stm32的adc采样实验 库函数实现

 接线：PA1接地和3.3v

#include "led.h"
#include "delay.h"
#include "key.h"
#include "sys.h"
#include "lcd.h"
#include "usart.h"	 
#include "adc.h"
 

   
 int main(void)
 {	 
  u16 adcx;
	float temp;
	delay_init();	    	 //延时函数初始化	  
	NVIC_PriorityGroupConfig(NVIC_PriorityGroup_2);//设置中断优先级分组为组2：2位抢占优先级，2位响应优先级
	uart_init(115200);	 	//串口初始化为115200
 	LED_Init();			     //LED端口初始化
	LCD_Init();			 	
 	Adc_Init();		  		//ADC初始化

	POINT_COLOR=RED;//设置字体为红色 
	LCD_ShowString(60,50,200,16,16,"Elite STM32");	
	LCD_ShowString(60,70,200,16,16,"ADC TEST");	
	LCD_ShowString(60,90,200,16,16,"ATOM@ALIENTEK");
	LCD_ShowString(60,110,200,16,16,"2015/1/14");	
	//显示提示信息
	POINT_COLOR=BLUE;//设置字体为蓝色
	LCD_ShowString(60,130,200,16,16,"ADC_CH0_VAL:");	      
	LCD_ShowString(60,150,200,16,16,"ADC_CH0_VOL:0.000V");	       
	while(1)
	{
		adcx=Get_Adc_Average(ADC_Channel_1,10);
		LCD_ShowxNum(156,130,adcx,4,16,0);//显示ADC的值
		temp=(float)adcx*(3.3/4096);
		adcx=temp;
		LCD_ShowxNum(156,150,adcx,1,16,0);//显示电压值
		temp-=adcx;
		temp*=1000;
		LCD_ShowxNum(172,150,temp,3,16,0X80);
		LED0=!LED0;
		delay_ms(250);	
	}
 }