Lab03 spine1/2 M-LAG

Lab03 spine1/2 M-LAG

Spine1、spine2的初始配置
1、 spine1、spine2做M-LAG，10GE1/0/11 做peer link ，主设备优先级150，生成树采用v-stp模式
2、 在spine1、2上配置与FW1、2的M-LAG以V-stp的方式配置。在spine1、2及SDN-FW1、2上开启LLDP协议，考试预配置已开启，无需配置。
3、 Spine1、spine2之间为南北向多活网关。VTEP ip为10.45.45.45。虚拟MAC为0000-5e00-1002。

配置思路
1、STP开启
2、DFS组配置
3、peer-link配置
4、m-lag配置
5、对端端口、聚合配置
6、聚合状态检查

1、 Spine1、spine2初始配置及DFS-group配置

Spine1

Sysname Spine-1
Lldp enable

Spine2

Sysname Spine-2
Lldp enable

通过Dis lldp nei brief查看下spine1和spine2之间互联线缆。
Spine1

Inter 10G	1/0/17
 Undo portswitch
 Ip add 172.16.1.45 30

Spine2

Inter 10ge 1/0/17
 Undo portswitch
 Ip add 172.16.1.46 30
Ping 172.16.1.45  互联测试

Spine1

Dfs-group 1
Source ip 172.16.1.45
Priority 150

Spine2

Dfs-group 1
Source ip 172.16.1.46

2、 Peer link配置

Spine1

Inter eth-trunk 1
 Trunkport 10Ge 1/0/18
 Mode lacp-static
 Peer-link 1

Spine2

Inter eth-trunk 1
 Trunkport 10GE1/0/18
 Mode lacp-static
 Peer-link 1

Spine1

Stp mode rstp
Stp v-stp enable

Spine2

Stp mode rstp
Stp v-stp enable

3、 M-lag成员接口配置

Spine1

Inter eth-trunk2
 Trunkport 10GE1/0/6
 Mode lacp-static 
 Dfs-group 1 m-lag 1
 Port link-type trunk
 Undo port trunk allow vlan 1

Spine2

Inter eth-trunk 2
 Trunkport 10GE1/0/6
 Mode lacp-static
 Dfs-group 1 m-lag 1
 Port link-type trunk
 Undo port trunk allow vlan 1

Spine1

Inter eth-trunk3
 Trunkport 10GE1/0/7
 Mode lacp-static 
 Dfs-group 1 m-lag 2
 Port link-type trunk
 Undo port trunk allow vlan 1

Spine2

Inter eth-trunk 3
 Trunkport 10GE1/0/7
 Mode lacp-static
 Dfs-group 1 m-lag 2
 Port link-type trunk
 Undo port trunk allow vlan 1

Spine1、spine2与Internet路由器的M-LAG成员口，要创建vlan 1499

Spine1

Vlan batch 1499
Inter eth-trunk4
 Trunkport 10GE1/0/8
 Mode lacp-static 
 Dfs-group 1 m-lag 3
 Port link-type trunk
 Undo port trunk allow vlan 1

Spine2

Vlan batch 1499
Inter eth-trunk 4
 Trunkport 10GE1/0/8
 Mode lacp-static 
 Dfs-group 1 m-lag 3
 Port link-type trunk
 Undo port trunk allow vlan 1

4、 防火墙配置

Admin/Admin@123 防火墙第一次登陆要更改密码，建议更改成Huawei@123
FW1

Sysname SDN-FW1
Lldp enable

FW2

Sysname SDN-FW2
Lldp enable

FW1
Dis lldp nei list 查看互联接口

FW1

Inter eth-trunk 1
 Portswitch
 Trunkport G1/0/3 1/0/4
 Mode lacp-static
 Port link-type trunk
 Undo port trunk allow vlan 1

FW2

Inter eth-trunk 1
 Portswitch
 Trunkport G1/0/3 1/0/4
 Mode lacp-static
 Port link-type trunk
 Undo port trunk allow vlan 1

Dis eth-trunk 1 查看聚合状态