【BLE-CC2640】CC2640之OLED

最新推荐文章于 2022-03-22 11:48:19 发布

甜甜的大香瓜

最新推荐文章于 2022-03-22 11:48:19 发布

阅读量3.2k

点赞数 1

分类专栏： BLE-CC2640

本文链接：https://blog.csdn.net/feilusia/article/details/52686966

版权

BLE-CC2640 专栏收录该内容

20 篇文章 22 订阅

订阅专栏

本篇博文最后修改时间：2017年06月02日，06:22。

一、简介

本篇以SimpleBLECentral工程为例，介绍如何在OLED（SSD1306）上显示自定义数据。

二、实验平台

协议栈版本：ble_cc26xx_2_01_00_44423

编译软件：IAR Embedded Workbench for ARM Version 7.40

硬件平台：CC26xxDK开发板

仿真器：XDS100V3（香瓜）

博主：甜甜的大香瓜

声明：喝水不忘挖井人，转载请注明出处。

原文地址：http://blog.csdn.NET/feilusia

联系方式：897503845@qq.com

香瓜BLE之CC2541群：127442605

香瓜BLE之CC2640群：557278427

香瓜BLE之Android群：541462902

香瓜单片机之STM8/STM32群：164311667

香瓜单片机之Linux群：512598061
香瓜单片机之职场交流群：450154342

甜甜的大香瓜的小店（淘宝店）：https://shop217632629.taobao.com/?spm=2013.1.1000126.d21.hd2o8i

四、代码修改

1、IAR设置中的添加宏

TI_DRIVERS_LCD_INCLUDED

其实默认已添加。

2、更换LCD驱动（替换IAR工程中的board_lcd.c）

/*******************************************************************************
  Filename:       board_lcd.c
  Revised:        $Date: 2014-03-10 07:29:12 -0700 (Mon, 10 Mar 2014) $
  Revision:       $Revision: 37597 $

  Description:    This file contains the interface to the SRF06EB LCD Service.

  Copyright 2014 Texas Instruments Incorporated. All rights reserved.

  IMPORTANT: Your use of this Software is limited to those specific rights
  granted under the terms of a software license agreement between the user
  who downloaded the software, his/her employer (which must be your employer)
  and Texas Instruments Incorporated (the "License").  You may not use this
  Software unless you agree to abide by the terms of the License. The License
  limits your use, and you acknowledge, that the Software may not be modified,
  copied or distributed unless embedded on a Texas Instruments microcontroller
  or used solely and exclusively in conjunction with a Texas Instruments radio
  frequency transceiver, which is integrated into your product.  Other than for
  the foregoing purpose, you may not use, reproduce, copy, prepare derivative
  works of, modify, distribute, perform, display or sell this Software and/or
  its documentation for any purpose.

  YOU FURTHER ACKNOWLEDGE AND AGREE THAT THE SOFTWARE AND DOCUMENTATION ARE
  PROVIDED 揂S IS?WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, 
  INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, TITLE, 
  NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL
  TEXAS INSTRUMENTS OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER CONTRACT,
  NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR OTHER
  LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
  INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE
  OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT
  OF SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
  (INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.

  Should you have any questions regarding your right to use this Software,
  contact Texas Instruments Incorporated at www.TI.com. 
*******************************************************************************/

/*********************************************************************
 * INCLUDES
 */
#include <ti/sysbios/knl/Task.h>
#include <ti/sysbios/knl/Clock.h>
#include <ti/sysbios/knl/Semaphore.h>
#include <ti/sysbios/knl/Queue.h>
#include <ti/drivers/lcd/LCDDogm1286.h>

#include "board_lcd.h"
#include "Board.h"

/*********************************************************************
 * TYPEDEFS
 */

/*********************************************************************
 * LOCAL FUNCTIONS
 */

/*******************************************************************************
 * EXTERNAL VARIABLES
 */

/*********************************************************************
 * LOCAL VARIABLES
 */

/*********************************************************************
 * PUBLIC FUNCTIONS
 */

/*
【注意】我们的开发板的底板目前总共有两个版本，为V1.2版本与V2.0版本，
 版本号显示于底板上部正中间位置， 这两个底板的版本主要是OLED显示屏的复位线的不同，
 V1.2版本使用DIO_5作为OLED显示屏的复位控制端口（此端口与IIC接口共用 了，是我们的设计失误），
 V2.0版本使用DIO_26作为OLED显示屏的复位控制端口。因此，请根据你底板上标注的版本号进行对应操作。
*/
#define HW_VER1_2       12  // 硬件版本V1.2
#define HW_VER2_0       20  // 硬件版本V2.0
#define HW_VER          HW_VER2_0


#define  uint8  unsigned char
#define  uint16  unsigned short
#define  uint32  unsigned int


#define TI_DRIVERS_LCD_AMOMCU




#ifdef TI_DRIVERS_LCD_AMOMCU
#include "stdio.h"
#include "string.h"



#include "util.h"
#include "Board.h"

#ifdef NPI_USE_UART
#include "Board_uart.h"
#endif


#define LCD_SCL GPIO_PIN_9       //SCLK  时钟 D0（SCLK）
#define LCD_SDA GPIO_PIN_10     //SDA   D1（MOSI） 数据
#define LCD_RST GPIO_PIN_4       //_RES  hardware reset   复位 

#if(HW_VER == HW_VER1_2 )
#define LCD_DC  GPIO_PIN_5       //A0  H/L 命令数据选通端，H：数据，L:命令
#elif (HW_VER == HW_VER2_0)
#define LCD_DC  GPIO_PIN_26      //A0  H/L 命令数据选通端，H：数据，L:命令
#endif

