重发布基础实验

 实验要求：

具体拓扑图如下：

操作思路：

1.配置IP

2.左边配置RIP，右边配置OSPF

3.采用多点双向重发布做到两边全通

4.采用路由策略优化选路

具体配置如下：

R1
[r1]int g0/0/1
[r1-GigabitEthernet0/0/1]ip add 14.1.1.1 24 
[r1-GigabitEthernet0/0/1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 12.1.1.1 24
[r1-GigabitEthernet0/0/0]int lo0
[r1-LoopBack0]ip add 1.1.1.1 24
[r1]rip 1
[r1-rip-1]version 2    
[r1-rip-1]network 1.0.0.0
[r1-rip-1]network 12.0.0.0  
[r1-rip-1]network 14.0.0.0
[r1]interface GigabitEthernet0/0/0                
[r1-GigabitEthernet0/0/0] rip metricin ip-prefix 4 2
[r1-GigabitEthernet0/0/0]interface GigabitEthernet0/0/1                
[r1-GigabitEthernet0/0/1] rip metricin ip-prefix 3 2
[r1]ip ip-prefix 4 index 10 permit 4.4.4.0 24 
[r1]ip ip-prefix 4 index 20 permit 34.1.1.0 24
[r1]ip ip-prefix 3 index 10 permit 23.1.1.0 24

R2
[r2]int g0/0/0
[r2-GigabitEthernet0/0/0]ip add 12.1.1.2 24
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 23.1.1.1 24
[r2-GigabitEthernet0/0/1]int lo0
[r2-LoopBack0]ip add 2.2.2.2 24
[r2]rip 1                                     
[r2-rip-1] version 2                                
[r2-rip-1] network 12.0.0.0                         
[r2-rip-1] network 2.0.0.0
[r2]ospf 1 router-id 2.2.2.2                  
[r2-ospf-1] area 0.0.0.0                             
[r2-ospf-1-area-0.0.0.0]  network 23.1.1.1 0.0.0.0
[r2]ospf 1
[r2-ospf-1]import-route rip                
[r2-ospf-1] import-route rip 1 route-policy gg
[r2-ospf-1]route-policy gg permit node 10            
Info: New Sequence of this List.
[r2-route-policy] if-match ip-prefix gg                    
[r2-route-policy] apply cost-type type-1
[r2-route-policy]route-policy gg permit node 20            
Info: New Sequence of this List.
[r2-route-policy] if-match ip-prefix gg                    
[r2-route-policy] apply cost-type type-1
[r2-route-policy]route-policy gg permit node 50
Info: New Sequence of this List.
[r2-route-policy]q
[r2]ip ip-prefix gg index 10 permit 2.2.2.0 24
[r2]ip ip-prefix gg index 20 permit 12.1.1.0 24

R3
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add 23.1.1.2 24
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add 34.1.1.1 24
[r3-GigabitEthernet0/0/1]int lo0
[r3-LoopBack0]ip add 3.3.3.3 24
[r3]ospf 1 router-id 3.3.3.3                  
[r3-ospf-1]area 0.0.0.0                             
[r3-ospf-1-area-0.0.0.0] network 3.3.3.3 0.0.0.0                 
[r3-ospf-1-area-0.0.0.0] network 23.1.1.2 0.0.0.0                
[r3-ospf-1-area-0.0.0.0] network 34.1.1.1 0.0.0.0
[r3]int g0/0/0  
[r3-GigabitEthernet0/0/0]shutdown 

R4
[r4]int g0/0/1
[r4-GigabitEthernet0/0/1]ip add 14.1.1.2 24
[r4-GigabitEthernet0/0/1]int g0/0/0
[r4-GigabitEthernet0/0/0]ip add 34.1.1.2 24
[r4-GigabitEthernet0/0/0]int lo0
[r4-LoopBack0]ip add 4.4.4.4 24
[r4]rip 1                                     
[r4-rip-1] version 2                                
[r4-rip-1] network 14.0.0.0
[r4]ospf 1 router-id 4.4.4.4                                        
[r4-ospf-1] area 0.0.0.0                             
[r4-ospf-1-area-0.0.0.0]  network 4.4.4.4 0.0.0.0                 
[r4-ospf-1-area-0.0.0.0]  network 34.1.1.2 0.0.0.0
[r4]int lo0 
[r4-LoopBack0]ospf network-type broadcast  
[r4]rip 1                                                           
[r4-rip-1] import-route ospf 1
[r4]ip ip-prefix gg permit 14.1.1.0 24
[r4]route-policy gg permit node 10
Info: New Sequence of this List.
[r4-route-policy]if-match ip-prefix gg
[r4-route-policy]apply cost-type type-1
[r4-route-policy]q
[r4]route-policy gg permit node 50
Info: New Sequence of this List.
[r4-route-policy]q
[r4]ospf  
[r4-ospf-1]import-route rip route-policy gg

 

实验结果如下：