static int __init usbtouch_init(void) //入口函数
{
return usb_register(&usbtouch_driver); //注册usb触摸屏驱动
}
module_init(usbtouch_init);
看usbtouch_driver的定义
static struct usb_driver usbtouch_driver = {
.name = "usbtouchscreen",
.probe = usbtouch_probe, //usb触摸屏探测到
.disconnect = usbtouch_disconnect,
.suspend = usbtouch_suspend,
.resume = usbtouch_resume,
.reset_resume = usbtouch_reset_resume,
.id_table = usbtouch_devices,
.supports_autosuspend = 1,
};
当有设备匹配的时候会调用probe方法,也就是usbtouch_probe
在static const struct usb_device_id usbtouch_devices[]中定义了的usb设备插入就会匹配并触发probe
可以用宏USB_DEVICE简化设置usb设备id信息,如下:
{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
driver_info是驱动类型,有一下选择
enum {
DEVTYPE_IGNORE = -1,
DEVTYPE_EGALAX,
DEVTYPE_PANJIT,
DEVTYPE_3M,
DEVTYPE_ITM,
DEVTYPE_ETURBO,
DEVTYPE_GUNZE,
DEVTYPE_DMC_TSC10,
DEVTYPE_IRTOUCH,
DEVTYPE_IDEALTEK,
DEVTYPE_GENERAL_TOUCH,
DEVTYPE_GOTOP,
DEVTYPE_JASTEC,
DEVTYPE_E2I,
DEVTYPE_ZYTRONIC,
DEVTYPE_TC45USB,
DEVTYPE_NEXIO,
};
没有选择也可以自己添加一个在枚举体后面
(0x3823,0x0001)这两个分别是usb设备的厂商id和产品id
下面代码是我插拔usb触摸屏的打印信息
usb 1-1.1: new full speed USB device using musb-hdrc and address 9
usb 1-1.1: New USB device found, idVendor=0408, idProduct=3001
usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.1: Product: HCTouch
usb 1-1.1: Manufacturer: HC
input: HC HCTouch as /devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
input: HC HCTouch as /devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input7
作为我的设备,我就把idVendor=0408, idProduct=3001添加进USB_DEVICE宏就行
{USB_DEVICE(0x0408, 0x3001), .driver_info = DEVTYPE_HCTOUCH},
OK!插上设备就会匹配的
input: HC HCTouch as /devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
input: HC HCTouch as /devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input7
这个就是匹配后的打印信息
接着就是probe方法了
static int usbtouch_probe(struct usb_interface *intf,const struct usb_device_id *id)
{
struct usbtouch_usb *usbtouch;
struct input_dev *input_dev;
struct usb_endpoint_descriptor *endpoint;
struct usb_device *udev = interface_to_usbdev(intf);
struct usbtouch_device_info *type;
int err = -ENOMEM;
/* some devices are ignored */
if (id->driver_info == DEVTYPE_IGNORE) //忽略的设备类型
return -ENODEV;
endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting); //获取端点描述符数组指针
if (!endpoint)
return -ENXIO;
usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL); //分配usbtouch_usb结构体对象内存
input_dev = input_allocate_device(); //分配输入设备对象内存
if (!usbtouch || !input_dev) //分配不成功退出
goto out_free;
type = &usbtouch_dev_info[id->driver_info]; //根据id的driver_info信息获取全局usbtouch_dev_info数组项
usbtouch->type = type; //指定usbtouch_dev_info
if (!type->process_pkt) //若usbtouch_dev_info不存在process_pkt方法
type->process_pkt = usbtouch_process_pkt; //则默认设置为usbtouch_process_pkt
usbtouch->data = usb_alloc_coherent(udev, type->rept_size,GFP_KERNEL, &usbtouch->data_dma); //分配缓冲区
if (!usbtouch->data)
goto out_free;
if (type->get_pkt_len) { //若usbtouch_dev_info存在get_pkt_len方法
usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL); //则要根据rept_size分配usb_touch_usb对象缓冲区
if (!usbtouch->buffer)
goto out_free_buffers;
}
usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL); //分配urb
if (!usbtouch->irq) {
dbg("%s - usb_alloc_urb failed: usbtouch->irq", __func__);
goto out_free_buffers;
}
usbtouch->interface = intf; //设置usb_touch_usb的usb接口
usbtouch->input = input_dev;//捆绑usb_touch_usb和输入设备
if (udev->manufacturer) //存在工厂名则设置工厂名
strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
if (udev->product) { //存在产品名则设置产品名
if (udev->manufacturer)
strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
}
if (!strlen(usbtouch->name)) //若不存在工厂名和产品名
