该篇文章详细描述了五个路由器(R1-R5)的ospf配置，包括路由器ID、网络区域、接口IP地址以及DR(Priority)的设置，展示了ospf在企业网络中的基本配置过程。
[R1]interface g0/0/0
[R1-GigabitEthernet0/0/0]ip address 192.168.1.1 27
[R1]interface LoopBack 0
[R1-LoopBack0]ip address 192.168.1.161 32
[R1]ospf 1 router-id 1.1.1.1
[R1-ospf-1]area 0
[R1-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.0
[R1]interface G0/0/0
[R1-GigabitEthernet0/0/0]ospf dr-priority 10
[R2]interface G0/0/0
[R2-GigabitEthernet0/0/0]IP address 192.168.1.33 27
[R2]interface LoopBack 0
[R2-LoopBack0]ip address 192.168.1.193 32
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 192.168.1.33 0.0.0.0
[R2]interface g0/0/0
[R2-GigabitEthernet0/0/0]ospf dr-priority 9
[R3]interface g0/0/0
[R3-GigabitEthernet0/0/0]ip address 192.168.1.65 27
[R3]interface g0/0/1
[R3-GigabitEthernet0/0/1]ip address 192.168.1.97 27
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 192.168.1.65 0.0.0.0
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 1
[R3-ospf-1-area-0.0.0.1]network 192.168.1.97 0.0.0.0
[R4]interface g0/0/0
[R4-GigabitEthernet0/0/0]ip address 192.168.1.98 27
[R4]interface g0/0/1
[R4-GigabitEthernet0/0/1]ip address 192.168.1.129 27
[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]area 1
[R4-ospf-1-area-0.0.0.1]network 192.168.1.98 0.0.0.0
[R4-ospf-1-area-0.0.0.1]network 192.168.1.129 0.0.0.0
[R5]interface g0/0/0
[R5-GigabitEthernet0/0/0]ip address 192.168.1.130 27
[R5]interface LoopBack 0
[R5-LoopBack0]ip address 192.168.1.225 32
[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 1
[R5-ospf-1-area-0.0.0.1]network 192.168.1.130 0.0.0.0
[R5-ospf-1]default-route-advertise
1346
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
