HMC833 写寄存器解析

一、PLL芯片HMC833

 

 

 

 

 

 

 

 

芯片初始化设计流程说明：

 

 

 

//

寄存器详细解析：

//

 

 

一、The VCO frequency is counted for Tmmt, the period of a single AutoCal measurement cycle.   Tmmt= Txtal*R*2n    0AH [2:0] n ; 02H R ; 

二、N is the ratio of the target VCO frequency, fvco, to the frequency of the PD, fpd, where N can

be any rational number supported by the N divider.  N=Nint + Nfrac/224。

三、The AutoCal state machine and the data transfers to the internal VCO subsystem SPI (VSPI) run at the rate

of the FSM clock, TFSM, where the FSM clock frequency cannot be greater than 50 MHz.   TFSM = Txtal · 2m

四、The expected number of VCO counts, V, is given by  V =floor(N * 2n)。

五、The nominal VCO frequency measured, fvcom, is given by   fvcom = V*fxtal/(2n*R)。

六、where the worst case measurement error, ferr , is:    ferr 约等于  ±fpd/2n+1 。

七、total calibrati