MPSOC VCU开发过程中的注意点
alvin.lu@avnet.com
2020.09.12
软件平台:
Vivado 2019.1
PetaLinux 2019.1
Ubuntu16.04.6真机
硬件平台:
ZCU106 (ZynqMP)
1. AVC minimum picture resolution: 80×96; HEVC minimum picture resolution: 128×128.
2. Progressive support for H.264 and H.265;Interlace support for H.265.
3. 4k (3840x2160) and below resolutions aresupported in all speedgrades. However, 4K UHD (4096x2160) requires -2 or -3 speedgrade.
4. Number of Slices : More than 16 slices will not bring much benefit in low latency mode because of overhead.
5. GOP MODE : PG252 P124.
6. AR# 72324 : 2019.1 - Zynq UltraScale+ MPSoC VCU – Patches for petalinux.
7. prefetch-buffer=true means L2 cache enable.
8. XV20 when using 4:2:2 10-bit NV12 when using 4:2:0 8-bit.
9. The VCU core reset can be released after PL is fully configured.
10. VCU operation requires at least 1000 MB of CMA. So user can set uboot env as “cma=1XXXM”
11. Interlaced mode is only supported for H.265/HEVC on the VCU.