snprintf(usbtouch->name, sizeof(usbtouch->name),
"USB Touchscreen %04x:%04x",
le16_to_cpu(udev->descriptor.idVendor),
le16_to_cpu(udev->descriptor.idProduct));
usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys)); //设置usb设备路径
strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
input_dev->name = usbtouch->name; //设置输入设备名
input_dev->phys = usbtouch->phys; //设置输入设备路径
usb_to_input_id(udev, &input_dev->id);
input_dev->dev.parent = &intf->dev; //设置usb设备为输入设备的父设备
input_set_drvdata(input_dev, usbtouch);
input_dev->open = usbtouch_open; //设置输入设备的open方法
input_dev->close = usbtouch_close; //设置输入设备的close方法
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); //按键和绝对位移事件
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH); //触摸按键
input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0); //绝对x坐标位移
input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0); //绝对y坐标位移
if (type->max_press)
input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,type->max_press, 0, 0);
if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT) //中断传输方式
usb_fill_int_urb(usbtouch->irq, udev,
usb_rcvintpipe(udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch, endpoint->bInterval);
else //bulk传输方式
usb_fill_bulk_urb(usbtouch->irq, udev,
usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
usbtouch_irq, usbtouch);
usbtouch->irq->dev = udev; //urb和usb设备捆绑
usbtouch->irq->transfer_dma = usbtouch->data_dma; //传输数据dma地址缓冲区
usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; //传输标志物dma映射传输
/* device specific allocations */
if (type->alloc) { //usbtouch_dev_info对象存在alloc方法
err = type->alloc(usbtouch); //则调用该方法
if (err) {
dbg("%s - type->alloc() failed, err: %d", __func__, err);
goto out_free_urb;
}
}
/* device specific initialisation*/
if (type->init) { //usbtouch_dev_info对象存在初始化方法
err = type->init(usbtouch); //则调用该初始化方法
if (err) {
dbg("%s - type->init() failed, err: %d", __func__, err);
goto out_do_exit;
}
}
err = input_register_device(usbtouch->input); //注册输入设备
if (err) {
dbg("%s - input_register_device failed, err: %d", __func__, err);
goto out_do_exit;
}
usb_set_intfdata(intf, usbtouch);
if (usbtouch->type->irq_always) { //usbtouch_dev_info对象存在irq_always方法
/* this can't fail */
usb_autopm_get_interface(intf); //电源唤醒
err = usb_submit_urb(usbtouch->irq, GFP_KERNEL); //提交urb
if (err) {
usb_autopm_put_interface(intf); //电源挂起
err("%s - usb_submit_urb failed with result: %d",
__func__, err);
goto out_unregister_input;
}
}
return 0;
out_unregister_input:
input_unregister_device(input_dev);
input_dev = NULL;
out_do_exit:
if (type->exit)
type->exit(usbtouch);
out_free_urb:
usb_free_urb(usbtouch->irq);
out_free_buffers:
usbtouch_free_buffers(udev, usbtouch);
out_free:
input_free_device(input_dev);
kfree(usbtouch);
return err;
}
错中复杂的关系不用管,关键是
1.type = &usbtouch_dev_info[id->driver_info]; //根据id的driver_info信息获取全局usbtouch_dev_info数组项
2.if (!type->process_pkt) //若usbtouch_dev_info不存在process_pkt方法
type->process_pkt = usbtouch_process_pkt; //则默认设置为usbtouch_process_pkt
3.申请的urb的回调函数是usbtouch_irq
4.if (type->init) { //usbtouch_dev_info对象存在初始化方法
err = type->init(usbtouch); //则调用该初始化方法
usbtouch_dev_info是全局usbtouch_device_info数组
static struct usbtouch_device_info usbtouch_dev_info[] = {
#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
[DEVTYPE_EGALAX] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
.min_yc = 0x0,
.max_yc = 0x07ff,
.rept_size = 16,
.process_pkt = usbtouch_process_multi,
.get_pkt_len = egalax_get_pkt_len,
.read_data = egalax_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
[DEVTYPE_PANJIT] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.read_data = panjit_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_3M