#define X_WIDTH        128
#define Y_WIDTH        64


/* LCD lines */
#define LCD_MAX_LINE_COUNT              8
#define LCD_MAX_LINE_LENGTH             21
#define LCD_MAX_BUF                     25


#define HAL_LCD_MAX_CHARS   16
#define HAL_LCD_MAX_BUFF    25



#define LCD_SUPPORT
#define HAL_LCD   TRUE

static uint8 Lcd_Line1[HAL_LCD_MAX_CHARS+1];

 
#ifdef LCD_SUPPORT
/***************************16*16的点阵字体取模方式：共阴——列行式——逆向输出*********/
const unsigned char F16x16[] = 	  	 
{  	  
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

	
	
/*--  文字:  服  --*/
0x00,0xFF,0xFF,0x33,0xFF,0xFF,0x00,0xFF,0xFF,0xC3,0xDB,0xDB,0xDF,0xCF,0x00,0x00,
0x20,0x7F,0x1F,0x63,0x7F,0x3F,0x00,0x7F,0x7F,0x20,0x37,0x18,0x3F,0x73,0x20,0x00,

/*--  文字:  务  --*/
0x80,0x80,0x90,0x98,0xCC,0xDF,0x77,0x66,0x66,0xF6,0xDE,0x8E,0x80,0x80,0x80,0x00,
0x00,0x61,0x61,0x67,0x36,0x3E,0x1F,0x07,0x06,0x66,0x7E,0x3F,0x01,0x01,0x00,0x00,

/*--  文字:  创  --*/
0x20,0x30,0xF8,0xEC,0x67,0x6F,0xFC,0xF8,0x10,0xF8,0xF8,0x00,0xFE,0xFE,0x00,0x00,
0x00,0x00,0x3F,0x7F,0x60,0x66,0x67,0x73,0x30,0x0F,0x0F,0x60,0x7F,0x3F,0x00,0x00,

/*--  文字:  新  --*/
0x00,0x66,0x7E,0x7E,0xE7,0xFF,0x7E,0x66,0x00,0xFE,0xFE,0x66,0xE6,0xE7,0x63,0x00,
0x00,0x33,0x1B,0x63,0x7F,0x3F,0x0B,0x5B,0x70,0x3F,0x0F,0x00,0x7F,0x7F,0x00,0x00,

0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,


/*--  文字:  深  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x61,0x06,0xE0,0x00,0x26,0x22,0x1A,0x02,0xC2,0x0A,0x12,0x32,0x06,0x02,0x00,
0x04,0xFC,0x03,0x20,0x20,0x11,0x11,0x09,0x05,0xFF,0x05,0x09,0x19,0x31,0x10,0x00,

/*--  文字:  圳  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x10,0x10,0xFE,0x10,0x10,0xFE,0x00,0x00,0xFC,0x00,0x00,0x00,0xFE,0x00,0x00,
0x08,0x08,0x04,0x47,0x24,0x18,0x07,0x00,0x00,0x1F,0x00,0x00,0x00,0x7F,0x00,0x00,

/*--  文字:  市  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x04,0x04,0x04,0xE4,0x24,0x24,0x25,0xFE,0x24,0x24,0x24,0x24,0xE4,0x04,0x04,0x00,
0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0xFF,0x00,0x00,0x10,0x20,0x1F,0x00,0x00,0x00,

/*--  文字:  电  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0xF8,0x48,0x48,0x48,0x48,0xFF,0x48,0x48,0x48,0x48,0xF8,0x00,0x00,0x00,
0x00,0x00,0x0F,0x04,0x04,0x04,0x04,0x3F,0x44,0x44,0x44,0x44,0x4F,0x40,0x70,0x00,

/*--  文字:  装  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x42,0x2C,0x24,0x10,0xFF,0x04,0x64,0xA4,0x24,0x3F,0x24,0x24,0x24,0x04,0x00,
0x20,0x21,0x11,0x11,0xF9,0x45,0x23,0x03,0x05,0x09,0x11,0x29,0x45,0xC1,0x41,0x00,

/*--  文字:  科  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x12,0x92,0x72,0xFE,0x51,0x91,0x00,0x22,0xCC,0x00,0x00,0xFF,0x00,0x00,0x00,
0x04,0x02,0x01,0x00,0xFF,0x00,0x04,0x04,0x04,0x02,0x02,0x02,0xFF,0x01,0x01,0x00,

/*--  文字:  技  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x08,0x08,0x88,0xFF,0x48,0x28,0x00,0xC8,0x48,0x48,0x7F,0x48,0xC8,0x48,0x08,0x00,
0x01,0x41,0x80,0x7F,0x00,0x40,0x40,0x20,0x13,0x0C,0x0C,0x12,0x21,0x60,0x20,0x00,

/*--  文字:  专  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x20,0x24,0x24,0xA4,0x64,0x3C,0x27,0x24,0x24,0xA4,0x24,0x24,0x20,0x20,0x00,
0x00,0x00,0x00,0x00,0x01,0x01,0x09,0x11,0x29,0x45,0x03,0x01,0x00,0x00,0x00,0x00,

/*--  文字:  业  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x10,0x60,0x80,0x00,0xFF,0x00,0x00,0x00,0xFF,0x00,0x80,0x60,0x38,0x10,0x00,
0x20,0x20,0x20,0x23,0x21,0x3F,0x20,0x20,0x20,0x3F,0x22,0x21,0x20,0x30,0x20,0x00,

/*--  文字:  专  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x20,0x24,0x24,0xA4,0x64,0x3C,0x27,0x24,0x24,0xA4,0x24,0x24,0x20,0x20,0x00,
0x00,0x00,0x00,0x00,0x01,0x01,0x09,0x11,0x29,0x45,0x03,0x01,0x00,0x00,0x00,0x00,

