10届蓝桥杯单片机省赛

 

 

 

 

 

main.c

#include "sys.h"
#include "iic.h"

uint volt;
bit mode = 0;
void OperateDAC();
void Led();
void main()
{
	InitSystem();
	Timer0Init();
	Timer1Init();
	while(1)
	{
		OperateDAC();
		KeyScans();
		if(t500ms)
		{
			t500ms = 0;
			ReadAIN3();
			volt = rb2*1.96 + 0.2;
		}
		
		if(smg_k)
			DisplaySMG();
		else
		{
			P0 = 0X00;
			Select_74HC138(6);
			Select_74HC138(0);
		}
		if(led_k)
			Led();
		else
			OperateLed(0xff,1);
		
	}
}

void OperateDAC()
{
	if(mode == 0)
	{
		DAC_Out(102);
	}
	else if(mode == 1)
	{
		DAC_Out(volt);
	}
}

void Led()
{
	if(interface == 0)
		OperateLed(2,0);
	else
		OperateLed(2,1);
	if(interface == 1)
		OperateLed(1,0);
	else
		OperateLed(1,1);
	if(((volt >= 150) && (volt < 250)) || (volt >= 350))
		OperateLed(3,0);
	else
		OperateLed(3,1);
	if(((freq >= 1000) && (freq < 5000)) || (freq >= 10000))
		OperateLed(4,0);
	else
		OperateLed(4,1);
	if(mode == 1)
		OperateLed(5,0);
	else
		OperateLed(5,1);
}

sys.c

#include "sys.h"

void Select_74HC138(uchar channel)
{
	switch(channel)
	{
		case 0: P2 = P2 & 0X1F; break;
		case 4: P2 = (P2 & 0X1F) | 0X80; break;
		case 5: P2 = (P2 & 0X1F) | 0XA0; break;
		case 6: P2 = (P2 & 0X1F) | 0XC0; break;
		case 7: P2 = (P2 & 0X1F) | 0XE0; break;
	}
}

void InitSystem()
{
	Select_74HC138(4);
	P0 = 0XFF;
	Select_74HC138(5);
	P0 = 0X00;
	Select_74HC138(0);
}

void Delay(uint ms)
{
	uint i;
	for(ms; ms > 0; ms--)
		for(i = 921; i > 0; i--);
}

void OperateLed(uchar who,status)
{
	static uchar temp;
	uchar zt;
	switch(status)
	{
		case 0:
			temp = temp | _crol_(0x01,who-1);
			P0 = ~temp;
			break;
		case 1: 
			if(who == 0xff)
			{
				P0 = 0xff;
				temp = 0;
			}
			else
			{
				zt = (~temp) | _crol_(0x01,who-1);
				if(temp != (~zt))
					temp = ~zt;
				P0 = ~temp;
			}
			break;
		case 2:
			P0 = ~who;
			temp = who;
			break;
		default: break;
	}
	Select_74HC138(4);
	Select_74HC138(0);
}

uint freq_count;

void Timer0Init()
{
	AUXR |= 0X80;
	TMOD &= 0Xf0;
	TMOD |= 0X04;
	TH0 = 0XFF;
	TL0 = 0XFF;
	TF0 = 0;
	ET0 = 1;
	TR0 = 1;
	EA = 1;
}

void ServiceTimer0() interrupt 1
{
	freq_count++;
}

uchar t1;
uchar t500ms = 0;
void Timer1Init()		//50毫秒@12.000MHz
{
	AUXR &= 0xBF;		//定时器时钟12T模式
	TMOD &= 0x0F;		//设置定时器模式
	TL1 = 0xB0;		//设置定时初值
	TH1 = 0x3C;		//设置定时初值
	TF1 = 0;		//清除TF1标志
	TR1 = 1;		//定时器1开始计时
	ET1 = 1;
	EA = 1;
}

void ServiceTimer1() interrupt 3
{
	t1++;
	if(t1 % 10 == 0)
		t500ms = 1;
	if(t1 == 20)
	{
		t1 = 0;
		freq = freq_count;
		freq_count = 0;
	}
}

nixie.c

#include "sys.h"

uchar code nixie[] = {0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0x8e,0xc1,0xbf,0xff};

uint freq;
uchar interface = 0;
void DisplayBit(uchar pos,value,bit k)
{
	P0 = 0X00;
	Select_74HC138(6);
	Select_74HC138(0);
	
	if(k)
		P0 = nixie[value] & 0x7f;
	else
		P0 = nixie[value];
	Select_74HC138(7);
	Select_74HC138(0);
	
	P0 = _crol_(0x01,pos);
	Select_74HC138(6);
	Select_74HC138(0);
	
	Delay(1);
}

void DisplayFreq()
{
	DisplayBit(0,10,0);
	
	if(freq > 99999)
		DisplayBit(2,freq / 100000,0);
	if(freq > 9999)
		DisplayBit(3,freq / 10000 % 10,0);
	if(freq > 999)
		DisplayBit(4,freq / 1000 % 10,0);
	if(freq > 99)
		DisplayBit(5,freq / 100 % 10,0);
	if(freq > 9)
		DisplayBit(6,freq / 10 % 10,0);
	DisplayBit(7,freq % 10,0);
}

void DisplayVolt()
{
	DisplayBit(0,11,0);
	
	DisplayBit(5,volt / 100,1);
	DisplayBit(6,volt / 10 % 10,0);
	DisplayBit(7,volt % 10,0);
}

void DisplaySMG()
{
	switch(interface)
	{
		case 0: DisplayFreq(); break;
		case 1: DisplayVolt(); break;
	}
}

key.c

#include "sys.h"

bit led_k = 1;
bit smg_k = 1;

void KeyScans()
{
	if(s4 == 0)
	{
		Delay(10);
		interface = (interface + 1) % 2;
		if(interface == 0)
			mode = 0;
		while(s4 == 0)
		{
			DisplaySMG();
		}
	}
	if(s5 == 0)
	{
		Delay(10);
		mode = ~mode;
		while(s5 == 0)
		{
			DisplaySMG();
		}
	}
	if(s6 == 0)
	{
		Delay(10);
		led_k = ~led_k;
		while(s6 == 0)
		{
			DisplaySMG();
		}
	}
	if(s7 == 0)
	{
		Delay(10);
		smg_k = ~smg_k;
		while(s7 == 0)
		{
			DisplaySMG();
		}
	}
}

sys.h

#ifndef _SYS_H_
#define _SYS_H_

#include <STC15F2K60S2.H>
#include <intrins.h>

sbit s4 = P3^3;
sbit s5 = P3^2;
sbit s6 = P3^1;
sbit s7 = P3^0;

#define uchar unsigned char
#define uint unsigned int
	
extern unsigned int freq;
extern unsigned int volt;
extern unsigned char interface;
extern bit mode;
extern bit led_k,smg_k;
extern unsigned char t500ms;
	
//sys.c
void Select_74HC138(unsigned char channel);
void InitSystem();
void Delay(unsigned int ms);
void OperateLed(unsigned char who,status);
void Timer0Init();
void Timer1Init();

//nixie.c
void DisplayBit(unsigned char pos,value,bit k);
void DisplayFreq();
void DisplayVolt();
void DisplaySMG();

//key.c
void KeyScans();

#endif