深度学习应用1——手势识别测试

# _*_ coding: UTF-8 _*_
import cv2
import numpy as np
import math

cap = cv2.VideoCapture(0)

while (cap.isOpened()):
    ret, frame = cap.read()  # 读取摄像头每帧图片

    frame = cv2.flip(frame, 1)
    kernel = np.ones((2, 2), np.uint8)
    roi = frame[100:300, 100:300]  # 选取图片中固定位置作为手势输入

    cv2.rectangle(frame, (100, 100), (300, 300), (0, 0, 255), 0)  # 用红线画出手势识别框
    # 基于hsv的肤色检测
    hsv = cv2.cvtColor(roi, cv2.COLOR_BGR2HSV)
    lower_skin = np.array([0, 28, 70], dtype=np.uint8)
    upper_skin = np.array([20, 255, 255], dtype=np.uint8)

    # 进行高斯滤波
    mask = cv2.inRange(hsv, lower_skin, upper_skin)
    mask = cv2.dilate(mask, kernel, iterations=4)
    mask = cv2.GaussianBlur(mask, (5, 5), 100)

    # 找出轮廓
    contours, h = cv2.findContours(mask, cv2.RETR_TREE, cv2.CHAIN_APPROX_SIMPLE)
    cnt = max(contours, key=lambda x: cv2.contourArea(x))
    epsilon = 0.0005 * cv2.arcLength(cnt, True)
    approx = cv2.approxPolyDP(cnt, epsilon, True)
    hull = cv2.convexHull(cnt)
    areahull = cv2.contourArea(hull)
    areacnt = cv2.contourArea(cnt)
    arearatio = ((areahull - areacnt) / areacnt) * 100
    # 求出凹凸点
    hull = cv2.convexHull(approx, returnPoints=False)
    defects = cv2.convexityDefects(approx, hull)
    l = 0  # 定义凹凸点个数初始值为0
    for i in range(defects.shape[0]):
        s, e, f, d, = defects[i, 0]
        start = tuple(approx[s][0])
        end = tuple(approx[e][0])
        far = tuple(approx[f][0])
        pt = (100, 100)

        a = math.sqrt((end[0] - start[0]) ** 2 + (end[1] - start[1]) ** 2)
        b = math.sqrt((far[0] - start[0]) ** 2 + (far[1] - start[1]) ** 2)
        c = math.sqrt((end[0] - far[0]) ** 2 + (end[1] - far[1]) ** 2)
        s = (a + b + c) / 2
        ar = math.sqrt(s * (s - a) * (s - b) * (s - c))
        # 手指间角度求取
        angle = math.acos((b ** 2 + c ** 2 - a ** 2) / (2 * b * c)) * 57

        if angle <= 90 and d > 20:
            l += 1
            cv2.circle(roi, far, 3, [255, 0, 0], -1)
        cv2.line(roi, start, end, [0, 255, 0], 2)  # 画出包络线
    l += 1
    font = cv2.FONT_HERSHEY_SIMPLEX
    # 下面的都是条件判断，也就是知道手势后你想实现神么功能就写下面判断里就行了。
    if l == 1:
        if areacnt < 2000:
            cv2.putText(frame, "put hand in the window", (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
        else:
            if arearatio < 12:
                cv2.putText(frame, '0', (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
            elif arearatio < 17.5:
                cv2.putText(frame, "1", (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
            else:
                cv2.putText(frame, '1', (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
    elif l == 2:
        cv2.putText(frame, '2', (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
    elif l == 3:
        if arearatio < 27:
            cv2.putText(frame, '3', (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
        else:
            cv2.putText(frame, '3', (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
    elif l == 4:
        cv2.putText(frame, '4', (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
    elif l == 5:
        cv2.putText(frame, '5', (0, 50), font, 2, (0, 0, 255), 3, cv2.LINE_AA)
    cv2.imshow('frame', frame)
    cv2.imshow('mask', mask)
    k = cv2.waitKey(25) & 0xff
    if k == 27:  # 键盘Esc键退出
        break
cv2.destroyAllWindows()
cap.release()

https://www.computervision.zone/lessons/video-lesson-5/

opencv检测手势后并移动矩形框

import cv2
from cvzone.HandTrackingModule import HandDetector

import cvzone
import numpy as np



cap = cv2.VideoCapture(0)
cap.set(3,1280)
cap.set(4,720)
detector = HandDetector(detectionCon=0.8)
colorR = (255,0,255)
cx,cy,h,w = 100,100,200,200   #定义矩形的中心点和宽高
lmlist = []


class DragRect():
    def __init__(self,posCenter,size=[200,200]):
        self.posCenter = posCenter
        self.size = size
    def update(self,cursor):
        cx,cy = self.posCenter
        w,h= self.size
        if cx - w // 2 < cursor[0] < cx + w // 2 and cy - h // 2 < cursor[1] < cy + h // 2:  # 判断点是否在框内
            colorR = 0, 255, 0
            self.posCenter = cursor  # 将手指尖的点赋值给动态的cx,cy,使矩形框跟随

rectlist = []
for x in range(5):
    rectlist.append(DragRect([x*250+150,150]))
while True:
    success,img = cap.read()
    #水平翻转图像
    img = cv2.flip(img,1)
    #检测手指
    allHands,img = detector.findHands(img)
    #lmlist,_ = detector.fingersUp(img)
    if len(allHands) != 0:
        lmlist = allHands[0]['lmList']
        pass

    if len(allHands) != 0:
        l,_,_ =detector.findDistance(lmlist[8],lmlist[12],img)  #得到食指和中指的距离l
        print(l)
        if l<75:
            cursor = lmlist[8]   #找到手指尖的点
            for rect in rectlist:
                rect.update(cursor)

    #画实体
    # for rect in rectlist:
    #     cx, cy = rect.posCenter
    #     w, h = rect.size
    #     cv2.rectangle(img,(cx-w//2,cy-h//2),(cx+w//2,cy+h//2),colorR,cv2.FILLED)
    #     cvzone.cornerRect(img,(x-w//2,cy-h//2,w,h),20,rt=0)
    #画有透明度的矩形框
    imgNew = np.zeros_like(img,np.uint8)
    for rect in rectlist:
        cx, cy = rect.posCenter
        w, h = rect.size
        cv2.rectangle(imgNew, (cx - w // 2, cy - h // 2), (cx + w // 2, cy + h // 2), colorR, cv2.FILLED)
        cvzone.cornerRect(imgNew, (cx - w // 2, cy - h // 2, w, h), 20, rt=0)
    out = img.copy()
    alpha = 0.5
    mask = imgNew.astype(bool)
    out[mask] = cv2.addWeighted(img,alpha,imgNew,1-alpha,0)[mask]


    cv2.imshow("Image",out)
    cv2.waitKey(1)