/*--  文字:  注  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x10,0x60,0x01,0x86,0x60,0x08,0x08,0x08,0x09,0xFE,0x08,0x08,0x08,0x08,0x08,0x00,
0x04,0x04,0xFE,0x01,0x40,0x40,0x41,0x41,0x41,0x7F,0x41,0x41,0x41,0x41,0x40,0x00,

/*--  文字:  无  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x40,0x42,0x42,0x42,0x42,0x42,0xFE,0xC2,0x42,0x42,0x42,0x42,0x42,0x40,0x00,
0x40,0x40,0x20,0x10,0x08,0x04,0x03,0x00,0x3F,0x40,0x40,0x40,0x40,0x40,0x70,0x00,

/*--  文字:  线  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x60,0x58,0xC7,0x62,0x00,0x90,0x90,0x90,0xFF,0x90,0x92,0x9C,0x94,0x80,0x00,
0x20,0x22,0x23,0x12,0x12,0x12,0x20,0x20,0x10,0x13,0x0C,0x14,0x22,0x40,0xF8,0x00,

/*--  文字:  通  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x41,0xC6,0x00,0x00,0xF2,0x52,0x52,0x56,0xFA,0x5A,0x56,0xF2,0x00,0x00,0x00,
0x40,0x20,0x1F,0x20,0x40,0x5F,0x42,0x42,0x42,0x5F,0x4A,0x52,0x4F,0x40,0x40,0x00,

/*--  文字:  讯  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x21,0x2E,0xE4,0x00,0x42,0x42,0xFE,0x42,0x42,0x42,0x02,0xFE,0x00,0x00,0x00,
0x00,0x00,0x00,0x7F,0x20,0x10,0x00,0x7F,0x00,0x00,0x00,0x00,0x3F,0x40,0x38,0x00,

/*--  文字:  十  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x40,0x40,0x40,0x40,0x40,0x40,0xFF,0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  年  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x20,0x10,0x0C,0xE3,0x22,0x22,0x22,0xFE,0x22,0x22,0x22,0x22,0x02,0x00,0x00,
0x04,0x04,0x04,0x04,0x07,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x04,0x04,0x00,

/*--  文字:  经  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x30,0xAC,0x63,0x10,0x00,0x40,0x42,0x22,0x22,0x12,0x1A,0x26,0x42,0xC0,0x00,
0x22,0x23,0x22,0x12,0x12,0x00,0x20,0x21,0x21,0x21,0x3F,0x21,0x21,0x21,0x20,0x00,

/*--  文字:  验  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x02,0xFA,0x82,0x82,0xFE,0x80,0x40,0x60,0x58,0x46,0x48,0x50,0x20,0x20,0x20,0x00,
0x08,0x08,0x04,0x24,0x40,0x3F,0x22,0x2C,0x21,0x2E,0x20,0x30,0x2C,0x23,0x20,0x00,

/*--  文字:  开  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0x00,
0x00,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  拓  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x08,0x08,0x08,0xFF,0x48,0x28,0x0A,0x02,0xE2,0x9E,0x82,0x82,0x82,0x82,0x02,0x00,
0x02,0x42,0x81,0x7F,0x00,0x08,0x04,0x03,0x7F,0x20,0x20,0x20,0x20,0x7F,0x00,0x00,

/*--  文字:  创  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x40,0x20,0xD0,0x4C,0x43,0x44,0x48,0xD8,0x30,0x10,0x00,0xFC,0x00,0x00,0xFF,0x00,
0x00,0x00,0x3F,0x40,0x40,0x42,0x44,0x43,0x78,0x00,0x00,0x07,0x20,0x40,0x3F,0x00,

/*--  文字:  新  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x24,0x2C,0x35,0xE6,0x34,0x2C,0x24,0x00,0xFC,0x24,0x24,0xE2,0x22,0x22,0x00,
0x21,0x11,0x4D,0x81,0x7F,0x05,0x59,0x21,0x18,0x07,0x00,0x00,0xFF,0x00,0x00,0x00,

/*--  文字:  ！  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x5F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

};

/****************************************8*16的点阵************************************/
static const unsigned char F8X16[]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};
#endif


/************************************6*8的点阵************************************/
static const unsigned char F6x8[92][6] =		
{
0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};

