鹰眼图是对全局地图的一种概略表达,具有与全局地图的空间参考和空间范围。为了更好起到空间提示和导航作用,有些还具备全局地图中重要地理要素,如主要河流、道路等的概略表达。通过两个axMapControl控件,主控件axMapControl 1和鹰眼控件axMapControl 2。要实现鹰眼功能,关键技术有两点,一是如何让两个控件使用的数据保持一致,另一点是如何绘制鹰眼控件中的显示方框。
一、数据共享,使用axMapControl1的控件的OnMapReplaced事件。OnMapReplace事件发生MapControl的地图被替换后,即IMapControl2::Map被另一个地图替换时(如IMapControl2::LoadMxFile方法被调用时或map属性被明确替换时)触发该事件。用这个事件来保持与当前图层同步。
1 private void axMapControl1_OnMapReplaced(object sender, ESRI.ArcGIS.Controls.IMapControlEvents2_OnMapReplacedEvent e)
2 {
3 if (axMapControl1.Map.LayerCount > 0)
4 {
5 for (int i = 0; i <= axMapControl1.Map.LayerCount - 1; i++)
6 {
7 axMapControl2.AddLayer(axMapControl1.get_Layer(i));
8 }
9 axMapControl2.Extent=axMapControl1.Extent;
10 axMapControl2.Refresh();
11 }
12 }
二、显示方框的绘制。在鹰眼控件axMapControl2中使用鼠标拖曳视图时,鹰眼控件axMapControl2中出现红色矩形框。
1)axMapControl1控件的OnExtentUpdated事件。OnExtentUpdated事件在MapControl的可视化范围发生变化后发生,即当IMapControl2::Extent属性发生变化时被触发。改变MapControl中可视化范围的途径包括精确设置范围、缩放、漫游或使用IMapControl2::CenterAt方法等。
1 private void axMapControl1_OnExtentUpdated(object sender, ESRI.ArcGIS.Controls.IMapControlEvents2_OnExtentUpdatedEvent e)
2 {
3 //获得一个新范围
4 IEnvelope pEnvelope = (IEnvelope)e.newEnvelope;
5 IGraphicsContainer pGrahicsContainer = axMapControl2.Map as IGraphicsContainer;
6 IActiveView pActiveView = pGrahicsContainer as IActiveView;
7 //在绘制前清除axMapControl2中所有图层
8 pGrahicsContainer.DeleteAllElements();
9 IRectangleElement pRectangleElement = new RectangleElementClass();
10 IElement pElement = pRectangleElement as IElement;
11 pElement.Geometry = pEnvelope;
12 //设置鹰眼图中的红线框
13 IRgbColor pColor = new RgbColorClass();
14 pColor.Red = 255;
15 pColor.Green = 0;
16 pColor.Blue = 0;
17 pColor.Transparency = 255;
18 //产生一个线符号对象
19 ILineSymbol pOutline = new SimpleLineSymbolClass();
20 pOutline.Width = 3;
21 pOutline.Color = pColor;
22 //设置填充符号颜色
23 pColor = new RgbColorClass();
24 pColor.Red = 255;
25 pColor.Green = 0;
26 pColor.Blue = 0;
27 pColor.Transparency = 0;
28 //设置填充符号
29 IFillSymbol pFillSymbol = new SimpleFillSymbolClass();
30 pFillSymbol.Color = pColor;
31 pFillSymbol.Outline = pOutline;
32
33 IFillShapeElement pFillShapeEle = pElement as IFillShapeElement;
34 pFillShapeEle.Symbol = pFillSymbol;
35 pGrahicsContainer.AddElement((IElement)pFillShapeEle, 0);
36 pActiveView.PartialRefresh(esriViewDrawPhase.esriViewGraphics, null, null);
37
38 }
2)axMapControl2控件的OnMouseDown事件。当在MapControl上点击鼠标任何键时触发OnMouseDown事件。
1 private void axMapControl2_OnMouseDown(object sender, ESRI.ArcGIS.Controls.IMapControlEvents2_OnMouseDownEvent e)
2 {
3 if (axMapControl2.Map.LayerCount > 0)
4 {
5 if (e.button == 1)
6 {
7 IPoint pPoint = new PointClass();
8 pPoint.PutCoords(e.mapX, e.mapY);
9 axMapControl1.CenterAt(pPoint);
10 axMapControl1.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGeography, null, null);
11 }
12 else if (e.button == 2)
13 {
14 IEnvelope pEnv = axMapControl2.TrackRectangle();
15 axMapControl1.Extent = pEnv;
16 axMapControl1.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGeography, null, null);
17 }
18 }
19 }
3)axMapControl2控件的OnMouseMove事件。当在MapControl上移动鼠标时不断地触发OnMouseMove事件。
1 private void axMapControl2_OnMouseMove(object sender, ESRI.ArcGIS.Controls.IMapControlEvents2_OnMouseMoveEvent e)
2 {
3 if (e.button == 1)
4 {
5 IPoint pPoint = new PointClass();
6 pPoint.PutCoords(e.mapX, e.mapY);
7 axMapControl1.CenterAt(pPoint);
8 axMapControl1.ActiveView.PartialRefresh(esriViewDrawPhase.esriViewGeography, null, null);
9 }
10 }
三、结论
当axMapControl1中的数据被替换时,axMapControl2中的数据会自动加载axMapControl1的所有图层,实现两者的数据统一。在axMapControl2控件中拖曳或移动地图时,axMapControl1中的地图也在随时变化。
参考文献:基于ArcGIS Engine与C#.net的地图鹰眼功能的实现 南峰
《ArcGIS Engine 10 开发手册》
《ArcObjects二次开发教程》傅仲良 主编
《ArcObjects Developer Help》