音视频从入门到精通——FFmpeg数据结构分析

FFmpeg数据结构分析

FFmpeg解码流程
FFmpeg结构体

重要结构体之间的关系

在这里插入图片描述

AVFormatContext

  • iformat:输入媒体的AVInputFormat,比如指向AVInputFormat ff_flv_demuxer
  • nb_streams:输入媒体的AVStream 个数
  • streams:输入媒体的AVStream []数组
  • duration:输入媒体的时长(以微秒为单位),计算方式可以参考av_dump_format()函数。
  • bit_rate:输入媒体的码率

AVInputFormat

  • name:封装格式名称
  • extensions:封装格式的扩展名
  • 一些封装格式处理的接口函数,比如read_packet()

AVStream

AVStream 是存储每一个音频/视频流信息的结构体。其重要的变量如下所示:

int index // 标识该视频/音频流
AVCodecContext *codec // 解码器,4.0 版本后已弃用
AVRational time_base // 时基。通过该值可以把PTS,DTS转化为实际的时间(单位为秒s)
int64_t duration // 该视频/音频流时长,单位为 ms
AVRational avg_frame_rate // 帧率(注:对视频来说,这个挺重要的)
AVPacket attached_pic // 附带的图片。比如说一些 MP3,AAC 音频文件附带的专辑封面
AVCodecParameters *codecpar // 音视频参数,新增用来替换AVCodecContext *codec

AVCodecParameters

AVCodecParamteres结构体是将AVCodecContext中编解码器参数抽取出而形成的新的结构体。

/**
 * This struct describes the properties of an encoded stream. 此结构描述编码流的属性
 *
 * sizeof(AVCodecParameters) is not a part of the public ABI, this struct must
 * be allocated with avcodec_parameters_alloc() and freed with
 * avcodec_parameters_free().
 */
typedef struct AVCodecParameters {
    /**
     * General type of the encoded data.编码数据的一般类型
     */
    enum AVMediaType codec_type; //编解码器的类型 
    /**
     * Specific type of the encoded data (the codec used). 编码数据的特定类型(使用的编解码器)
     */
    enum AVCodecID   codec_id; //编解码器的id
    /**
     * Additional information about the codec (corresponds to the AVI FOURCC).
	 * 有关编解码器的附加信息(对应于AVI FOURCC
     */
    uint32_t         codec_tag;

    /**
     * Extra binary data needed for initializing the decoder, codec-dependent.
     *
     * Must be allocated with av_malloc() and will be freed by
     * avcodec_parameters_free(). The allocated size of extradata must be at
     * least extradata_size + AV_INPUT_BUFFER_PADDING_SIZE, with the padding
     * bytes zeroed.
     */
    uint8_t *extradata;
    /**
     * Size of the extradata content in bytes.
     */
    int      extradata_size;

    /**
     * - video: the pixel format, the value corresponds to enum AVPixelFormat. 像素格式,该值对应于enum AVPixelFormat
     * - audio: the sample format, the value corresponds to enum AVSampleFormat. 采样格式,该值对应于enum AVSampleFormat
     */
    int format;

    /**
     * The average bitrate of the encoded data (in bits per second). 编码数据的平均比特率(以比特/秒为单位)
     */
    int64_t bit_rate;

    /**
     * The number of bits per sample in the codedwords. 编码字中每个样本的位数
     *
     * This is basically the bitrate per sample. It is mandatory for a bunch of
     * formats to actually decode them. It's the number of bits for one sample in
     * the actual coded bitstream. 这基本上是每个样本的比特率。对于一组格式来说,必须对它们进行实际解码。它是实际编码比特流中一个样本的比特数
     *
     * This could be for example 4 for ADPCM
     * For PCM formats this matches bits_per_raw_sample
     * Can be 0 例如,对于ADPCM格式,这可以是4。对于PCM格式,它匹配bits_per_raw_sample可以是0
     */
    int bits_per_coded_sample;

    /**
     * This is the number of valid bits in each output sample. If the
     * sample format has more bits, the least significant bits are additional
     * padding bits, which are always 0. Use right shifts to reduce the sample
     * to its actual size. For example, audio formats with 24 bit samples will
     * have bits_per_raw_sample set to 24, and format set to AV_SAMPLE_FMT_S32.
     * To get the original sample use "(int32_t)sample >> 8"."
	 *
     *   这是每个输出样本中的有效位数。如果样本格式有更多的位,最低有效位是额外的填充位,通常为0。
	 *	 使用右移将样本减少到实际大小。例如,具有24位样本的音频格式将bits_per_raw_sample设置为24,
	 *	 格式设置为AV_sample_FMT_S32。要获得原始样本,请使用“(int32_t)样本>>8
     * For ADPCM this might be 12 or 16 or similar
     * Can be 0
     */
    int bits_per_raw_sample;

