黑莓 pin 锁定_如何使用PIN码锁定Ecobee温控器

黑莓 pin 锁定

If you have kids in the house and are strict about the thermostat, you can lock down your Ecobee with a PIN code so that no one can adjust the temperature except those authorized to do so.

如果您家中有小孩并且对调温器有严格要求，则可以使用PIN码锁定Ecobee，以便除授权人员外，其他任何人都无法调节温度。

With a non-smart thermostat, you’d usually have to get a locked enclosure to put around it, like you see in most businesses. But with smart thermostats like the Ecobee, you can simply put a passcode lock on it just like you would with your smartphone.

使用非智能恒温器时，通常必须像在大多数企业中看到的那样，将其锁定后才能放在其周围。 但是，使用像Ecobee这样的智能恒温器，就像在智能手机上一样，只需在其上设置密码锁即可。

Unfortunately, you can only set this up from the thermostat itself and not from the Ecobee app on your phone (like the Nest allows you to do), but it’s easy to do and doesn’t take a lot of time at all.

不幸的是，您只能通过恒温器本身进行设置，而不能通过手机上的Ecobee应用程序进行设置(就像Nest允许您执行操作一样 )，但这很容易做到，并且根本不需要花费很多时间。

Start by tapping on the menu button in the bottom-left corner of the screen on the Ecobee thermostat.

首先点击Ecobee温控器屏幕左下角的菜单按钮。

Scroll down and tap on “Settings”.

向下滚动并点击“设置”。

Select “Access Control”.

选择“访问控制”。

Tap on “Enable Security Code”.

点击“启用安全代码”。

Enter in a four-digit passcode that you want to use with the thermostat in order to unlock it.

输入要与恒温器一起使用的四位数密码，以对其进行解锁。

Once you enter that in, tap “Save” in the bottom-right corner of the screen.

输入后，点击屏幕右下角的“保存”。

Next, select all of the features that will require a passcode in order to change them. You can simply tap on “All” in order to lock down the thermostat entirely.

接下来，选择所有需要密码才能更改的功能。 您只需点击“全部”即可完全锁定恒温器。

After you’re done with that, tap on the back arrow in the top-left corner to go back to the main screen.

完成此操作后，请点击左上角的向后箭头以返回主屏幕。

At this point, the passcode will be enabled, but you’ll have to wait for the thermostat to go into standby mode before it will begin activating. You’ll know when it’s in standby mode when all that shows on the screen is the indoor temperature and a smaller icon below that denoting the outdoor temperature.

此时，密码将被启用，但是您必须等待恒温器进入待机模式，然后才能开始激活。 当屏幕上显示的只是室内温度，而在其下的较小图标表示室外温度时，您将知道它处于待机模式。

Now, whenever someone tries to change settings or adjust the indoor temperature, they will be met with a screen where they will need to enter in the passcode before they can change anything.

现在，每当有人尝试更改设置或调节室内温度时，他们都会看到一个屏幕，需要他们输入密码才能更改任何内容。

翻译自: https://www.howtogeek.com/258645/how-to-lock-your-ecobee3-thermostat-with-a-pin-code/

黑莓 pin 锁定