早先设计28335的板子,有EMU0 EMU1两线和DSP上两个引脚对应。
这次做28069的原理图时,看到没有这两个对应引脚,网上查了一下EMU0 EMU1似乎也没什么用途,于是就把2条线省去。
板子焊出来后,发现JTAG连不上芯片。报错如下:
/*********************************************************************分割线****************************************************************************/
[Start: Texas Instruments XDS100v3 USB Emulator_0]
Execute the command:
%ccs_base%/common/uscif/dbgjtag -f %boarddatafile% -rv -o -F inform,logfile=yes -S pathlength -S integrity
[Result]
-----[Print the board config pathname(s)]------------------------------------
C:\Users\ADMINI~1\AppData\Local\TEXASI~1\
CCS\CCS\0\0\BrdDat\testBoard.dat
-----[Print the reset-command software log-file]-----------------------------
This utility has selected a 100- or 510-class product.