4.1 Function Calls during Start-up
The first BSW module to be initialized after Power on shall be MCU. The MCU shall be initialized in the following
sequence.
1. Mcu_Init()
2. Mcu_InitClock()
3. Mcu_GetPllStatus() - Till PLL is locked.
4. Mcu_DistributePllClock()
5. Mcu_SetMode()
6. Mcu_InitRamSection() - If required
4.2 Function Calls during Shutdown
Mcu_SetMode (sleep mode) API shall be called
during GO SLEEP phase of the EcuM'sShutdown state to configure the hardware for Sleep mode.
This shall be called after ICU & GPT are set to sleep.