小蜜蜂老师的PCF8591电压信号探测器

main.c

#include "sys.h"
#include "iic.h"
uint volt;
uchar k = 0;
uchar led1 = 0,led2 = 0,led3 = 0;
bit flag = 0;
bit l8;
void Function();
void main()
{
	InitSystem();
	Timer0Init();
	while(1)
	{
		KeyScans();
		ReadAIN3();
		volt = rb2*1.96+0.2;
		DisplaySMG();
		Function();
	}
}

void Function()
{
	if(volt < Vp)
	{
		TR0 = 1;
		k = 1;
		if(led1)
		{
			OperateLed(1,0);
		}
		if(led2)
		{
			OperateLed(2,0);
		}
		if(led3)
		{
			OperateLed(3,0);
		}
		if(l8)
			OperateLed(8,0);
		else
			OperateLed(8,1);
	}
	else
	{
		k = 0;
		TR0 = 0;
		count = 0;
		flag = 0;
		l8 = 0;
		t0 = 0;
		OperateLed(0xff,1);
		led1 = led2 = led3 = 0;
	}
}

 sys.c

#include "sys.h"

void Select_74HC138(uchar channel)
{
	switch(channel)
	{
		case 0: P2 = P2 & 0X1F; break;
		case 4: P2 = (P2 & 0X1F) | 0X80; break;
		case 5: P2 = (P2 & 0X1F) | 0XA0; break;
		case 6: P2 = (P2 & 0X1F) | 0XC0; break;
		case 7: P2 = (P2 & 0X1F) | 0XE0; break;
	}
}

void InitSystem()
{
	Select_74HC138(4);
	P0 = 0xff;
	Select_74HC138(5);
	P0 = 0x00;
	Select_74HC138(0);
}

void Delay(uint ms)
{
	uint i;
	for(ms; ms > 0; ms--)
		for(i = 921; i > 0; i--);
}

void OperateLed(uchar who,status)
{
	static uchar temp;
	uchar zt;
	switch(status)
	{
		case 0: 
			temp = temp | _crol_(0x01,who-1);
			P0 = ~temp;
			break;
		case 1:
			if(who == 0xff)
			{
				P0 = 0xff;
				temp = 0;
			}
			else
			{
				zt = (~temp) | _crol_(0x01,who-1);
				if(temp != (~zt))
					temp = ~zt;
				P0 = zt;
			}
			break;
		case 2: 
			P0 = ~who;
			temp = who;
			break;
		default: break;
	}
	Select_74HC138(4);
	Select_74HC138(0);
}

uint t0;
uint t;//led8闪烁标志
void Timer0Init(void)		//50毫秒@12.000MHz
{
	AUXR &= 0x7F;		//定时器时钟12T模式
	TMOD &= 0xF0;		//设置定时器模式
	TL0 = 0xB0;		//设置定时初值
	TH0 = 0x3C;		//设置定时初值
	TF0 = 0;		//清除TF0标志
	TR0 = 1;		//定时器0开始计时
	ET0 = 1;
	EA = 1;
}

void ServiceTimer0() interrupt 1
{
	if(k)
		t0++;
	if(t0 % 20 == 0)
	{
		count += 1;
	}
	if(t0 % 40 == 0)
	{
		led1 = 1;
	}
	if(t0 % 80 == 0)
	{
		led2 = 1;
	}
	if(t0 == 120)
	{
		t0 = 0;
		led3 = 1;
		flag = 1;
	}
	if(flag)
		t++;
	if(t == 20)
	{
		t = 0;
		l8 = ~l8;
	}
		
	if(count == 99)
		count = 99;
}

nixie.c

#include "sys.h"
#include "iic.h"
uchar code nixie[] = {0xc0,0xf9,0xa4,0xb0,0x99,0x92,0x82,0xf8,0x80,0x90,0xc1,0x8c,0x92,0xbf,0xff};
uint Vp = 300;
uchar count = 0;
uchar interface = 0;
void DisplayBit(uchar pos,value,bit k)
{
	P0 = 0x00;
	Select_74HC138(6);
	Select_74HC138(0);
	
	if(k)
		P0 = nixie[value] & 0x7f;
	else
		P0 = nixie[value];
	Select_74HC138(7);
	Select_74HC138(0);
	
	P0 = _crol_(0x01,pos);
	Select_74HC138(6);
	Select_74HC138(0);
	
	Delay(1);
}
void DisplayVolt()
{
	DisplayBit(0,10,0);
	DisplayBit(5,volt / 100,1);
	DisplayBit(6,volt / 10 % 10,0);
	DisplayBit(7,volt % 10,0);
}

void DisplayVp()
{
	DisplayBit(0,11,0);
	DisplayBit(5,Vp / 100,1);
	DisplayBit(6,Vp / 10 % 10,0);
	DisplayBit(7,Vp % 10,0);
}

void DisplayCount()
{
	DisplayBit(0,12,0);
	DisplayBit(6,count / 10,0);
	DisplayBit(7,count % 10,0);
}
void DisplaySMG()
{
	switch(interface)
	{
		case 0: DisplayVolt(); break;
		case 1: DisplayVp(); break;
		case 2: DisplayCount(); break;
	}
}

key.c

#include "sys.h"

void KeyScans()
{
	if(s4 == 0)
	{
		Delay(10);
		interface = (interface + 1) % 3;
		while(s4 == 0)
		{
			DisplaySMG();
		}
	}
	if(s5 == 0)
	{
		Delay(10);
		if(interface == 1)
		{
			Vp -= 50;
			if(Vp == -50)
				Vp = 500;
		}
		while(s5 == 0)
		{
			DisplaySMG();
		}
	}
	if(s6 == 0)
	{
		Delay(10);
		if(interface == 1)
		{
			Vp += 50;
			if(Vp == 550)
				Vp = 0;
		}
		while(s6 == 0)
		{
			DisplaySMG();
		}
	}
}

sys.h

#ifndef _SYS_H_
#define _SYS_H_
#include <STC15F2K60S2.H>
#include <intrins.h>
sbit s4 = P3^3;
sbit s5 = P3^2;
sbit s6 = P3^1;
#define uchar unsigned char
#define uint unsigned int
extern unsigned int volt;
extern unsigned char interface;
extern unsigned int Vp;
extern unsigned char k;
extern unsigned char count;
extern unsigned char led1,led2,led3;
extern bit flag;
extern bit l8;
extern unsigned int t0;
//sys.c
void Select_74HC138(unsigned char channel);
void InitSystem();
void Delay(unsigned int ms);
void OperateLed(unsigned char who,status);
void Timer0Init(void);
//nixie.c
void DisplayBit(unsigned char pos,value,bit k);
void DisplayVolt();
void DisplayVp();
void DisplayCount();
void DisplaySMG();
//key.c
void KeyScans();
#endif

可能快比赛了，有点浮躁，就写的有点麻烦，不过功能还是实现了的。