【信号去噪】基于快速子带自适应滤波 (FSAF)实现信号去噪处理附matlab代码

1 内容介绍

This book describes a few [sub]optimal adaptive filtration algorithms for solving various room acoustic related audio / speech processing problems such as Adaptive Echo / Noise / Feedback / Reverberation Cancellation, etc. If you are reading this text, you most likely already know what AEC / ANC / AFC are about. Other applications may exist but I am not an expert in other fields. Sub-optimal algorithms are a can of worms, you can start working on them but you can never finish. Thus, there is nothing conclusive nor final in this publication, it is a set of intermediate results for the next researcher(s) to pick up and evolve further, and I would like to pre-emptively apologize for the lengthy explanation in the “We shall tell it at length, thoroughly, in detail – for when did a narrative seem too long or too short by reason of actual time of space it took up? We do not fear being called meticulous, inclining as we do to the view that only the exhaustive can be truly interesting” style instead of “For every complex problem there is an answer that is clear, simple, and wrong”. The main problem addressed here is the curse of dimensionality and close-to-singular spectra, in the context of real-time low latency slightly nonlinear, both stationary and non-stationary FIR system identification of Room Impulse Response (RIR). The base is the well-developed theory of adaptive control. The proposed Fast(er) Subband Adaptive Filtering (FSAF) is an evolution of the Subband Adaptive Filtering (SAF) approach originally proposed by Prof. Dr.-Ing. Walter Kellermann in “Analysis and design of multirate systems for the cancellation of acoustical echoes” at ICASSP-1988. Although the text below is full of comparisons with the original proposal by Dr. W. Kellerman and demonstrations of the superiority of the new approach, these comparisons shall not be considered as belittling of the original approach in any respect. The set of new techniques, summarily named FSAF, is faster in all respects: converging faster, taking less MIPS, having lower processing latency, etc. But it’s NOT as “fast” as FFT where all opportunities have been exploited. The proposed technology is not THE fastest adaptive technology but a step towards it, one of infinitely many. FSAF, besides usual per-subband processing, can be used to solve very high dimension system identification problems in a divide and conquer style. For any predefined precision δ, FSAF solves M much smaller, ~1/(M + o(1/δp)), better-conditioned problems in subbands, using either RLS or diagonal / scalar step-size algorithms like Kaczmarz a.k.a. [N]LMS, and converts them back to the fullband time domain, which is Perfect Reconstruction Open-Loop Delay-less SAF. Note that FSAF allows nesting / recomposing of the subband architecture, thus allowing efficient fast converging low-latency low MIPS application for A#C. In 2001, yours truly left his job and went home, to work on the theoretical background of subband adaptive filtering. It was obvious that all low-hanging fruits have already been harvested, and I needed years of concentration on research to achieve anything of value. Alas, there was not a single employer around willing to wait an undetermined number of years for unpredictable results. Most of the groundwork was done in the early 2000s while working on AEC. By 2004...2005, good understanding of the core problems crystallized. It looked so obvious that I could not believe it had not been found by somebody else… but I could not find a relevant publication. 15 years later, I am still puzzled. In 2019, I decided to “pass the torch” to somebody else1.

2 部分代码

clear all;

close all

[x,FS]=audioread('wav/spk.wav');

lenin=length(x);

%t=(1:lenin)*1e3/FS;plot(t,x);

W=FS*100e-3;

[s,f,t]=spectrogram(x,W,W*0.9,W,FS);

S=db(s);

%S=S';

S=S-max(max(S));

S=max(S,-80);

%S=flipud(S);

fsaf.fig(1);

%legend('off');

colormap jet

imagesc('XData',t,'YData',f,'CData',S);colorbar;

axis([0 max(t) 0 max(f)])

grid on;

xlabel('time, s');

ylabel('freq, Hz');

title('speech spectrogram');

N=4;

SF=length(f)-1;

sf=SF/20;

fsaf.fig(2);

for idx=1:N

    subplot(N,1,N-idx+1);

    ii=idx*3-0;

    idx1=(ii-2)*sf+0;

    idx2=ii*sf+1;

    si=S(idx1:idx2,:);

    si=si-max(max(si));

    colormap jet

    imagesc('XData',t,'YData',f(idx1:idx2),'CData',si);

    xlim([0 max(t)]);

    ylim([f(idx1) f(idx2)])

    grid on;

end

title('speech spectrogram in subbands');

3 运行结果

4 参考文献

[1]王秀丽, 郭改枝, 宋鑫梦,等. 基于自适应滤波地下管道漏水信号去噪处理研究[J]. 内蒙古师范大学学报:自然科学汉文版, 2015, 44(5):4.

