Arduino笔记（一）

      上周终于在淘宝上购买了Arduino Duemilanove 328开发板、温湿度传感器，去中关村中发买了些发光二极管、面包板及连线、杜邦线、无线收发模块。

       准备好Arduino ide，看着教程发现竟然忘了买电阻。没办法，只能拿开发板上自带的led做第一次学习体验了。AVR单片机的针脚13上连接有一个led。

/* Blink Turns on an LED on for one second, then off for one second, repeatedly. This example code is in the public domain. */ void setup() { // initialize the digital pin as an output. // Pin 13 has an LED connected on most Arduino boards: pinMode(13, OUTPUT); } void loop() { digitalWrite(13, HIGH); // set the LED on delay(1000); // wait for a second digitalWrite(13, LOW); // set the LED off delay(1000); // wait for a second }

 

保存，编译，上传到开发板，板上的led开始闪烁。终于走出来第一步。。。。