#if 1
unsigned char BMP[] = 	  	 
{
/*--  调入了一幅图像：C:\Users\Administrator\Desktop\图片2.bmp  --*/
/*--  宽度x高度=128x64  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xF0,0xF8,0xF8,0xF8,0xF8,0xF0,0x80,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xC0,0x00,
0x00,0x00,0x00,0xE0,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0x00,0x00,0x00,0x00,0x80,
0xC0,0xE0,0xF0,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF0,0xE0,0xC0,0x80,0x00,
0x00,0x00,0x00,0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF0,0x00,0x00,0x00,0x00,0x00,0xF0,
0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF0,0x00,0x00,0x00,0x00,0x80,0xE0,0xF0,0xF0,0xF8,
0xF8,0xF8,0xF8,0xF8,0xF8,0xF8,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x00,0xF8,0xF8,0xF8,
0xF8,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0xF0,0xF8,0xF8,0xF8,0xF8,0xF8,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xF8,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,0xFF,
0xF0,0xC0,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,
0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0xF8,0xFE,0xFF,
0xFF,0xFF,0xBF,0x07,0x03,0x01,0x01,0x01,0x03,0x03,0x0F,0xFF,0xFF,0xFF,0xFF,0xFE,
0xE0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0x00,0x80,0xFC,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0x1F,0x07,
0x03,0x01,0x01,0x03,0x03,0x0F,0x3F,0x3F,0x1F,0x1F,0x0C,0x00,0x00,0xFF,0xFF,0xFF,
0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0xE0,0xFC,0xFF,0xFF,0xFF,0xFF,0xEF,0xE0,0xE0,0xEF,0xFF,0xFF,
0xFF,0xFF,0xF8,0xC0,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x3F,0xFF,0xFF,0xFF,
0xFE,0xF6,0xFF,0xFF,0xFF,0x3F,0xF8,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0xFF,
0xFF,0xFF,0xA0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xFF,0xFF,0xFF,0xFF,
0xFF,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xF9,0x3F,0xFF,0xFF,0xFF,0xF8,0xFE,0xFF,0xFF,
0xFF,0x07,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xC0,0x80,0x80,0x00,0x00,0x00,0xFF,0xFF,0xFF,
0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,
0x00,0x00,0xE0,0xFE,0xFF,0xFF,0xFF,0xFF,0x0F,0x07,0x07,0x07,0x07,0x07,0x07,0x1F,
0xFF,0xFF,0xFF,0xFF,0xFC,0x80,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x07,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x1F,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x03,0x0F,0x3F,
0x7F,0xFF,0xFF,0xFC,0xF8,0xF0,0xF0,0xF0,0xF0,0xF8,0xFC,0xFF,0xFF,0xFF,0x3F,0x1F,
0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x07,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x03,0x1F,0x7F,0xFF,0xFF,0xFF,0xF8,
0xF0,0xF0,0xF0,0xF0,0xF8,0xFF,0xFF,0xFF,0x7F,0x3F,0x07,0x00,0x00,0x0F,0x7F,0xFF,
0xFF,0xFF,0xFC,0xF0,0xF0,0xF0,0xF0,0xF8,0xFF,0xFF,0xFF,0xFF,0x3F,0x07,0x00,0x00,
0x00,0x00,0x03,0x03,0x03,0x03,0xC3,0xE1,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,0xE0,
0xE3,0xE3,0xE3,0xE3,0xE3,0xE3,0xE0,0xE3,0xE3,0xE3,0xE3,0xE3,0xE0,0xE0,0xE3,0xE3,
0xE3,0xE3,0xE3,0xE3,0xE0,0xE0,0xE3,0xE3,0xE3,0xE3,0xE3,0xE0,0xE0,0xE0,0xE0,0xE0,
0xE0,0xE1,0xE1,0xE3,0x03,0x07,0x07,0x07,0x07,0x03,0x03,0x01,0x01,0x00,0x00,0x00,
0x00,0x00,0x00,0x03,0x03,0x03,0x83,0xE3,0xE0,0xF0,0xF3,0xF3,0xF3,0xF3,0xF3,0xF0,
0xF0,0xF0,0xF3,0xF3,0xF3,0xF3,0xF3,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF1,0xF3,0xF3,
0xF7,0xF7,0xF7,0xF7,0xF3,0xF3,0xF1,0xF1,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,
0xF1,0xF3,0xF3,0xF7,0xE7,0xE7,0xC7,0x07,0x03,0x03,0x01,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0xFC,0xFD,0xFB,0xF7,0xE7,0xCF,0xDF,0xBF,0x3F,
0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xBF,0x9F,0xDF,0xEF,0xF7,
0xF7,0xFB,0xFD,0xFC,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x01,0x00,0xFE,0xFE,0xFE,
0xFE,0xFE,0xFE,0x00,0x00,0xFE,0xFE,0xFE,0xFE,0xFE,0xFE,0x00,0xFE,0xFE,0xFE,0xFE,
0xFE,0xFE,0x00,0x00,0xFE,0xFE,0xFE,0xFE,0xFE,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0xE0,0xE0,0xE0,0xE0,0xC0,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0x7F,0x7F,0xBF,0xDF,0xCF,0xEF,
0xF7,0xF8,0xF9,0xF9,0xF3,0xF7,0xEF,0xDF,0xDF,0xBF,0x7F,0x7F,0xFF,0xFF,0xFF,0x7F,
0x7F,0xBF,0xDF,0xCF,0xE7,0xF7,0xFB,0xF9,0xF9,0xF0,0xF7,0xEF,0xDF,0xDF,0xBF,0x7F,
0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x7F,0x7F,0x7F,0x3F,0x18,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x3B,0x3B,0x3D,0x3E,0x3E,0x3F,0x3F,0x3F,0x3F,0x3F,
0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3E,0x3E,0x3E,0x3E,0x3F,
0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,0x3F,
0x3E,0x3D,0x3D,0x3B,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x3F,0x7F,0x7F,0x78,0x78,0x7B,0x7B,0x7B,
0x7B,0x7B,0x7B,0x78,0x78,0x7B,0x7B,0x7B,0x7B,0x7B,0x7B,0x78,0x7B,0x7B,0x7B,0x7B,
0x7B,0x7B,0x78,0x78,0x7B,0x7B,0x7B,0x7B,0x7B,0x7B,0x78,0x78,0x78,0x78,0x78,0x78,
0x78,0x78,0x7F,0x7F,0x7F,0x3F,0x1F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};
#endif
void Draw_BMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[]);

static void _itoa(unsigned int uiNum, unsigned char *buf, unsigned char uiRadix)
{
    unsigned char c, i;
    unsigned char *p, rst[32];

    p = rst;
    for (i = 0; i < 32; i++, p++)
    {
        /* Isolate a digit */
        c = uiNum % uiRadix;
        /* Convert to Ascii */
        *p = c + ((c < 10) ? '0' : '7');
        uiNum /= uiRadix;
        if (!uiNum)
            break;
    }

    for (c = 0; c <= i; c++)
    {
        /* Reverse character order */
        *buf++ = *p--;
    }
    *buf = '\0';
}

