ac97与intel HD audio

1.从上表可以看出，第1、2、3、5、9虽然名字有所变化，其功能没有改变。这就可以使HD Audio前置音频插座与AC97的前置音频面板兼容。

2.There is only one problem with the terminations of the audio cable, and it is that the two terminations are of the same color but they are not interchangeable.

3.根据HD Audio的针脚定义和插口感知原理，只要把第4针PRESENCE#信号接地，使其降为低电平，表示连接前置音频面板。把第7针SENSE_SEND信号接地，使其降为低电平，就表示有插头插入。

http://www.sevenforums.com/sound-audio/44491-ac97-hd-audio-front-panel-layouts.html

HD Audio headers are pin-compatible with AC'97 chassis and connectors.

For HD audio front panel modules

Pin Signal Description Pin Signal Description 1 PORT 1L Analog Port 1 - left channel (Microphone) 2 GND Ground 3 PORT 1R Analog Port 1 - right channel (Microphone) 4 PRESENCE# Active low signal that signals BIOS that an Intel® HD Audio dongle is connected to the analog header. PRESENCE# = 0 when an Intel® HD Audio dongle is connected 5 PORT 2R Analog Port 2 - right channel (Headphone) 6 SENSE1_RETURN Jack detection return for front panel (JACK1) 7 SENSE_SEND Jack detection sense line from the Intel® HD Audio CODEC jack detection resistor network 8 KEY No pin 9 PORT 2L Analog Port 2 - left channel (Headphone) 10 SENSE2_RETURN Jack detection return for front panel (JACK2)

For AC97 front panel modules

Pin	Signal	Description	Pin	Signal	Description
1	MIC	Front panel microphone input signal (biased when supporting stereo microphone)	2	AUD_GND	Ground used by analog
3	MIC_BIAS	Microphone power /  extra MIC input for stereo microphone support	4	AUD_GND	Ground used by analog audio circuits
5	FP_OUT_R	Right channel audio signal to front panel (headphone drive capable)	6	FP_RETURN_R	Right channel audio signal return from front panel (when headphones unplugged)
7	AUD_5V	Filtered +5V used by analog audio circuits	8	KEY	No pin
9	FP_OUT_L	Left channel audio signal to front panel (headphone drive capable)	10	FP_RETURN_L	Left channel audio signal return from front panel (when headphones unplugged)