文章目录
一、File类的使用
File类的概述
- File类的一个对象,代表一个文件或一个文件目录(俗称:文件夹)
- File类声明在java.io包下:文件和文件目录路径的抽象表示形式,与平台无关
- File类中涉及到关于文件或文件目录的创建、删除、重命名、修改时间、文件大小等方法,并未涉及到写入或读取文件内容的操作。如果需要读取或写入文件内容,必须使用IO流来完成
- 后续File类的对象常会作为参数传递到流的构造器中,指明读取或写入的"终点"
- File对象可以作为参数传递给流的构造器
File类的实例化
(1)File常用构造器
-
public File(String pathname)
以pathname为路径创建File对象,可以是绝对路径或者相对路径,如果pathname是相对路径,则默认的当前路径在系统属性user.dir中存储
-
public File(String parent,String child)
以parent为父路径,child为子路径创建File对象
-
public File(File parent,String child)
根据一个父File对象和子文件路径创建File对象
(2)路径分隔符
- 路径中的每级目录之间用一个路径分隔符隔开
- 路径分隔符和系统有关:
- windows和DOS系统默认使用“\”来表示
- UNIX和URL使用“/”来表示
- Java程序支持跨平台运行,因此路径分隔符要慎用
- 为了解决这个隐患,File类提供了一个常量:public static final String separator。根据操作系统,动态的提供分隔符
File类的常用方法
(1)File类的获取功能
方法名称 | 方法描述 |
---|---|
public String getAbsolutePath() | 获取绝对路径 |
public String getPath() | 获取路径 |
public String getName() | 获取名称 |
public String getParent() | 获取上层文件目录路径。若无,返回null |
public long length() | 获取文件长度(即:字节数)。不能获取目录的长度。 |
public long lastModified() | 获取最后一次的修改时间,毫秒值 |
public String[] list() | 获取指定目录下的所有文件或者文件目录的名称数组 |
public File[] listFiles() | 获取指定目录下的所有文件或者文件目录的File数组 |
(2)File类的重命名功能
public boolean renameTo(File dest)
把文件重命名为指定的文件路径
(3)File类的判断功能
方法名称 | 方法描述 |
---|---|
public boolean isDirectory() | 判断是否是文件目录 |
public boolean isFile() | 判断是否是文件 |
public boolean exists( | 判断是否存在 |
public boolean canRead() | 判断是否可读 |
public boolean canWrite() | 判断是否可写 |
public boolean isHidden() | 判断是否隐藏 |
(4)File类的创建功能
方法名称 | 方法描述 |
---|---|
public boolean createNewFile() | 创建文件。若文件存在,则不创建,返回false |
public boolean mkdir() | 创建文件目录。如果此文件目录存在,就不创建了。 |
public boolean mkdirs() | 创建文件目录。如果上层文件目录不存在,一并创建注意事项:如果你创建文件或者文件目录没有写盘符路径,那么,默认在项目路径下 |
(5)File类的删除功能
public boolean delete()
:删除文件或者文件夹
删除注意事项:
Java中的删除不走回收站。
要删除一个文件目录,请注意该文件目录内不能包含文件或者文件目录
特殊说明
- 当磁盘中真有一个真实的文件或目录存在时,创建File对象时,各个属性会显式赋值;
- 当磁盘中没有真实的文件或目录对应时,那么创建对象时,除了指定的目录和路径之外,其他的属性都是取成员变量的默认值
/**
* 如何创建File类的实例
* File(String filePath)
* File(String parentPath,String childPath)
* File(File parentFile,String childPath)
*/
@Test
public void testFileConstructor(){
// 构造器1
File file1 = new File("hello.txt");//相对于当前module
File file2 = new File("D:\\he.txt");
System.out.println(file1);
System.out.println(file2);
// 构造器2
File file3 = new File("D:\\workspace","javaIO");
System.out.println(file3);
// 构造器3:
File file4 = new File(file3,"hi.txt");
System.out.println(file4);
}
/**
* public String getAbsolutePath():获取绝对路径
* public String getPath() :获取路径
* public String getName() :获取名称
* public String getParent():获取上层文件目录路径。若无,返回null
* public long length() :获取文件长度(即:字节数)。不能获取目录的长度。
* public long lastModified() :获取最后一次的修改时间,毫秒值
*
* public String[] list() :获取指定目录下的所有文件或者文件目录的名称数组
* public File[] listFiles() :获取指定目录下的所有文件或者文件目录的File数组
*/
@Test