static unsigned char * _ltoa(unsigned long l, unsigned char *buf, unsigned char radix)
{
#if defined (__TI_COMPILER_VERSION)
  return ( (unsigned char*)ltoa( l, (char *)buf ) );
#elif defined( __GNUC__ )
  return ( (char*)ltoa( l, buf, radix ) );
#else
  unsigned char tmp1[10] = "", tmp2[10] = "", tmp3[10] = "";
  unsigned short num1, num2, num3;
  unsigned char i;

  buf[0] = '\0';

  if ( radix == 10 )
  {
    num1 = l % 10000;
    num2 = (l / 10000) % 10000;
    num3 = (unsigned short)(l / 100000000);

    if (num3) _itoa(num3, tmp3, 10);
    if (num2) _itoa(num2, tmp2, 10);
    if (num1) _itoa(num1, tmp1, 10);

    if (num3)
    {
      strcpy((char*)buf, (char const*)tmp3);
      for (i = 0; i < 4 - strlen((char const*)tmp2); i++)
        strcat((char*)buf, "0");
    }
    strcat((char*)buf, (char const*)tmp2);
    if (num3 || num2)
    {
      for (i = 0; i < 4 - strlen((char const*)tmp1); i++)
        strcat((char*)buf, "0");
    }
    strcat((char*)buf, (char const*)tmp1);
    if (!num3 && !num2 && !num1)
      strcpy((char*)buf, "0");
  }
  else if ( radix == 16 )
  {
    num1 = l & 0x0000FFFF;
    num2 = l >> 16;

    if (num2) _itoa(num2, tmp2, 16);
    if (num1) _itoa(num1, tmp1, 16);

    if (num2)
    {
      strcpy((char*)buf,(char const*)tmp2);
      for (i = 0; i < 4 - strlen((char const*)tmp1); i++)
        strcat((char*)buf, "0");
    }
    strcat((char*)buf, (char const*)tmp1);
    if (!num2 && !num1)
      strcpy((char*)buf, "0");
  }
  else
    return NULL;

  return buf;
#endif
}


/*********************LCD 延时1ms************************************/
void LCD_DLY_ms(unsigned int ms)
{                         
    unsigned int a;
    while(ms)
    {
        a=1800;
        while(a--);
        ms--;
    }
    return;
}

/*********************LCD写数据************************************/ 
void LCD_WrDat(unsigned char dat)     
{
    unsigned char i=8, temp=0;
    GPIOPinWrite(LCD_DC, 1);  
    for(i=0;i<8;i++) //发送一个八位数据 
    {
        GPIOPinWrite(LCD_SCL, 0);  
        
        temp = dat&0x80;
        if (temp == 0)
        {
            GPIOPinWrite(LCD_SDA, 0);
        }
        else
        {
            GPIOPinWrite(LCD_SDA, 1);
        }
        GPIOPinWrite(LCD_SCL, 1);       
        dat<<=1;    
    }
}
/*********************LCD写命令************************************/                                        
void LCD_WrCmd(unsigned char cmd)
{
    unsigned char i=8, temp=0;
    GPIOPinWrite(LCD_DC, 0);  
    for(i=0;i<8;i++) //发送一个八位数据 
    { 
        GPIOPinWrite(LCD_SCL, 0);  
       
        temp = cmd&0x80;
        if (temp == 0)
        {
            GPIOPinWrite(LCD_SDA, 0);
        }
        else
        {
            GPIOPinWrite(LCD_SDA, 1);
        }
        GPIOPinWrite(LCD_SCL, 1);  
        cmd<<=1;;        
    }     
}
/*********************LCD 设置坐标************************************/
void LCD_Set_Pos(unsigned char x, unsigned char y) 
{ 
    LCD_WrCmd(0xb0+y);
    LCD_WrCmd(((x&0xf0)>>4)|0x10);
    LCD_WrCmd((x&0x0f)|0x01); 
} 
/*********************LCD全屏************************************/
void LCD_Fill(unsigned char bmp_dat) 
{
    unsigned char y,x;
    for(y=0;y<8;y++)
    {
        LCD_WrCmd(0xb0+y);
        LCD_WrCmd(0x01);
        LCD_WrCmd(0x10);
        for(x=0;x<X_WIDTH;x++)
            LCD_WrDat(bmp_dat);
    }
}

/***************功能描述：行填充, y为页范围0～7****************/
void LCD_FillLine(unsigned char y,unsigned char ch)
{
    unsigned char x;    
    LCD_WrCmd(0xb0+y);
    LCD_WrCmd(0x01);
    LCD_WrCmd(0x10); 
    for(x=0;x<X_WIDTH;x++)
        LCD_WrDat(ch);
}

/*********************LCD复位************************************/
void LCD_CLS(void)
{
    unsigned char y,x;    
    for(y=0;y<8;y++)
    {
        LCD_WrCmd(0xb0+y);
        LCD_WrCmd(0x01);
        LCD_WrCmd(0x10); 
        for(x=0;x<X_WIDTH;x++)
            LCD_WrDat(0);
    }
}
/*********************LCD初始化************************************/
void HalLcd_HW_Init(void)     
{  
    GPIODirModeSet(LCD_SCL, GPIO_DIR_MODE_OUT);
    GPIODirModeSet(LCD_SDA, GPIO_DIR_MODE_OUT);
    GPIODirModeSet(LCD_RST, GPIO_DIR_MODE_OUT);
    GPIODirModeSet(LCD_DC, GPIO_DIR_MODE_OUT);
    
    GPIOPinWrite(LCD_SCL, 1);  
    GPIOPinWrite(LCD_RST, 0);

    LCD_DLY_ms(250);