博主简介:擅长智能优化算法神经网络预测信号处理元胞自动机图像处理路径规划无人机雷达通信无线传感器等多种领域的Matlab仿真,相关matlab代码问题可私信交流。

部分理论引用网络文献,若有侵权联系博主删除。

### 回答1: 自适应滤波器是一种用于信号处理的算法,可以根据输入信号的特点自动调整滤波器的参数。下面是一个使用Matlab编写LMS(最小均方)自适应滤波器的示例代码: % 定义输入信号 input_signal = [1, 2, 3, 4, 5, 4, 3, 2, 1]; % 定义期望信号(滤波器的输出) desired_signal = [0, 0, 0, 0, 0, 1, 1, 1, 1]; % 定义初始权重 weights = ones(1, length(input_signal)); % 定义步长(学习速率) step_size = 0.01; % 定义滤波器输出 output_signal = zeros(1, length(input_signal)); % 开始迭代更新权重 for i = 1:length(input_signal) % 计算滤波器输出 output_signal(i) = weights * input_signal'; % 计算误差 error = desired_signal(i) - output_signal(i); % 更新权重 weights = weights + step_size * error * input_signal; end % 显示滤波器输出和期望信号 disp('滤波器输出:') disp(output_signal) disp('期望信号:') disp(desired_signal) 上述代码中,通过定义输入信号和期望信号,以及初始权重和学习速率,使用LMS算法来迭代更新权重,从而得到自适应滤波器的输出。最终,输出结果会显示滤波器输出和期望信号,用于对比分析滤波器的性能。 请注意,此代码只是一个简单的示例,实际应用中可能需要根据具体需求进行参数调整和算法改进。 ### 回答2: LMS自适应滤波器是一种常用的信号处理方法,它可以通过不断修正滤波器的权重来实现信号滤波和去噪。 以下是一个基于MATLAB的LMS自适应滤波器的示例代码: ```matlab % 定义输入信号和期望信号 input_signal = randn(1000,1); % 输入信号为高斯噪声 desired_signal = filter([1,2,3],1,input_signal); % 期望信号为输入信号的滤波结果 % 初始化滤波器权重 filter_order = 3; % 滤波器阶数 filter_coef = zeros(filter_order,1); % 初始权重为零 % 设置LMS自适应滤波器的参数 learning_rate = 0.01; % 学习率 % 实施滤波器 output_signal = zeros(size(desired_signal)); % 存储滤波器的输出信号 for i = filter_order:length(input_signal) input_vector = input_signal(i:-1:i-filter_order+1); % 构建输入向量,长度为滤波器阶数 output_signal(i) = filter_coef' * input_vector; % 将输入向量与滤波器权重进行内积得到输出信号 error = desired_signal(i) - output_signal(i); % 计算输出误差 filter_coef = filter_coef + learning_rate * error * input_vector; % 更新滤波器权重 end % 绘制图像 figure; subplot(2,1,1); plot(desired_signal); hold on; plot(output_signal); legend('期望信号','输出信号'); title('信号处理前后对比'); subplot(2,1,2); plot(filter_coef); title('滤波器权重'); % 打印滤波器权重 disp('滤波器权重:'); disp(filter_coef); ``` 以上代码实现了一个LMS自适应滤波器,通过不断迭代修正滤波器的权重,使得滤波器的输出信号逼近于期望信号。具体实现过程为:首先定义输入信号和期望信号,然后初始化滤波器权重和参数,开始进行滤波。通过构建输入向量,将其与滤波器权重进行内积得到输出信号,计算输出误差并更新滤波器权重。最后绘制了信号处理前后的对比图和滤波器权重的变化图,并打印了滤波器权重。 ### 回答3: LMS自适应滤波器是一种经典的自适应滤波算法,用于去除信号中的噪声。MATLAB提供了LMS自适应滤波器的函数lms,可以方便地实现LMS算法。 以下是使用MATLAB编写LMS自适应滤波器的代码示例: ```matlab % 设置输入信号和目标信号 input_signal = ...; % 输入信号 target_signal = ...; % 目标信号 % 初始化滤波器系数 filter_order = 10; % 滤波器阶数 filter_coeffs = zeros(filter_order, 1); % 滤波器系数 % 设置LMS算法参数 step_size = 0.01; % 步长 block_size = 100; % 每次迭代处理的样本数 % 开始LMS自适应滤波过程 num_iterations = length(input_signal) / block_size; % 迭代次数 for iter = 1:num_iterations % 提取当前处理的输入信号块和目标信号块 input_block = input_signal((iter-1)*block_size+1:iter*block_size); target_block = target_signal((iter-1)*block_size+1:iter*block_size); % 使用LMS算法更新滤波器系数 estimated_target = filter_coeffs' * input_block; % 估计的目标信号 error = target_block - estimated_target; % 误差信号 filter_coeffs = filter_coeffs + step_size * input_block * error; end ``` 以上代码中,首先我们初始化了滤波器系数,并设置了LMS算法的参数。然后,通过迭代处理输入信号和目标信号的块,使用LMS算法更新滤波器系数。其中估计的目标信号和误差信号通过将滤波器系数与输入信号块相乘得到,并与目标信号块进行比较得到。 以上就是使用MATLAB实现LMS自适应滤波器的代码示例,通过不断迭代更新滤波器系数,可以逐渐降低输入信号中的噪声。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

matlab科研助手

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值