8x16[][16]=
{
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//  0
    
    0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
    
    0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
    
    0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,
    0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
    
    0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,
    0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
    
    0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,
    0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
    
    0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,
    0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
    
    0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
    
    0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,
    0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
    
    0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,
    0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
    
    0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,
    0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
    
    0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,
    0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
    
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
    
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
    
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
    
    0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,
    0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
    
    0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
    0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
    
    0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,
    0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
    
    0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,
    0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
    
    0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,
    0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
    
    0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,
    0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
    
    0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,
    0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
    
    0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,
    0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
    
    0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,
    0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
    
    0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,
    0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
    
    0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,
    0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
    
    0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,
    0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
    
    0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,
    0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
    
    0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,
    0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
    
    0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
    0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
    
    0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
    0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
    
    0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,
    0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
    
    0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,
    0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
    
    0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,
    0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
    
    0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,
    0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
    
    0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,
    0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
    
    0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,
    0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
    
    0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
    0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
    
    0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,
    0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
    
    0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,
    0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
    
    0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
    0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
    
    0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,
    0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
    
    0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,
    0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
    
    0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,
    0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
    
    0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,
    0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
    
    0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,
    0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
    
    0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,
    0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
    
    0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
    0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
    
    0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,
    0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
    
    0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,
    0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
    
    0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,
    0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
    
    0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,
    0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
    
    0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,
    0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
    
    0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,
    0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
    
    0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,
    0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
    
    0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,
    0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
    
    0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,
    0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
    
    0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,
    0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
    
    0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,
    0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
    
    0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,
    0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
    
    0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
    
    0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
    0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
    
    0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
    
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
    0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
    
    0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
    
    0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
    0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
    
    0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,
    0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
    
    0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,
    0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
    
    0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,
    0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
    
    0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
    0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
    
    0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,
    0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
    
    0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
    0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
    
    0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,
    0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
    
    0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,
    0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
    
    0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,
    0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
    
    0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,
    0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
    
    0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,
    0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
    
    0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
    0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
    
    0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,
    0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
    
    0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,
    0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
    
    0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,
    0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
    
    0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,
    0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
    
    0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
    0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
    
    0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,
    0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
    
    0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,
    0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
    
    0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,
    0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
    
    0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
    0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
    
    0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,
    0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
    
    0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,
    0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
    
    0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,
    0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
    
    0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,
    0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
    
    0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,
    0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
    
    0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,
    0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
    
    0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,
    0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
    
    0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,
    0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};

#endif

下面是main.c文件：

#include "stm32f10x.h"                  // Device header
#include "Delay.h"
#include "OLED.h"

int main(void)
{
    OLED_Init();
    
    OLED_ShowChar(1, 1, 'A');
    OLED_ShowString(1, 3, "HelloWorld!");
    OLED_ShowNum(2, 1, 12345, 5);
    OLED_ShowSignedNum(2, 7, -66, 2);
    OLED_ShowHexNum(3, 1, 0xAA55, 4);
    OLED_ShowBinNum(4, 1, 0xAA55, 16);
    
    while (1)
    {
        
    }
}