airpods配对_如何将AirPods与PC，Mac，Android手机或其他设备配对

airpods配对

Apple’s AirPods “just work” with iPhones thanks to their W1 chip, but they’re also standard Bluetooth headphones. That means they work with any device that supports Bluetooth audio—even Android phones.

得益于W1芯片，Apple的AirPods可以与iPhone配合使用，但它们也是标准的蓝牙耳机。 这意味着它们可以与任何支持蓝牙音频的设备一起使用，甚至包括Android手机。

The pairing process won’t be as effortless as pairing with an iPhone, and the connection may not be quite as solid, but they’ll work with anything from an Android phone or Windows PC to other Apple devices like an Apple TV. There’s also an easy pairing process if you’re using a Mac or iPad.

配对过程不会像与iPhone配对那样轻松，并且连接可能不够牢固，但是它们可以与从Android手机或Windows PC到其他Apple设备(例如Apple TV)的任何设备一起使用。 如果您使用的是Mac或iPad，配对过程也很简单。

如何将AirPods与Mac或iPad配对 (How to Pair Your AirPods With a Mac or iPad)

If you’ve already paired your AirPods with your iPhone, this pairing status will sync between your iPhone and any iPads and Macs you have on your account thanks to iCloud. For this to work, you have to be signed into the iPad or Mac with the same Apple ID you use on your iPhone. For Macs, you must have Handoff enabled.

如果您已经将AirPods与iPhone配对，则由于iCloud，这种配对状态将在您的iPhone与您帐户中拥有的所有iPad和Mac之间同步。 为此，您必须使用在iPhone上使用的相同Apple ID登录到iPad或Mac。 对于Mac，必须启用“切换”功能。

Older Macs that don’t support Handoff can’t take advantage of this easy pairing process, and you’ll have to manually pair it with them using Bluetooth. This pairing status also doesn’t sync to Apple TVs, so you’ll have to use Bluetooth to pair AirPods with an Apple TV, too.

不支持Handoff的旧Mac无法利用这种简单的配对过程，因此您必须使用蓝牙将其与它们手动配对。 此配对状态也不会同步到Apple TV，因此，您还必须使用蓝牙将AirPods与Apple TV配对。

If everything is set up properly, you can simply select your AirPods like any other audio device from your iPad or Mac. First, ensure either your AirPods case is open, the AirPods are out of the case, or that they’re in your ears. If they’re in the case and the case is closed, they won’t be available as an audio device option.

如果一切设置正确，则可以像从iPad或Mac上选择任何其他音频设备一样简单地选择AirPods。 首先，请确保您的AirPods机壳已打开，AirPods不在机壳中或在您的耳朵中。 如果放在箱子中并且箱子是关闭的，则它们将不会作为音频设备选件使用。

On an iPad, open the Control Center, tap the audio wave icon at the top right corner of the music controls or long-press the music controls and tap the device switcher icon, and select your AirPods in the list of audio devices.

在iPad上，打开控制中心，点击音乐控件右上角的音频波图标，或长按音乐控件，然后点击设备切换器图标，然后在音频设备列表中选择AirPods。

On a Mac, click the volume icon on your Mac’s menu bar and select your AirPods in the list of available devices or head to Apple menu > System Preferences > Sound and choose the AirPods. You can also enable the volume icon on your Mac’s menu bar from here by checking the “Show volume in menu bar” box, if it isn’t already enabled.

在Mac上，单击Mac菜单栏上的音量图标，然后在可用设备列表中选择AirPods，或转到Apple菜单>“系统偏好设置”>“声音”，然后选择AirPods。 如果尚未启用，也可以从Mac的菜单栏上选中“在菜单栏中显示音量”框来启用音量图标。

如何将AirPods与Android手机，Windows PC，Apple TV或其他任何设备配对 (How to Pair Your AirPods With an Android Phone, Windows PC, Apple TV, or Anything Else)

To pair your AirPods with any other device—or an older Mac, if you don’t meet the above requirements—you’ll just need to find the easy-to-miss pairing button on the AirPods charging case.

要将AirPods与任何其他设备(或较旧的Mac，如果不满足上述要求)配对，您只需在AirPods充电盒上找到易于丢失的配对按钮即可。

Look on the back of your AirPods case. See that faint silver circle near the bottom, just above the Lightning port? That’s the “setup button” you need to pair your AirPods with other devices where the W1 chip can’t pair it automatically.