    /**
     * Codec-specific bitstream restrictions that the stream conforms to. 
	 * 流符合的编解码器特定位流限制
     */
    int profile; //配置类型
    int level;   //配置级别

    /**
     * Video only. The dimensions of the video frame in pixels. 仅视频。视频帧的尺寸(以像素为单位)
     */
    int width;
    int height;

    /**
     * Video only. The aspect ratio (width / height) which a single pixel
     * should have when displayed. 仅视频。显示单个像素时应具有的纵横比(宽度/高度)
     *
     * When the aspect ratio is unknown / undefined, the numerator should be
     * set to 0 (the denominator may have any value). 当纵横比未知/未定义时,分子应设置为0(分母可以有任何值
     */
    AVRational sample_aspect_ratio;

    /**
     * Video only. The order of the fields in interlaced video. 隔行扫描视频中的场顺序
     */
    enum AVFieldOrder                  field_order;

    /**
     * Video only. Additional colorspace characteristics. 附加色空间特性
	 * 1, color space: YUV是基于RGB的颜色空间,color space属性是决定了YUV2RGB/RGB2YUV的转换计算matrix
	 * 2, color primaries:基于的RGB空间对应的绝对颜色XYZ的变换,决定了最终三原色RGB分别是什么颜色
	 * 3, color transfer:定义了transfer funciton的gamma值,从RGB到最终显示的值需要进行gamma压暗,比如bt709的平均gamma为1.96
	 * 4,color range:pc range和tv range(又叫video range和full range),full range中YUV的取值[0-255],video range中Y[16-235],UV [16-240]
     */
    enum AVColorRange                  color_range;  //MPEG JPEG YUV范围
    enum AVColorPrimaries              color_primaries;
    enum AVColorTransferCharacteristic color_trc;
    enum AVColorSpace                  color_space; //YUV色彩空间类型
    enum AVChromaLocation              chroma_location;

    /**
     * Video only. Number of delayed frames. 仅视频。延迟帧数
     */
    int video_delay;

    /**
     * Audio only. The channel layout bitmask. May be 0 if the channel layout is
     * unknown or unspecified, otherwise the number of bits set must be equal to
     * the channels field. 仅音频。通道布局位掩码。如果通道布局未知或未指定,则可以为0,否则设置的位数必须等于通道字段
     */
    uint64_t channel_layout;
    /**
     * Audio only. The number of audio channels. 仅音频。音频通道数
     */
    int      channels;
    /**
     * Audio only. The number of audio samples per second. 仅音频。每秒的音频采样数
     */
    int      sample_rate;
    /**
     * Audio only. The number of bytes per coded audio frame, required by some formats.
     * 仅音频。某些格式所需的每个编码音频帧的字节数
     *
     * Corresponds to nBlockAlign in WAVEFORMATEX.
     */
    int      block_align;
    /**
     * Audio only. Audio frame size, if known. Required by some formats to be static.
	 * 仅音频。音频帧大小(如果已知)。某些格式要求是静态的
     */
    int      frame_size; //每个音频帧中每个声道的采样数量

    /**
	 *
     * Audio only. The amount of padding (in samples) inserted by the encoder at
     * the beginning of the audio. I.e. this number of leading decoded samples
     * must be discarded by the caller to get the original audio without leading
     * padding.
	 *  仅音频。编码器相关参数。编码器在音频开始时插入的填充量(以样本为单位)。调用者必须丢弃该数量的前导解码样本,以获得原始音频,而不需要前导填充
     */
    int initial_padding;
    /**
     * Audio only. The amount of padding (in samples) appended by the encoder to
     * the end of the audio. I.e. this number of decoded samples must be
     * discarded by the caller from the end of the stream to get the original
     * audio without any trailing padding.
	 * 仅音频。编码器相关参数。编码器附加到音频结尾的填充量(以样本为单位)
	 * 调用者必须从流的末尾丢弃此数量的解码样本,以获得原始音频,而无任何尾随填充
     */
    int trailing_padding;
    /**
     * Audio only. Number of samples to skip after a discontinuity.
	 * 仅音频。不连续后要跳过的采样数
     */
    int seek_preroll;
	
} AVCodecParameters;

AVCodecContext

• codec:编解码器的AVCodec,比如指向AVCodec
ff_aac_latm_decoder
• width, height:图像的宽高(只针对视频)
• pix_fmt:像素格式(只针对视频)
• sample_rate:采样率(只针对音频)
• channels:声道数(只针对音频)
• sample_fmt:采样格式(只针对音频)

AVCodec

• name:编解码器名称
• type:编解码器类型
• id:编解码器ID
• 一些编解码的接口函数,比如int (*decode)()

