STM32 ADC 解读

 

（1）启动停止

The ADC can be powered-on by setting the ADON bit in the ADC_CR2 register.

When the ADON bit is set for the first time, it wakes up the ADC from Power Down mode

Conversion starts when ADON bit is set for a second time by software after ADC power-up
time (tSTAB).（相当于第一次置位ADON是power on  adc module,第二次置位ADON才是启动ADC转换）
reset ADON bit 就停止ADC功能，停止后功耗很低，几个微安。

（2）时钟

ADC clock 来自PCLK2,（APB2）, RCC controller 有专用的ADC prescaler

（3）通道

16路multiplexed channels

AD转换分为2组类别：regular group  and injected group<转换先后顺序、转换数量设定>

regular group 由最多16个conversions组成，their order in the conversion sequence must be selected in the ADC_SQRx registers

The total number of conversions in the regular group must be written in the L[3:0] bits inthe ADC_SQR1 register

i