STM32串口通信入门

1.创建工程

1.1设置RCC

1.2时钟树的配置

1.3配置串口中断

然后生成工程

2.编写程序

2.1在main.c文件的主函数while循环中添加以下代码：

HAL_UART_Transmit(&huart1, (uint8_t *)"hello windows!\r\n", 16 , 0xffff);
HAL_Delay(1000);  

2.2在main中，改为一下代码：

    uint8_t receivedChar;  
    if (HAL_UART_Receive(&huart1, &receivedChar, 1, 0xffff) == HAL_OK) 
			{  
      switch (receivedChar) 
			{  
        case '#': // Pause sending message  
					HAL_UART_Transmit(&huart1, (uint8_t *)"stop", 16 , 0xffff);
          break;  
        case '*': // Resume sending message  
          HAL_UART_Transmit(&huart1, (uint8_t *)"hello windows!\r\n", 16 , 0xffff);  
          HAL_Delay(1000); //??1s  
          break;  
        default: // Continue sending message  
          HAL_UART_Transmit(&huart1, (uint8_t *)"hello windows!\r\n", 16 , 0xffff);  
          HAL_Delay(1000); //??1s  
          break;  
      }  
    }  

3.结果