    GPIOPinWrite(LCD_RST, 1);      //从上电到下面开始初始化要有足够的时间，即等待RC复位完毕   


    LCD_WrCmd(0xae);//--turn off oled panel
    LCD_WrCmd(0x00);//---set low column address
    LCD_WrCmd(0x10);//---set high column address
    LCD_WrCmd(0x40);//--set start line address  Set Mapping RAM Display Start Line (0x00~0x3F)
    LCD_WrCmd(0x81);//--set contrast control register
    LCD_WrCmd(0xcf); // Set SEG Output Current Brightness
    LCD_WrCmd(0xa1);//--Set SEG/Column Mapping     0xa0左右反置 0xa1正常
    LCD_WrCmd(0xc8);//Set COM/Row Scan Direction   0xc0上下反置 0xc8正常
    LCD_WrCmd(0xa6);//--set normal display
    LCD_WrCmd(0xa8);//--set multiplex ratio(1 to 64)
    LCD_WrCmd(0x3f);//--1/64 duty
    LCD_WrCmd(0xd3);//-set display offset    Shift Mapping RAM Counter (0x00~0x3F)
    LCD_WrCmd(0x00);//-not offset
    LCD_WrCmd(0xd5);//--set display clock divide ratio/oscillator frequency
    LCD_WrCmd(0x80);//--set divide ratio, Set Clock as 100 Frames/Sec
    LCD_WrCmd(0xd9);//--set pre-charge period
    LCD_WrCmd(0xf1);//Set Pre-Charge as 15 Clocks & Discharge as 1 Clock
    LCD_WrCmd(0xda);//--set com pins hardware configuration
    LCD_WrCmd(0x12);
    LCD_WrCmd(0xdb);//--set vcomh
    LCD_WrCmd(0x40);//Set VCOM Deselect Level
    LCD_WrCmd(0x20);//-Set Page Addressing Mode (0x00/0x01/0x02)
    LCD_WrCmd(0x02);//
    LCD_WrCmd(0x8d);//--set Charge Pump enable/disable
    LCD_WrCmd(0x14);//--set(0x10) disable
    LCD_WrCmd(0xa4);// Disable Entire Display On (0xa4/0xa5)
    LCD_WrCmd(0xa6);// Disable Inverse Display On (0xa6/a7) 
    LCD_WrCmd(0xaf);//--turn on oled panel
    LCD_Fill(0x00); //初始成黑屏
    LCD_Set_Pos(0,0);   


   
} 
/***************功能描述：显示6*8一组标准ASCII字符串    显示的坐标（x,y），y为页范围0～7****************/
void LCD_P6x8Str(unsigned char x, unsigned char y,unsigned char ch[])
{
    unsigned char c=0,i=0,j=0;      
    while (ch[j]!='\0')
    {    
        c =ch[j]-32;
        if(x>126){x=0;y++;}
        LCD_Set_Pos(x,y);  
        if(c > 0 && c < 92)
        {
            for(i=0;i<6;i++)     
                LCD_WrDat(F6x8[c][i]);  
        }
        x+=6;
        j++;
    }
}

/***********功能描述：显示一行ascii 码?无显示的点阵显示黑色,     y为页的范围0～7*****************/
void HalLcd_HW_WriteLine(unsigned char line, const char *pText)
{
    LCD_FillLine(line, 0);                            //先把这一行显示成黑色
    LCD_P6x8Str(0, line, (unsigned char *)pText);
}

#ifdef LCD_SUPPORT
/*******************功能描述：显示8*16一组标准ASCII字符串     显示的坐标（x,y），y为页范围0～7****************/
void LCD_P8x16Str(unsigned char x, unsigned char y,unsigned char ch[])
{
    unsigned char c=0,i=0,j=0;
    while (ch[j]!='\0')
    {    
        c =ch[j]-32;
        if(x>120){x=0;y++;}
        LCD_Set_Pos(x,y);    
        for(i=0;i<8;i++)     
            LCD_WrDat(F8X16[c*16+i]);
        LCD_Set_Pos(x,y+1);    
        for(i=0;i<8;i++)     
            LCD_WrDat(F8X16[c*16+i+8]);  
        x+=8;
        j++;
    }
}
/*****************功能描述：显示16*16点阵  显示的坐标（x,y），y为页范围0～7****************************/
void LCD_P16x16Ch(unsigned char x, unsigned char y, unsigned char N)
{
    unsigned char wm=0;
    unsigned int adder=32*N;  //      
    LCD_Set_Pos(x , y);
    for(wm = 0;wm < 16;wm++)  //             
    {
        LCD_WrDat(F16x16[adder]);    
        adder += 1;
    }      
    LCD_Set_Pos(x,y + 1); 
    for(wm = 0;wm < 16;wm++) //         
    {
        LCD_WrDat(F16x16[adder]);
        adder += 1;
    }           
}

/***********功能描述：显示显示BMP图片128×64起始点坐标(x,y),x的范围0～127，y为页的范围0～7*****************/
void Draw_BMP(unsigned char x0, unsigned char y0,unsigned char x1, unsigned char y1,unsigned char BMP[])
{     
    unsigned int j=0;
    unsigned char x,y;
    
    if(y1%8==0) y=y1/8;      
    else y=y1/8+1;
    for(y=y0;y<y1;y++)
    {
        LCD_Set_Pos(x0,y);                
        for(x=x0;x<x1;x++)
        {      
            LCD_WrDat(BMP[j++]);            
        }
    }
} 
#endif