[DEVTYPE_3M] = {
.min_xc = 0x0,
.max_xc = 0x4000,
.min_yc = 0x0,
.max_yc = 0x4000,
.rept_size = 11,
.read_data = mtouch_read_data,
.init = mtouch_init,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
[DEVTYPE_ITM] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.max_press = 0xff,
.rept_size = 8,
.read_data = itm_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
[DEVTYPE_ETURBO] = {
.min_xc = 0x0,
.max_xc = 0x07ff,
.min_yc = 0x0,
.max_yc = 0x07ff,
.rept_size = 8,
.process_pkt = usbtouch_process_multi,
.get_pkt_len = eturbo_get_pkt_len,
.read_data = eturbo_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
[DEVTYPE_GUNZE] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 4,
.read_data = gunze_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
[DEVTYPE_DMC_TSC10] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 5,
.init = dmc_tsc10_init,
.read_data = dmc_tsc10_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
[DEVTYPE_IRTOUCH] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.read_data = irtouch_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
[DEVTYPE_IDEALTEK] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 8,
.process_pkt = usbtouch_process_multi,
.get_pkt_len = idealtek_get_pkt_len,
.read_data = idealtek_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
[DEVTYPE_GENERAL_TOUCH] = {
.min_xc = 0x0,
.max_xc = 0x7fff,
.min_yc = 0x0,
.max_yc = 0x7fff,
.rept_size = 7,
.read_data = general_touch_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
[DEVTYPE_GOTOP] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 4,
.read_data = gotop_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
[DEVTYPE_JASTEC] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 4,
.read_data = jastec_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_E2I
[DEVTYPE_E2I] = {
.min_xc = 0x0,
.max_xc = 0x7fff,
.min_yc = 0x0,
.max_yc = 0x7fff,
.rept_size = 6,
.init = e2i_init,
.read_data = e2i_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
[DEVTYPE_ZYTRONIC] = {
.min_xc = 0x0,
.max_xc = 0x03ff,
.min_yc = 0x0,
.max_yc = 0x03ff,
.rept_size = 5,
.read_data = zytronic_read_data,
.irq_always = true,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
[DEVTYPE_TC45USB] = {
.min_xc = 0x0,
.max_xc = 0x0fff,
.min_yc = 0x0,
.max_yc = 0x0fff,
.rept_size = 5,
.read_data = tc45usb_read_data,
},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
[DEVTYPE_NEXIO] = {
.rept_size = 1024,
.irq_always = true,
.read_data = nexio_read_data,
.alloc = nexio_alloc,
.init = nexio_init,
.exit = nexio_exit,
},
#endif
};
由于我DIY了一个,所以后面要添加
[DEVTYPE_HCTOUCH] = {
.min_xc = 0x0, //最小x坐标
.max_xc = 0x7fff, //最大x坐标
.min_yc = 0x0, //最小y坐标
.max_yc = 0x7fff, //最大y坐标
.rept_size = 7, //还不知道是干嘛用的
.read_data = hc_touch_read_data, //关键的读数据方法
},
当触摸屏幕的时候,usb会通过urb传递数据,紧接着肯定会调用usbtouch_irq啦
static void usbtouch_irq(struct urb *urb)
{
struct usbtouch_usb *usbtouch = urb->context;
int retval;
switch (urb->status) {
case 0: //正常流程跳出switch语句
/* success */
break;
case -ETIME:
/* this urb is timing out */
dbg("%s - urb timed out - was the device unplugged?",
__func__);
return;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
case -EPIPE:
/* this urb is terminated, clean up */
dbg("%s - urb shutting down with status: %d",
__func__, urb->status);
return;
default:
dbg("%s - nonzero urb status received: %d",
__func__, urb->status);
goto exit;
}
//执行usbtouch_device_info对象的process_pkt方法
usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
exit:
usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval)
