（四）u-boot启动流程分析（C语言部分board_r.c）

C语言部分主要集中在两个函数board_init_f和board_init_r，主要是board初始化的前部分（front）及后部分（rear），上一节我们分析了board_init_f函数的实现，这一节我们来看看board_r.c：

common/board_r.c

void board_init_r(gd_t *new_gd, ulong dest_addr)
{
......
    for (i = 0; i < ARRAY_SIZE(init_sequence_r); i++)
        init_sequence_r[i] += gd->reloc_off;
......
}

同样，board_init_r的实现也很简单，主要是执行init_sequence_r里面定义的初始化

init_fnc_t init_sequence_r[] = {
	initr_trace,
	initr_reloc,
	/* TODO: could x86/PPC have this also perhaps? */
#ifdef CONFIG_ARM
	initr_caches,
#endif
	initr_reloc_global_data,
#if defined(CONFIG_SYS_INIT_RAM_LOCK) && defined(CONFIG_E500)
	initr_unlock_ram_in_cache,
#endif
	initr_barrier,
	initr_malloc,
	console_init_m,
#ifdef CONFIG_SYS_NONCACHED_MEMORY
	initr_noncached,
#endif
	bootstage_relocate,
#ifdef CONFIG_DM
	initr_dm,
#endif
#ifdef CONFIG_ARM
	board_init,	/* Setup chipselects */
#endif
	/*
	 * TODO: printing of the clock inforamtion of the board is now
	 * implemented as part of bdinfo command. Currently only support for
	 * davinci SOC's is added. Remove this check once all the board
	 * implement this.
	 */
#ifdef CONFIG_CLOCKS
	set_cpu_clk_info, /* Setup clock information */
#endif
	stdio_init_tables,
	initr_serial,
	initr_announce,
	INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_PPC
	initr_trap,
#endif
#ifdef CONFIG_ADDR_MAP
	initr_addr_map,
#endif
#if defined(CONFIG_BOARD_EARLY_INIT_R)
	board_early_init_r,
#endif
	INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_LOGBUFFER
	initr_logbuffer,
#endif
#ifdef CONFIG_POST
	initr_post_backlog,
#endif
	INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_SYS_DELAYED_ICACHE
	initr_icache_enable,
#endif
#if defined(CONFIG_PCI) && defined(CONFIG_SYS_EARLY_PCI_INIT)
	/*
	 * Do early PCI configuration _before_ the flash gets initialised,
	 * because PCU ressources are crucial for flash access on some boards.
	 */
	initr_pci,
#endif
#ifdef CONFIG_WINBOND_83C553
	initr_w83c553f,
#endif
#ifdef CONFIG_ARCH_EARLY_INIT_R
	arch_early_init_r,
#endif
	power_init_board,
#ifndef CONFIG_SYS_NO_FLASH
	initr_flash,
#endif
	INIT_FUNC_WATCHDOG_RESET
#if defined(CONFIG_PPC)
	/* initialize higher level parts of CPU like time base and timers */
	cpu_init_r,
#endif
#ifdef CONFIG_PPC
	initr_spi,
#endif
#if defined(CONFIG_X86) && defined(CONFIG_SPI)
	init_func_spi,
#endif
#ifdef CONFIG_CMD_NAND
	initr_nand,
#endif
#ifdef CONFIG_CMD_ONENAND
	initr_onenand,
#endif
#ifdef CONFIG_GENERIC_MMC
	initr_mmc,
#endif
#ifdef CONFIG_HAS_DATAFLASH
	initr_dataflash,
#endif
	initr_env,
	INIT_FUNC_WATCHDOG_RESET
	initr_secondary_cpu,
#ifdef CONFIG_SC3
	initr_sc3_read_eeprom,
#endif
#if defined(CONFIG_ID_EEPROM) || defined(CONFIG_SYS_I2C_MAC_OFFSET)
	mac_read_from_eeprom,
#endif
	INIT_FUNC_WATCHDOG_RESET
#if defined(CONFIG_PCI) && !defined(CONFIG_SYS_EARLY_PCI_INIT)
	/*
	 * Do pci configuration
	 */
	initr_pci,
#endif
	stdio_add_devices,
	initr_jumptable,
#ifdef CONFIG_API
	initr_api,
#endif
	console_init_r,		/* fully init console as a device */
#ifdef CONFIG_DISPLAY_BOARDINFO_LATE
	show_model_r,
#endif
#ifdef CONFIG_ARCH_MISC_INIT
	arch_misc_init,		/* miscellaneous arch-dependent init */
#endif
#ifdef CONFIG_MISC_INIT_R
	misc_init_r,		/* miscellaneous platform-dependent init */
#endif
	INIT_FUNC_WATCHDOG_RESET
#ifdef CONFIG_CMD_KGDB
	initr_kgdb,
#endif
	interrupt_init,
#if defined(CONFIG_ARM)
	initr_enable_interrupts,
#endif
#ifdef CONFIG_X86
	timer_init,		/* initialize timer */
#endif
#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
	initr_status_led,
#endif
	/* PPC has a udelay(20) here dating from 2002. Why? */
#ifdef CONFIG_CMD_NET
	initr_ethaddr,
#endif
#ifdef CONFIG_BOARD_LATE_INIT
	board_late_init,
#endif
#ifdef CONFIG_CMD_SCSI
	INIT_FUNC_WATCHDOG_RESET
	initr_scsi,
#endif
#ifdef CONFIG_CMD_DOC
	INIT_FUNC_WATCHDOG_RESET
	initr_doc,
#endif
#ifdef CONFIG_BITBANGMII
	initr_bbmii,
#endif
#ifdef CONFIG_CMD_NET
	INIT_FUNC_WATCHDOG_RESET
	initr_net,
#endif
#ifdef CONFIG_POST
	initr_post,
#endif
#if defined(CONFIG_CMD_PCMCIA) && !defined(CONFIG_CMD_IDE)
	initr_pcmcia,
#endif
#if defined(CONFIG_CMD_IDE)
	initr_ide,
#endif
#ifdef CONFIG_LAST_STAGE_INIT
	INIT_FUNC_WATCHDOG_RESET
	/*
	 * Some parts can be only initialized if all others (like
	 * Interrupts) are up and running (i.e. the PC-style ISA
	 * keyboard).
	 */
	last_stage_init,
#endif
#ifdef CONFIG_CMD_BEDBUG
	INIT_FUNC_WATCHDOG_RESET
	initr_bedbug,
#endif
#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER)
	initr_mem,
#endif
#ifdef CONFIG_PS2KBD
	initr_kbd,
#endif
	run_main_loop,
};