public void test2(){
File file1 = new File("hello.txt");
File file2 = new File("G:\\BaiduNetdiskDownload\\IMG_20191114_194910.jpg");
File dirFile = new File("G:\\BaiduNetdiskDownload");
System.out.println(file1.getAbsolutePath());
System.out.println(file1.getPath());
System.out.println(file1.getName());
System.out.println(file1.getParent());
System.out.println(file1.length());
System.out.println(new Date(file1.lastModified()));
System.out.println("=======================");
System.out.println(file2.getAbsolutePath());
System.out.println(file2.getPath());
System.out.println(file2.getName());
System.out.println(file2.getParent());
System.out.println(file2.length());
System.out.println(file2.lastModified());
System.out.println("-----------------------");
String[] fileName = dirFile.list();
for (String name : fileName) {
System.out.println(name);
}
System.out.println("------************------");
File[] files = dirFile.listFiles();
for (File file : files) {
System.out.println(file.toString());
}
}
/**
* public boolean renameTo(File dest):把文件重命名为指定的文件路径
* 比如:file1.renameTo(file2)为例:
* 要想保证返回true,需要file1在硬盘中是存在的,且file2不能在硬盘中存在。
*/
@Test
public void testFileRename(){
File file1 = new File("G:\\BaiduNetdiskDownload\\IMG_20191114_194910.jpg");
File file2 = new File("G:\\BaiduNetdiskDownload\\IMG_20191114_1949103333.jpg");
boolean renameTo = file1.renameTo(file2);
System.out.println(renameTo);
}
/**
* public boolean isDirectory():判断是否是文件目录
* public boolean isFile() :判断是否是文件
* public boolean exists() :判断是否存在
* public boolean canRead() :判断是否可读
* public boolean canWrite() :判断是否可写
* public boolean isHidden() :判断是否隐藏
*/
@Test
public void testFileField(){
File file1 = new File("G:\\BaiduNetdiskDownload\\IMG_20191114_1949103333.jpg");
System.out.println(file1.isDirectory());
System.out.println(file1.isFile());
System.out.println(file1.exists());
System.out.println(file1.canRead());
System.out.println(file1.canWrite());
System.out.println(file1.isHidden());
System.out.println("--------------------");
File dirFile = new File("G:\\BaiduNetdiskDownload");
System.out.println(dirFile.isDirectory());
System.out.println(dirFile.isFile());
System.out.println(dirFile.exists());
System.out.println(dirFile.canRead());
System.out.println(dirFile.canWrite());
System.out.println(dirFile.isHidden());
}
/**
* public boolean createNewFile() :创建文件。若文件存在,则不创建,返回false
* @throws IOException
*/
@Test
public void testCreateNewFile() throws IOException {
File file1 = new File("test.txt");
if(!file1.exists()){
//文件的创建
file1.createNewFile();
System.out.println("创建成功");
}else{//文件存在
file1.delete();
System.out.println("删除成功");
}
}
/**
* public boolean mkdir() :创建文件目录。如果此文件目录存在,就不创建了。如果此文件目录的上层目录不存在,也不创建。
* public boolean mkdirs() :创建文件目录。如果此文件目录存在,就不创建了。如果上层文件目录不存在,一并创建