err("%s - usb_submit_urb failed with result: %d",
__func__, retval);
}
这里的关键是会调用process_pkt方法也就是默认的usbtouch_process_pkt函数
static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,unsigned char *pkt, int len) //默认的usb触摸数据包处理函数
{
struct usbtouch_device_info *type = usbtouch->type; //获取usbtouch_device_info对象
if (!type->read_data(usbtouch, pkt)) //调用usbtouch_device_info对象的read_data方法
return;
input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch); //上报触摸事件
if (swap_xy) { //竖屏模式
input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
} else {
input_report_abs(usbtouch->input, ABS_X, usbtouch->x); //上报绝对坐标X事件
input_report_abs(usbtouch->input, ABS_Y, usbtouch->y); //上报绝对坐标Y事件
}
if (type->max_press)
input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
input_sync(usbtouch->input); //同步输入事件
}
这个函数主要是调用了usbtouch_device_info对象的read_data方法也就是上面提到的数组的read_data方法(hc_touch_read_data)
数据读取完毕后上报触摸事件,绝对XY坐标事件,然后同步交由输入子系统去处理坐标等具体事项
hc_touch_read_data函数读取usb接口传递过来的数据,该数据就包含了坐标和触摸信息,函数主要是对这些信息做下运算处理
static int hc_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
{
dev->x = (pkt[2] << 8) | pkt[1];
dev->y = (pkt[4] << 8) | pkt[3];
dev->press = pkt[5] & 0xff;
dev->touch = pkt[0] & 0x01;
return 1;
}
这些处理的细节跟具体硬件厂商或者协议有关,调试可以将dev->x和dev->y打印出来
可能你加了打印之后触摸屏幕压根就没有打印信息
那是因为要打开设备,所以应用层也要有测试软件,有界面的测试软件最好
没有也可以用下面这段代码去简单测试一下(来着网络)
#include <stdio.h>
#include <linux/input.h>
static int event0_fd = -1;
struct input_event ev0[64];
static int handle_event0()
{
int button = 0, realx=0, realy=0, i, rd;
rd = read(event0_fd, ev0, sizeof(struct input_event)* 64);
if(rd < sizeof(struct input_event)) return 0;
for(i=0;i<rd/sizeof(struct input_event); i++)
{
if(EV_ABS == ev0[i].type)
{
if(ev0[i].code == 0) {
realx = ev0[i].value;
} else if(ev0[i].code == 1) {
realy = ev0[i].value;
}
}
printf("realx:%3d; realy:%3d\n",realx,realy);
//printf("event(%d):type:%d; code:%3d; value:%3d; realx:%3d; realy:%3d\n",i,ev0[i].type,ev0[i].code,ev0[i].value,realx,realy);
}
return 1;
}
int main(void)
{
int done = 1;
event0_fd = open("/dev/input/event1",02); //打开设备
if(event0_fd <0) {
printf("open input device error\n");
return -1;
}
while (done)
{
//printf("begin handle_event0...\n");
done = handle_event0();
//printf("end handle_event0...\n");
}
if(event0_fd > 0)
{
close(event0_fd);
event0_fd = -1;
}
return 0;
}
这段代码打开的设备修改成你的设备路径,插拔触摸屏判断哪个是你触摸屏的设备
或者ls -l /sys/class/input看信息结合插入设备的打印信息也可以判断你的设备是哪个
lrwxrwxrwx 1 root root 0 Mar 23 17:20 event0 -> ../../devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6/event0
lrwxrwxrwx 1 root root 0 Mar 23 17:20 event1 -> ../../devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input7/event1
lrwxrwxrwx 1 root root 0 Mar 23 17:20 event2 -> ../../devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input8/event2
再或者cat /proc/bus/input/devices也可以
I: Bus=0003 Vendor=0408 Product=3001 Version=0200
N: Name="HC HCTouch "
P: Phys=usb-musb-hdrc.0-1.1/input0
S: Sysfs=/devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input6
U: Uniq=
H: Handlers=mouse0 event0
B: EV=b
B: KEY=400 0 0 0 0 0 0 0 0 0 0
B: ABS=3
I: Bus=0003 Vendor=0408 Product=3001 Version=0200
N: Name="HC HCTouch "
P: Phys=usb-musb-hdrc.0-1.1/input0
S: Sysfs=/devices/platform/omap/ti81xx-usbss/musb-hdrc.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input7
U: Uniq=
H: Handlers=mouse1 event1
B: EV=b
B: KEY=400 0 0 0 0 0 0 0 0 0 0
B: ABS=3
这里我的设备有两个input是因为我是2点的屏
还有一点要补充就是关于内核编译选项的
Device Drivers --->Input device support --->
[*] Touchscreens --->
<*> USB Touchscreen Driver 这个要选择
[*] HID Devices ---> <*> USB Human Interface Device (full HID) support 选中