看一下AirPods保护套的背面。 看到闪电端口上方底部附近的银色圆圈吗？ 这是您需要将AirPods与W1芯片无法自动配对的其他设备配对的“设置按钮”。

To place your AirPods in pairing mode, here’s what you need to do:

要将AirPods置于配对模式，这是您需要做的：

1. Place both your AirPods in the charging case.
   将两个AirPods都放在充电盒中。
2. Open the lid on the case. You’ll see the light come on, indicating the charging status.
   打开盒盖。 您会看到指示灯亮起，指示充电状态。
3. Press and hold the circular button on the back of your AirPods case. The light inside the case will begin to blink white. This indicates that your AirPods are in pairing mode.
   按住AirPods盒背面的圆形按钮。 机箱内的指示灯将开始闪烁白色。 这表明您的AirPods处于配对模式。

While the white light is flashing, your AirPods will be “discoverable”. In other words, they’ll appear as a peripheral you can pair from your Bluetooth settings, just like any other Bluetooth headphones or speakers. For example:

当白色指示灯闪烁时，您的AirPods将是“可发现的”。 换句话说，它们将作为您可以从蓝牙设置中配对的外围设备出现，就像其他任何蓝牙耳机或扬声器一样。 例如：

• Android: Go to Settings and tap the “Bluetooth” option under Wireless & networks. Ensure Bluetooth is enabled and you’ll see the AirPods as an available device here.

  Android ：转到“设置”，然后点击“无线和网络”下的“蓝牙”选项。 确保启用了蓝牙，您将在此处看到AirPods作为可用设备。

• Windows 10: Head to Settings > Devices > Bluetooth & other devices > Add Bluetooth or other device > Bluetooth. Select your AirPods in the list of nearby devices.

  Windows 10 ：前往设置>设备>蓝牙和其他设备>添加蓝牙或其他设备>蓝牙。 在附近的设备列表中选择您的AirPods。

• Windows 7: Head to Control Panel > Hardware and Sound > Devices and Printers > Add a device. Choose your AirPods.

  Windows 7 ：转到控制面板>硬件和声音>设备和打印机>添加设备。 选择您的AirPods。

• Mac: Click the Apple menu and head to System Preferences > Bluetooth. Select your AirPods in the list and click “Pair”.

  Mac ：单击Apple菜单，然后转到系统偏好设置>蓝牙。 在列表中选择您的AirPods，然后单击“配对”。

• Apple TV: Navigate to Settings > Remotes and Devices > Bluetooth. Pick your AirPods in the list.

  Apple TV ：导航到“设置”>“遥控器和设备”>“蓝牙”。 在列表中选择您的AirPods。

• Other Devices With Bluetooth: Just navigate to the Bluetooth settings screen where you can view and connect Bluetooth devices. Your AirPods will appear as an option here like any other Bluetooth headphones would.

  其他具有蓝牙功能的设备：只需导航至蓝牙设置屏幕，即可在其中查看和连接蓝牙设备。 您的AirPods将像其他任何蓝牙耳机一样出现在此处。

If you take a little while to find the Bluetooth options, your AirPods might leave pairing mode and you’ll see the white blinking light stop. Just long-press the circular setup button again and your AirPods will re-enter pairing mode and be discoverable from your other devices once again.

如果您花一点时间查找蓝牙选项，则AirPods可能会退出配对模式，并且白色闪烁的指示灯将停止闪烁。 只需再次长按圆形设置按钮，您的AirPods就会重新进入配对模式，并且可以再次从其他设备上发现。

Once they’re connected, your AirPods will function as normal Bluetooth headphones with whatever device they’re paired to.

连接后，您的AirPods将与已配对的任何设备一起用作普通的蓝牙耳机。

如何将AirPods重新连接到iPhone或iPad (How to Reconnect Your AirPods to Your iPhone or iPad)

Your AirPods will be disconnected from your iPhone after you pair them with another non-iOS device. You’ll need to reconnect them to your iPhone to use them with your iPhone once again.

将AirPods与其他非iOS设备配对后，AirPods将与iPhone断开连接。 您需要将它们重新连接到iPhone，才能再次将它们与iPhone一起使用。

To do this, first place your AirPods back in their case. Head to your iPhone’s home screen, open the AirPods case, and hold it near your iPhone. (This same process works on an iPad, if you want to pair your AirPods with an iPad instead of an iPhone.)

为此，请先将AirPods放回盒中。 转到iPhone的主屏幕，打开AirPods机壳，并将其放在iPhone附近。 (如果要将AirPods与iPad而不是iPhone配对，则在iPad上也可以使用相同的过程。)

You’ll see a “Not Your AirPods” message appear on your screen. Tap “Connect.” You’ll then be prompted to press and hold the circular button on the back of the case. Release the button when “Connecting” appears on your screen and they’ll be automatically reconnected to your iPhone.

您会在屏幕上看到“ Not Your AirPods”消息。 点击“连接”。 然后，系统会提示您按住机箱背面的圆形按钮。 当屏幕上出现“正在连接”时，释放按钮，它们将自动重新连接到您的iPhone。

Image Credit: Peter Kotoff/Shutterstock.com, Peter Kotoff/Shutterstock.com

图片来源： Peter Kotoff /Shutterstock.com、Peter Kotoff /Shutterstock.com

翻译自: https://www.howtogeek.com/341672/how-to-pair-airpods-with-a-pc-mac-android-phone-or-other-device/

airpods配对