Win10 安装 altera usb blaster for FPGA

最新推荐文章于 2025-04-03 22:37:01 发布

Eloudy

最新推荐文章于 2025-04-03 22:37:01 发布

阅读量1.2k

点赞数

文章标签： ARRIA10

本文链接：https://blog.csdn.net/eloudy/article/details/131963418

版权

该文章提供了在Windows7和Windows10上安装IntelFPGAUSB-Blaster驱动的详细步骤。用户需将USB-Blaster连接到电脑，然后按照操作系统提示浏览并选择QuartusPrime安装目录下的驱动文件进行安装。对于Windows10，用户需要在设备管理器中更新驱动，选择从特定位置安装，并信任来自AlteraCorporation的软件。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

https://www.intel.com/content/www/us/en/support/programmable/support-resources/download/dri-usb-blaster-vista.html

Win7

Driver Installation for Intel FPGA USB-Blaster

Plug the USB-Blaster download cable into your PC. The Found New Hardware dialog box appears.
Select Locate and install driver software (recommended).
Select Don't search online.
When you are prompted to Insert the disc that came with your USB-Blaster, select I don’t have the disc. Show me other options.
Select Browse my computer for driver software (advanced) when you see the Windows couldn’t find driver software for your device dialog box.
Click Browse, and browse to the <Path to Quartus Prime installation>\drivers\usb-blaster directory. Note: Do not select the x32 or x64 directories.
Click OK.
Select the Include subfolders option, and click Next.
If you are prompted Windows can’t verify the publisher of this driver software, select Install this driver software anyway in the Window Security dialog box. The installation wizard guides you through the installation process.
When The software for this device has been successfully installed dialog box appears, click Close.
To complete your installation, set up programming hardware in the Intel Quartus Prime software.

For Windows 10, do the following:

Plug the USB-Blaster into your PC.
Open the Device and Printers (Control Panel | Devices and Printers).
Under Unspecified, USB Blaster should be listed. Right mouse click on this and then select Properties.
Select the Hardware tab and select Properties.
A new window should pop up with the General tab already selected. Select Change Settings.
Again a new window should pop up with the General tab already selected. Select Update.
Select Browse my computer for driver software.
Find <Path to Quartus II installation>\quartus\drivers\

(Note 1: Your altera file is located at the location you selected when you first installed quartus. The location listed in this document is the default location)
(Note 2: Stop at the drivers folder, i.e., do NOT go deeper by opening a folder within the drivers folder)

Select OK. Make sure the proper path was selected then select Next.
If the Windows security window pops up Check the Always trust software from “Altera Corporation”box and select Install.