第七次作业

• 实验拓扑与要求

二、实验思路

先根据题意判断哪些是untagged,其中LSW1的G0/0/4接口vlan3 to 6配置为untageed,因为物理口不识别带标签的数据帧，子接口可以识别带标签的数据帧，根据网段划分只有一个子接口，只能封装一个vlan（vlan2），然后配置接口类型及pvid,最后配置R1的端口IP地址及DHCP

三、具体命令

1.配置vlan及接口类型

[LSW1]int g0/0/1

[LSW1-GigabitEthernet0/0/1]port link-type access

[LSW1-GigabitEthernet0/0/1]port default vlan 2

[LSW1-GigabitEthernet0/0/1]int g0/0/2

[LSW1-GigabitEthernet0/0/2]port hybrid pvid vlan 3

[LSW1-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6

[LSW1-GigabitEthernet0/0/2]int g0/0/3

[LSW1-GigabitEthernet0/0/3]port link-type trunk

[LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6

[LSW1]int g0/0/4

[LSW1-GigabitEthernet0/0/4]port hybrid  untagged vlan 3 to 6

[LSW2]vlan batch 2  to 6

Info: This operation may take a few seconds. Please wait for a moment...done.

[LSW2]int g0/0/1

[LSW2-GigabitEthernet0/0/1]port link-type access

[LSW2-GigabitEthernet0/0/1]port default vlan 2

[LSW2-GigabitEthernet0/0/1]int g0/0/2

[LSW2-GigabitEthernet0/0/2]port hybrid untagged vlan 3 to 6

[LSW2-GigabitEthernet0/0/2]int g0/0/3

[LSW2-GigabitEthernet0/0/3]port link-type trunk

[LSW2-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6

[LSW2-GigabitEthernet0/0/3]int g0/0/4

[LSW2-GigabitEthernet0/0/4]port link-type trunk

[LSW2-GigabitEthernet0/0/4]port trunk allow-pass vlan 2 to 6

[LSW3]vlan ba 2 to 6

Info: This operation may take a few seconds. Please wait for a moment...done.

[LSW3]int g0/0/1

[LSW3-GigabitEthernet0/0/1]port hybrid  untagged  vlan 3 to 5

[LSW3-GigabitEthernet0/0/1]int g0/0/2

[LSW3-GigabitEthernet0/0/2]port hybrid untagged vlan 3 4 6

[LSW3-GigabitEthernet0/0/2]int g0/0/3

[LSW3-GigabitEthernet0/0/3]port link-type trunk

[LSW3-GigabitEthernet0/0/3]port trunk allow-pass vlan 2 to 6

2.配置R1的物理口和子接口IP地址

[R1]int g0/0/0

[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 24

[R1-GigabitEthernet0/0/0]int g0/0/0.1

[R1-GigabitEthernet0/0/0.1]ip address 192.168.2.1 24

[R1-GigabitEthernet0/0/0.1]dot1q termination vid 2

[R1-GigabitEthernet0/0/0.1]arp broadcast enable

3.配置DHCP

[R1]dhcp enable

Info: The operation may take a few seconds. Please wait for a moment.done.

[R1]ip pool aa

Info: It's successful to create an IP address pool.

[R1-ip-pool-aa]network 192.168.1.0 mask 24

[R1-ip-pool-aa]gateway-list 192.168.1.1

[R1-ip-pool-aa]dns-list 8.8.8.8

[R1-ip-pool-aa]q

[R1]int g0/0/0

[R1-GigabitEthernet0/0/0]dhcp select global

[R1]ip pool bb

Info: It's successful to create an IP address pool.

[R1-ip-pool-bb]network 192.168.2.0 mask 24

[R1-ip-pool-bb]gateway-list 192.168.2.1

[R1-ip-pool-bb]dns-list 8.8.8.8

[R1-ip-pool-bb]q

[R1]int g0/0/0.1

[R1-GigabitEthernet0/0/0.1]dhcp select global​​​​