/**************************************************************************************************
z-stack代码,未修改
 **************************************************************************************************/
void HalLcdInit(void)
{
#if (HAL_LCD == TRUE)
  HalLcd_HW_Init();
#endif
}


void Draw_AmoMcu_Logo()
{
    Draw_BMP(0,0,128, 8,BMP);    
}


/*************************************************************************************************
 *                    LCD EMULATION FUNCTIONS
 *
 * Some evaluation boards are equipped with Liquid Crystal Displays
 * (LCD) which may be used to display diagnostic information. These
 * functions provide LCD emulation, sending the diagnostic strings
 * to Z-Tool via the RS232 serial port. These functions are enabled
 * when the "LCD_SUPPORTED" compiler flag is placed in the makefile.
 *
 * Most applications update both lines (1 and 2) of the LCD whenever
 * text is posted to the device. This emulator assumes that line 1 is
 * updated first (saved locally) and the formatting and send operation
 * is triggered by receipt of line 2. Nothing will be transmitted if
 * only line 1 is updated.
 *
 *************************************************************************************************/


/**************************************************************************************************
z-stack代码,未修改
 **************************************************************************************************/
void HalLcdWriteString ( char *str, uint8 option)
{
  
#ifdef LCD_TO_UART
  UART_WriteTransport ( (uint8*)str, strlen(str)); 
  UART_WriteTransport ("\r\n",2);
#endif
  
#if (HAL_LCD == TRUE)

  uint8 strLen = 0;
  //uint8 totalLen = 0;
  //uint8 *buf;
  uint8 tmpLen;

  if ( Lcd_Line1 == NULL )
  {
    //Lcd_Line1 = osal_mem_alloc( HAL_LCD_MAX_CHARS+1 );
    HalLcdWriteString( "TexasInstruments", 1 );
  }

  strLen = (uint8)strlen( (char*)str );

  /* Check boundries */
  if ( strLen > HAL_LCD_MAX_CHARS )
    strLen = HAL_LCD_MAX_CHARS;

  if ( option == 0 )
  {
    /* Line 1 gets saved for later */
    memcpy( Lcd_Line1, str, strLen );
    Lcd_Line1[strLen] = '\0';
  }
  else
  {
    char buf[64];
    /* Line 2 triggers action */
    tmpLen = (uint8)strlen( (char*)Lcd_Line1 );
    //totalLen =  tmpLen + 1 + strLen + 1;
    //buf = osal_mem_alloc( totalLen );
    if ( buf != NULL )
    {
      /* Concatenate strings */
      memcpy( buf, Lcd_Line1, tmpLen );
      buf[tmpLen++] = ' ';
      memcpy( &buf[tmpLen], str, strLen );
      buf[tmpLen+strLen] = '\0';

      /* Send it out */
#if defined (ZTOOL_P1) || defined (ZTOOL_P2)

#if defined(SERIAL_DEBUG_SUPPORTED)
      debug_str( (uint8*)buf );
#endif //LCD_SUPPORTED

#endif //ZTOOL_P1

      /* Free mem */
      //osal_mem_free( buf );
    }
  }

  /* Display the string */
  HalLcd_HW_WriteLine (option, str);

#endif //HAL_LCD

}

/**************************************************************************************************
 * @fn      HalLcdWriteValue
 *
 * @brief   Write a value to the LCD,
            向lcd指定行写入一个32位的值
 *
 * @param   value  - value that will be displayed,
            需要显示的32位数
 *          radix  - 8, 10, 16,
            进制，8进制显示 10进制显示，16进制显示
 *          option - display options,
            指定行显示
 *
 * @return  None
 **************************************************************************************************/
void HalLcdWriteValue ( uint32 value, const uint8 radix, uint8 option)
{
#if (HAL_LCD == TRUE)
  uint8 buf[LCD_MAX_BUF];

  _ltoa( value, &buf[0], radix );
  HalLcdWriteString( (char*)buf, option );
#endif
}

/**************************************************************************************************
z-stack代码,未修改
 **************************************************************************************************/
void HalLcdWriteScreen( char *line1, char *line2 )
{
#if (HAL_LCD == TRUE)
  HalLcdWriteString( line1, 1 );
  HalLcdWriteString( line2, 2 );
#endif
}

/**************************************************************************************************
z-stack代码,未修改
 **************************************************************************************************/
void HalLcdWriteStringValue( char *title, uint16 value, uint8 format, uint8 line )
{
#if (HAL_LCD == TRUE)
  uint8 tmpLen;
  uint8 buf[LCD_MAX_BUF] = {0};
  uint32 err;

  tmpLen = (uint8)strlen( (char*)title );
  memcpy( buf, title, tmpLen );
  buf[tmpLen] = ' ';
  err = (uint32)(value);
  _ltoa( err, &buf[tmpLen+1], format );
  HalLcdWriteString( (char*)buf, line );		
#endif
}

void HalLcdWriteStringString( char *title, uint8 *string, uint8 line )
{
#if (HAL_LCD == TRUE)
  char str[128];
  sprintf(str, "%s%s", title, (char*)string);
  HalLcdWriteString( (char*)str, line );		
#endif
}


/**************************************************************************************************
z-stack代码,未修改
 **************************************************************************************************/
void HalLcdWriteStringValueValue( char *title, uint16 value1, uint8 format1,
                                  uint16 value2, uint8 format2, uint8 line )
{

#if (HAL_LCD == TRUE)

  uint8 tmpLen;
  uint8 buf[LCD_MAX_BUF];
  uint32 err;

  tmpLen = (uint8)strlen( (char*)title );
  if ( tmpLen )
  {
    memcpy( buf, title, tmpLen );
    buf[tmpLen++] = ' ';
  }

  err = (uint32)(value1);
  _ltoa( err, &buf[tmpLen], format1 );
  tmpLen = (uint8)strlen( (char*)buf );

  buf[tmpLen++] = ',';
  buf[tmpLen++] = ' ';
  err = (uint32)(value2);
  _ltoa( err, &buf[tmpLen], format2 );

  HalLcdWriteString( (char *)buf, line );		

#endif
}

/**************************************************************************************************
z-stack代码,未修改
 **************************************************************************************************/
void HalLcdDisplayPercentBar( char *title, uint8 value )
{
#if (HAL_LCD == TRUE)

  uint8 percent;
  uint8 leftOver;
  uint8 buf[17];
  uint32 err;
  uint8 x;

