搭建imx93yocto开发工程

1.下载NXP提供的源码

repo init -u https://github.com/nxp-imx/imx-manifest.git  -b imx-linux-scarthgap -m imx-6.6.23-2.0.0.xml

repo sync

2.安装依赖

sudo apt install gawk wget git diffstat unzip texinfo gcc build-essential
chrpath socat cpio python3 python3-pip python3-pexpect xz-utils debianutils
iputils-ping python3-git python3-jinja2 python3-subunit zstd liblz4-tool file
locales libacl1

 sudo apt-get install zstd lz4

具体分支内容参考：

GitHub - nxp-imx/imx-manifest at imx-linux-scarthgap

该工程支持如下开发板

i.MX Linux Yocto Project BSP 6.6.23_2.0.0 Release
=====================================================
Note this is release is not a production release.
Please see the release notes for the quality statement for each board.
The following boards were tested in this release.
   * NXP i.MX 95 EVK (imx95evk)
   * NXP i.MX 93 EVK (imx93evk)
   * NXP i.MX 91 EVK (imx91evk)
   * NXP i.MX 8MQuad EVK (imx8mqevk)
   * NXP i.MX 8MMini EVK (imx8mmevk)
   * NXP i.MX 8MNano EVK (imx8mnevk)
   * NXP i.MX 8MPlus EVK (imx8mpevk)
   * NXP i.MX 8QuadMax MEK (imx8qmmek)
   * NXP i.MX 8QuadXPlus MEK (imx8qxpc0mek)
   * NXP i.MX 8DXL EVK (imx8dxlevk)
   * NXP i.MX 8ULP EVK (imx8ulpevk)
   * NXP i.MX 7ULP EVK (imx7ulpevk)
   * NXP i.MX 7Dual SABRE Smart Device (imx7dsabresd)
   * NXP i.MX 6QuadPlus SABRE Device (imx6qpsabresd)
   * NXP i.MX 6Quad SABRE Smart Device (imx6qsabresd)
   * NXP i.MX 6DualLite SABRE Smart Device (imx6dlsabresd)
   * NXP i.MX 6SOLO SABRE Smart Device (imx6solosabresd )
   * NXP i.MX 6SoloX SABRE Smart Device (imx6sxsabresd)
   * NXP i.MX 6UltraLite EVK (imx6ulevk)
   * NXP i.MX 6ULL EVK (imx6ull14x14evk)
   * NXP i.MX 6ULZ EVK (imx6ulz14x14evk)

3.构建系统

DISTRO=fsl-imx-wayland MACHINE=imx93evk source imx-setup-release.sh -b build

bitbake core-image-base

如果中途有下载资源失败，只能够再bitbake core-image-base
需要科学上网

完成时间：
2024/8/28