MC-LAG情况下,MA网络,怎么设计ospf
因为DR/BDR选举完之后,有邻居卡在了exstart状态
拓扑MC-LAG上 .2 .3 对端 .4 , svi跑ospf
解答:利用L3 Peer router
ospf over peer-link will decrease ttl value to 0. so it will drop.
then you have to keep this value eq 1. cuz,you have to .
so under vpc domain section, type l3-peer-router func, vpc peerlink will remain the hello packet with ttl=1.
这是仅存在于vpc类似的环境里的。、
另外,运营商盒子的和IOS XE ASR1K 。都有类似的interchaiss的config, 但是逻辑上是否等同VPC还有待论证。
参考链接
https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/BRKDCN-2378.pdf
但是MC-LAG + OSPF 这不是建议设计。所以生产中别碰这个东西。他只是考试为了难度!!!right~~
而且。。。。这东西基本上一问一个死
大部分人说啊!!!我卡在了exstart ,是MTU问题,No,No, 完全不是。