  /* Write the title: */
  HalLcdWriteString( title, 0 );

  if ( value > 100 )
    value = 100;

  /* convert to blocks */
  percent = (uint8)(value / 10);
  leftOver = (uint8)(value % 10);

  /* Make window */
  memcpy( buf, "[          ]  ", 15 );

  for ( x = 0; x < percent; x ++ )
  {
    buf[1+x] = '>';
  }

  if ( leftOver >= 5 )
    buf[1+x] = '+';

  err = (uint32)value;
  _ltoa( err, (uint8*)&buf[13], 10 );

  HalLcdWriteString( (char*)buf, 1 );

#endif

}




/*********************************************************************
 * @fn      Board_openLCD
 *
 * @brief   Open LCD peripheral on SRF06EB.
 *
 * @param   none
 *
 * @return  void
 */
void Board_openLCD(void)
{
#ifdef TI_DRIVERS_LCD_INCLUDED
    HalLcd_HW_Init();
#endif
}

/*********************************************************************
 * @fn      Board_writeString
 *
 * @brief   Write a string on the LCD display.
 *
 * @param   str - string to print
 * @param   line - line (page) to write (0-7)
 *
 * @return  void
 */
void Board_writeString(char *str, uint8_t line)
{
#ifdef TI_DRIVERS_LCD_INCLUDED
  HalLcdWriteString( (char*)str, line );
#endif
}

/*********************************************************************
 * @fn      Board_writeStringValue
 *
 * @brief   Write a string and value on the LCD display.
 *
 * @param   str - string to print
 * @param   value - value to print
 * @param   format - base of the value to print (2,8,16 etc)
 * @param   line - line (page) to write (0-7)
 *
 * @return  void
 */
void Board_writeStringValue(char *str, uint32_t value, uint8_t format,
                            uint8_t line)
{
#ifdef TI_DRIVERS_LCD_INCLUDED
  HalLcdWriteStringValue( str, value, format, line );
#endif
}
#else
// LCD parameter
static LCD_Handle lcdHandle = NULL;

#ifdef TI_DRIVERS_LCD_INCLUDED
// LCD pin table
PIN_Config LCDPinTable[] = {
    Board_3V3_EN     | PIN_GPIO_OUTPUT_EN | PIN_GPIO_HIGH  | PIN_PUSHPULL,  // Enable 3V3 domain. Need to be high for LCD to work.
    PIN_TERMINATE                                                           // Terminate list
};

// LCD pin state
PIN_State LCDPinState;

// LCD pin handle
PIN_Handle hLCDPins;
#endif //TI_DRIVERS_LCD_INCLUDED

Char lcdBuffer0[LCD_BYTES] = {0};

LCD_Buffer lcdBuffers[] = {
      {lcdBuffer0, LCD_BYTES, NULL},
  };
  
/*********************************************************************
 * PUBLIC FUNCTIONS
 */

/*********************************************************************
 * @fn      Board_openLCD
 *
 * @brief   Open LCD peripheral on SRF06EB.
 *
 * @param   none
 *
 * @return  void
 */
void Board_openLCD(void)
{
#ifdef TI_DRIVERS_LCD_INCLUDED
  //Enable the 3V3 demain for the LCD
  hLCDPins = PIN_open(&LCDPinState, LCDPinTable);
    
  LCD_Params lcdParams;
  
  LCD_Params_init(&lcdParams);
  
  // Open LCD peripheral
  lcdHandle = LCD_open(&lcdBuffers[0], 1, &lcdParams);
  
  LCD_bufferClear(lcdHandle, 0);
  LCD_update(lcdHandle, 0);
#endif
}

/*********************************************************************
 * @fn      Board_writeString
 *
 * @brief   Write a string on the LCD display.
 *
 * @param   str - string to print
 * @param   line - line (page) to write (0-7)
 *
 * @return  void
 */
void Board_writeString(char *str, uint8_t line)
{
  if (lcdHandle != NULL)
  {
    LCD_bufferClearPage(lcdHandle, 0, (LCD_Page)line);
    LCD_bufferPrintString(lcdHandle, 0, str, 0, (LCD_Page)line);
    LCD_update(lcdHandle, 0);
  }
}

/*********************************************************************
 * @fn      Board_writeStringValue
 *
 * @brief   Write a string and value on the LCD display.
 *
 * @param   str - string to print
 * @param   value - value to print
 * @param   format - base of the value to print (2,8,16 etc)
 * @param   line - line (page) to write (0-7)
 *
 * @return  void
 */
void Board_writeStringValue(char *str, uint32_t value, uint8_t format,
                            uint8_t line)
{
  if (lcdHandle != NULL)
  {
    // Write string and 32-bit number
    LCD_writeLine(lcdHandle, 0, str, value, format, line);
  }
}
#endif
/*********************************************************************
*********************************************************************/

使用amo编写的驱动。

3、添加测试代码（SimpleBLECentral.c的SimpleBLECentral_Init函数中）

  //香瓜LCD初始化
  Board_writeString("Name:GUA", LCD_PAGE6);
  Board_writeStringValue("Age:", 27, 10, LCD_PAGE7);

简单使用两个最常用的LCD显示函数，一个用于纯字符串打印，一个用于字符串与数据相结合。

五、实验结果

如上图，显示屏一共有8行，上面三行是工程中自己添加的显示，而下面两行则是香瓜在初始化时添加的测试代码。

因此，实验成功。

甜甜的大香瓜

关注

1
点赞
踩
2

收藏

觉得还不错? 一键收藏
0
评论
复制链接

分享到 QQ

分享到新浪微博

扫一扫

专栏目录