AVPacket

• pts:显示时间戳
• dts:解码时间戳
• data:压缩编码数据
• size:压缩编码数据大小
• pos:数据的偏移地址
• stream_index:所属的AVStream,1表示音频,0表示视频

AVFrame

• data:解码后的图像像素数据(音频采样数据)
• linesize:对视频来说是图像中一行像素的大小;对音频来说是
整个音频帧的大小
• width, height:图像的宽高(只针对视频)
• key_frame:是否为关键帧(只针对视频) 。
• pict_type:帧类型(只针对视频) 。例如I, P, B
• sample_rate:音频采样率(只针对音频)
• nb_samples:音频每通道采样数(只针对音频)
• pts:显示时间戳

AVMediaType

AVMediaType 枚举表示,AVMEDIA_TYPE_VIDEO为视频数据,值为0,AVMEDIA_TYPE_AUDIO为音频视频,值为1.

/**
 * @addtogroup lavu_media Media Type
 * @brief Media Type
 */

enum AVMediaType {
    AVMEDIA_TYPE_UNKNOWN = -1,  ///< Usually treated as AVMEDIA_TYPE_DATA
    AVMEDIA_TYPE_VIDEO,
    AVMEDIA_TYPE_AUDIO,
    AVMEDIA_TYPE_DATA,          ///< Opaque data information usually continuous
    AVMEDIA_TYPE_SUBTITLE,
    AVMEDIA_TYPE_ATTACHMENT,    ///< Opaque data information usually sparse
    AVMEDIA_TYPE_NB
};

AVPixelFormat 像素格式

像素格式

enum AVPixelFormat {
    AV_PIX_FMT_NONE = -1,
    AV_PIX_FMT_YUV420P,   ///< planar YUV 4:2:0, 12bpp, (1 Cr & Cb sample per 2x2 Y samples)
    AV_PIX_FMT_YUYV422,   ///< packed YUV 4:2:2, 16bpp, Y0 Cb Y1 Cr
    AV_PIX_FMT_RGB24,     ///< packed RGB 8:8:8, 24bpp, RGBRGB...
    AV_PIX_FMT_BGR24,     ///< packed RGB 8:8:8, 24bpp, BGRBGR...
    AV_PIX_FMT_YUV422P,   ///< planar YUV 4:2:2, 16bpp, (1 Cr & Cb sample per 2x1 Y samples)
    AV_PIX_FMT_YUV444P,   ///< planar YUV 4:4:4, 24bpp, (1 Cr & Cb sample per 1x1 Y samples)
    AV_PIX_FMT_YUV410P,   ///< planar YUV 4:1:0,  9bpp, (1 Cr & Cb sample per 4x4 Y samples)
    AV_PIX_FMT_YUV411P,   ///< planar YUV 4:1:1, 12bpp, (1 Cr & Cb sample per 4x1 Y samples)
    AV_PIX_FMT_GRAY8,     ///<        Y        ,  8bpp
    ...

AVSampleFormat 采样格式

enum AVSampleFormat {
    AV_SAMPLE_FMT_NONE = -1,
    AV_SAMPLE_FMT_U8,          ///< unsigned 8 bits
    AV_SAMPLE_FMT_S16,         ///< signed 16 bits
    AV_SAMPLE_FMT_S32,         ///< signed 32 bits
    AV_SAMPLE_FMT_FLT,         ///< float,4 个字节	
    AV_SAMPLE_FMT_DBL,         ///< double,8 个字节	
    ...

FFmpeg解码流程

旧版本的ffmpeg程序, 程序开头处, 一般总是av_register_allffmpeg 4.x之后, 该函数已经废弃,不需要调用了. 在这里插入图片描述

ffmpeg官方文档网址以及参考博客

ffmpeg官方文档网址:
1、http://www.ffmpeg.org/doxygen/trunk/examples.html

这个文档是官方真正的,里面的要一个一个点击看
2、http://ffmpeg.org/documentation.html
这里是一本书:
http://www.astro-electronic.de/FFmpeg_Book.pdf

所有书:
https://trac.ffmpeg.org/wiki/BooksAndOtherExternalResources

ffmpeg参考博客
https://blog.csdn.net/u012117034/category_11652554.html

参考

FFmpeg视频播放器开发 - 解封装解码流程、常用API和结构体简介(一)
5.AVStream和AVCodecParameters

FFMPEG结构体分析:AVFrame
FFMPEG结构体分析:AVFormatContext
FFMPEG结构体分析:AVCodecContext
FFMPEG结构体分析:AVIOContext
FFMPEG结构体分析:AVCodec
FFMPEG结构体分析:AVStream
FFMPEG结构体分析:AVPacket

  • 0
    点赞
  • 7
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值