*
* 删除磁盘中的文件或文件目录
* public boolean delete():删除文件或者文件夹
* 删除注意事项:Java中的删除不走回收站。
*/
@Test
public void testMkdir(){
//文件目录的创建
File file1 = new File("d:\\io\\io1\\io3");
boolean mkdir = file1.mkdir();
if(mkdir){
System.out.println("创建成功1");
}
File file2 = new File("d:\\io\\io1\\io4");
boolean mkdir1 = file2.mkdirs();
if(mkdir1){
System.out.println("创建成功2");
}
//要想删除成功,io4文件目录下不能有子目录或文件
File file3 = new File("D:\\io\\io1\\io4");
System.out.println(file3.delete());
}
二、IO流原理及流的分类
Java IO原理
- I/O是Input/Output的缩写, I/O技术是非常实用的技术,用于处理设备之间的数据传输。如读/写文件,网络通讯等
- Java程序中,对于数据的输入/输出操作以“流(stream)” 的方式进行
- java.io包下提供了各种“流”类和接口,用以获取不同种类的数据,并通过标准的方法输入或输出数据
- 输入input:读取外部数据(磁盘、光盘等存储设备的数据)到程序(内存)中
- 输出output:将程序(内存)数据输出到磁盘、光盘等存储设备中
流的分类
-
按操作数据单位不同分为:字节流(8 bit),字符流(16 bit)
-
按数据流的流向不同分为:输入流,输出流
-
按流的角色的不同分为:节点流,处理流
抽象基类 字节流 字符流 输入流 InputStream Reader 输出流 OutputStream Writer -
Java的IO流共涉及40多个类,实际上非常规则,都是从如下4个抽象基类派生的
-
由这四个类派生出来的子类名称都是以其父类名作为子类名后缀
流的体系结构
重点关注和掌握的几个流的结构
抽象基类 | 节点流(文件流) | 缓冲流(处理流的一种) |
---|---|---|
InputStream | FileInputStream read(byte[] buffer) | BufferedInputStream (read(byte[] buffer)) |
OutputStream | FileOutputStream write(byte[] buffer,0,len) | BufferedOutputStream (write(byte[] buffer,0,len) flush()) |
Reader | FileReader read(char[] cbuf) | BufferedReader (read(char[] cbuf) readLine()) |
Writer | FileWriter write(char[] cbuf,0,len) | BufferedWriter (write(char[] cbuf,0,len) flush()) |
InputStream类
-
int read()
从输入流中读取数据的下一个字节。返回 0 到 255 范围内的 int 字节值。如果因为已经到达流末尾而没有可用的字节,则返回值 -1。
-
int read(byte[] b)
从此输入流中将最多 b.length 个字节的数据读入一个 byte 数组中。如果因为已经到达流末尾而没有可用的字节,则返回值 -1。否则以整数形式返回实际读取的字节数。
-
int read(byte[] b, int off,int len)
将输入流中最多 len 个数据字节读入 byte 数组。尝试读取 len 个字节,但读取的字节也可能小于该值。以整数形式返回实际读取的字节数。如果因为流位于文件末尾而没有可用的字节,则返回值 -1。
-
public void close() throws IOException
关闭此输入流并释放与该流关联的所有系统资源。
Reader类
-
int read()
读取单个字符。作为整数读取的字符,范围在0 到 65535 之间 (0x00-0xffff)(2个字节的Unicode码),如果已到达流的末尾,则返回 -1
-
int read(char[] cbuf)
将字符读入数组。如果已到达流的末尾,则返回 -1。否则返回本次读取的字符数。
-
int read(char[] cbuf,int off,int len)
将字符读入数组的某一部分。存到数组cbuf中,从off处开始存储,最多读len个字符。如果已到达流的末尾,则返回 -1。否则返回本次读取的字符数。
-
public void close() throws IOException
关闭此输入流并释放与该流关联的所有系统资源。
OutputStream类
-
void write(int b)
将指定的字节写入此输出流。write 的常规协定是:向输出流写入一个字节。要写入的字节是参数 b 的八个低位。b 的 24 个高位将被忽略。 即写入0~255范围的。
-
void write(byte[] b)
将 b.length 个字节从指定的 byte 数组写入此输出流。write(b) 的常规协定是:应该与调用 write(b, 0, b.length) 的效果完全相同。
-
void write(byte[] b,int off,int len)
将指定 byte 数组中从偏移量 off 开始的 len 个字节写入此输出流。
-
public void flush()throws IOException
刷新此输出流并强制写出所有缓冲的输出字节,调用此方法指示应将这些字节立即写入它们预期的目标。
-
public void close() throws IOException
关闭此输出流并释放与该流关联的所有系统资源。
Writer类
-
void write(int c)
写入单个字符。要写入的字符包含在给定整数值的 16 个低位中,16 高位被忽略。 即写入0 到 65535 之间的Unicode码。
-
void write(char[] cbuf)
