#STM32F407VET6（天空星）标准库和HAL驱动ILI9341

GrassFishStudio

已于 2024-04-21 16:22:00 修改

阅读量2.3k

点赞数 53

分类专栏： STM32F407VET6天空星文章标签： stm32 嵌入式硬件单片机

于 2024-04-21 15:09:38 首次发布

本文链接：https://blog.csdn.net/byhyf83862547/article/details/138033125

版权

STM32F407VET6天空星专栏收录该内容

10 篇文章 0 订阅

订阅专栏

一、驱动方式：软件SPI，屏幕像素320*240

二、标准库含触摸，HAL库不含触摸

三、立创参考的文档

【立创·天空星ST32F407VET6】模块移植手册 - 飞书云文档 (feishu.cn)https://lceda001.feishu.cn/wiki/MFNpw4STVi5ImikkcH1clWrlnqb

四、引脚分配

软件SDO（MISO）不用接，注意SDI和SDO的S是slave而不是master，不要接反线,ili9341屏幕是slave，天空星开发板是master，所以SDI接的是MOSI。

五、HAL库工程（没有移植触摸）

1.选择外部时钟源

2.选择SW

3.配置时钟框图，HSE选择8MHz，天空星时钟为8MHz

4.配置引脚，上述所有的引脚按这样配置：上拉，高速，初始高电平，推挽输出

5.选择只生成必要文件

6.添加以下文件

F407VET6天空星/ILI9341HAL库移植所需要的文件 · lovefoolnotme/单片机 - 码云 - 开源中国 (gitee.com)https://gitee.com/lovefoolnotme/singlechip/tree/master/F407VET6%E5%A4%A9%E7%A9%BA%E6%98%9F/ILI9341HAL%E5%BA%93%E7%A7%BB%E6%A4%8D%E6%89%80%E9%9C%80%E8%A6%81%E7%9A%84%E6%96%87%E4%BB%B6移植这些文件只需要修改对应的引脚即可使用，touch不需要移植（没有完成移植修改）

7.测试移植

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "lcd.h"
#include "gui.h"
#include "test.h"
/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */

/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */

/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{

  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  /* USER CODE BEGIN 2 */
	  LCD_Init();	   //液晶屏初始化

  /* USER CODE END 2 */

  /* Infinite loop */
  /* USER CODE BEGIN WHILE */
  while (1)
  {
		main_test(); 		//测试主界面
		Test_Color();  		//简单刷屏填充测试
		Test_FillRec();		//GUI矩形绘图测试
		Test_Circle(); 		//GUI画圆测试
		Test_Triangle();    //GUI三角形绘图测试
		English_Font_test();//英文字体示例测试
		Chinese_Font_test();//中文字体示例测试
		Pic_test();			//图片显示示例测试
		Rotate_Test();   //旋转显示测试
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */
   
  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};

  /** Configure the main internal regulator output voltage
  */
  __HAL_RCC_PWR_CLK_ENABLE();
  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLM = 4;
  RCC_OscInitStruct.PLL.PLLN = 72;
  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
  RCC_OscInitStruct.PLL.PLLQ = 4;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
}

/* USER CODE BEGIN 4 */

/* USER CODE END 4 */

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */