第九章、NAT技术实验报告

一、实验拓扑

二、实验要求

  1.按照图示配置 IP地址,公网地址100.1.1.1/24
  2.私网 A 通过NAPT,使R1接入到互联网，私网8通过 EASY IP,使R3接入到互联网
  3.私网 A 配图 NAT SERVER 把 Telnet 的 Telnet 服务发布到公网，使PC2可以访问

三、实验操作和测试截图

    telent配置
[telent]int g0/0/0
[telent-GigabitEthernet0/0/0]
[telent-GigabitEthernet0/0/0]ip add 192.168.1.2 24
[telent-GigabitEthernet0/0/0]quit     
[telent]ip route-static 0.0.0.0 0 192.168.1.254
[telent]

[telent]aaa    
[telent-aaa]local-user wangdaye privilege level 15 password cipher wdy12345.
[telent-aaa]    
[telent-aaa]local-user wangdaye service-type telnet    
[telent-aaa]quit 
[telent]
[telent-ui-vty0-4]authentication-mode aaa
[telent-ui-vty0-4]quit 
[telent]

R1配置

[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]ip add 192.168.1.254 24
[R1-GigabitEthernet0/0/0]
[R1-GigabitEthernet0/0/0]int g0/0/1
[R1-GigabitEthernet0/0/1]ip add 100.1.1.1 24

[R1]ip route-static 0.0.0.0 0 100.1.1.2

[R1]
[R1]acl 2000
[R1-acl-basic-2000]    
[R1-acl-basic-2000]rule  permit source 192.168.1.0 0.0.0.255
[R1-acl-basic-2000]quit 
[R1]    
[R1]nat address-group 1 100.1.1.3 100.1.1.254    
[R1]interface g0/0/1
[R1-GigabitEthernet0/0/1]nat outbound 2000 address-group 1
[R1-GigabitEthernet0/0/1]

[R1]int g0/0/1
[R1-GigabitEthernet0/0/1]nat server protocol tcp global current-interface 23 ins
ide 192.168.1.2 23
Are you sure to continue?[Y/N]:y

R2配置
[R2]int g0/0/0
[R2-GigabitEthernet0/0/0]ip add 100.1.1.2 24
[R2-GigabitEthernet0/0/0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 100.2.2.2 24

R3配置

[R3]int g0/0/0
[R3-GigabitEthernet0/0/0]ip add 100.2.2.3 24
[R3-GigabitEthernet0/0/0]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 192.168.1.2 24
[R3]int g0/0/1
[R3-GigabitEthernet0/0/1]ip add 192.168.1.3 24
[R3-GigabitEthernet0/0/1]quit 
[R3]ip 
[R3]ip route-static 0.0.0.0 0 100.2.2.2

[R3]acl 2000    
[R3-acl-basic-2000]rule permit source 192.168.1.0 0.0.0.255
[R3-acl-basic-2000]quit 
[R3]
[R3]int g0/0/0    
[R3-GigabitEthernet0/0/0]nat outbound 2000
[R3-GigabitEthernet0/0/0]

PC2配置

[PC2]int g0/0/0
[PC2-GigabitEthernet0/0/0]ip add 192.168.1.1 24
[PC2-GigabitEthernet0/0/0]quit 
[PC2]
[PC2]ip 
[PC2]ip route-static 0.0.0.0 0 192.168.1.3

实验测试截图

最后能够实现使PC2访问到私网A