今天使用nomachine(NX),很多介绍都是3版本的,4版本的没搜到,自己下载安装测试了,比3感觉方便,在此记录一下,如果能帮到大家就更好了。
nomachine是窗口同步软件,只要server版和client版分别安装在服务器和客户端即可。我使用的windows管理linux。
1.软件下载
NoMachine Enterprise Server for Linux - x86_64
2.1linux安装
[root@o11grac2 sf_winshare]# rpm -ivh nomachine-enterprise-server-evaluation_4.0.362_2_x86_64.rpm
Preparing... ########################################### [100%]
1:nomachine ########################################### [100%]
NX> 700 Starting install at: Fri Nov 01 14:51:41 2013.
NX> 700 Installing: nxclient version: 4.0.362.
NX> 700 Using installation profile: Red Hat.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 Compiling the USB module.
NX> 700 Installing: nxplayer version: 4.0.362.
NX> 700 Using installation profile: Red Hat.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 Installing: nxnode version: 4.0.362.
NX> 700 Using installation profile: Red Hat.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 Creating configuration in: /usr/NX/etc/node.cfg.
NX> 700 Displaying file: /usr/NX/share/documents/node/pulseaudio-info
PulseAudio Backend
The NoMachine setup procedure could not detect your PulseAudio
installation: either PulseAudio is not installed on your system
or it was installed in a non-standard path. If PulseAudio is not
available, NoMachine audio support will try to rely on ALSA device.
Please note that you can enable PulseAudio support at any time;
to do this make sure that you have PulseAudio installed, then run:
/usr/NX/scripts/setup/nxnode --audiosetup <path>
to specify the location of the PulseAudio configuration files.
NX> 700 Installing: nxserver version: 4.0.362.
NX> 700 Using installation profile: Red Hat.
NX> 700 Install log is: /usr/NX/var/log/nxinstall.log.
NX> 700 Creating configuration in: /usr/NX/etc/server.cfg.
NX> 700 Install completed at: Fri Nov 01 14:52:17 2013.
NX> 700 NoMachine was configured to run the following service:
NX> 700 NX service on port: 4000
[root@o11grac2 sf_winshare]#
2.2windows安装(略)
3连接,打开主界面会有一路向导,然后到主页面。
点Add a computer
输入主机名和IP,其他默认,continue。
connect
验证,点YES,点NO不让过。
输入用户名和密码,OK。
选中建好的连接,CONNECT,又一堆向导帮住,最后到成功界面。
这里值得注意的是,这个是屏幕复制同步的软件,有点像网络KVM。我用的虚拟机,不论在哪边操作,两边的屏幕是同步复制的。令,要在服务器端启动图形界面才好使,字符界面貌似不行。
令:图片截取了很多,怎么都没了呢。