写入字符数组。
-
void write(char[] cbuf,int off,int len)
写入字符数组的某一部分。从off开始,写入len个字符
-
void write(String str)
写入字符串。
-
void write(String str,int off,int len)
写入字符串的某一部分。
-
void flush()
刷新该流的缓冲,则立即将它们写入预期目标。
-
public void close() throws IOException
关闭此输出流并释放与该流关联的所有系统资源
@Test
public void testFileReader(){
FileReader fr = null;
try {
//1.实例化File类的对象,指明要操作的文件
File file = new File("hello.txt");//相较于当前Module
//2.提供具体的流
fr = new FileReader(file);
//3.数据的读入
//read():返回读入的一个字符。如果达到文件末尾,返回-1
int data;
while((data = fr.read()) != -1){
System.out.print((char)data);
}
} catch (IOException e) {
e.printStackTrace();
} finally {
//4.流的关闭操作
if(fr != null){
try {
fr.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
}
/**
* 使用read的重载方法
*/
@Test
public void testFileReader1() {
FileReader fr = null;
try {
//1.File类的实例化
File file = new File("hello.txt");
//2.FileReader流的实例化
fr = new FileReader(file);
//3.读入的操作
//read(char[] cbuf):返回每次读入cbuf数组中的字符的个数。如果达到文件末尾,返回-1
char[] cbuf = new char[5];
int len;
while((len = fr.read(cbuf)) != -1){
System.out.print(new String(cbuf,0,len));
}
} catch (IOException e) {
e.printStackTrace();
} finally {
if(fr != null){
//4.资源的关闭
try {
fr.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
}
/**
* 从内存中写出数据到硬盘的文件里。
*
* 说明:
* 1. 输出操作,对应的File可以不存在的。并不会报异常
* 2.
* File对应的硬盘中的文件如果不存在,在输出的过程中,会自动创建此文件。
* File对应的硬盘中的文件如果存在:
* 如果流使用的构造器是:FileWriter(file,false) / FileWriter(file):对原有文件的覆盖
* 如果流使用的构造器是:FileWriter(file,true):不会对原有文件覆盖,而是在原有文件基础上追加内容
* @throws IOException
*/
@Test
public void test() throws IOException {
File file = new File("hello.txt");
FileReader fis = new FileReader(file);
FileWriter fw = new FileWriter("newHello.txt");
int data;
char[] cbuf = new char[5];
while ((data = fis.read(cbuf)) != -1) {
fw.write(cbuf, 0, data);
}
fw.close();
fis.close();
}
@Test
public void testFileWriter() {
FileWriter fw = null;
try {
//1.提供File类的对象,指明写出到的文件
File file = new File("hello.txt");
//2.提供FileWriter的对象,用于数据的写出
fw = new FileWriter(file,false);
//3.写出的操作
fw.write("ceshi\n");
fw.write("Thank you!");
} catch (IOException e) {
e.printStackTrace();
} finally {
//4.流资源的关闭
if(fw != null){
try {
fw.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
}
@Test
public void testFileReaderFileWriter() {
FileReader fr = null;
FileWriter fw = null;
try {
//1.创建File类的对象,指明读入和写出的文件
File srcFile = new File("hello.txt");
File destFile = new File("hello2.txt");
//不能使用字符流来处理图片等字节数据
// File srcFile = new File("123.jpg");
// File destFile = new File("1234.jpg");
//2.创建输入流和输出流的对象
fr = new FileReader(srcFile);
fw = new FileWriter(destFile);
//3.数据的读入和写出操作
char[] cbuf = new char[5];
//记录每次读入到cbuf数组中的字符的个数
int len;
while((len = fr.read(cbuf)) != -1){
//每次写出len个字符
fw.write(cbuf,0,len);
}
} catch (IOException e) {
e.printStackTrace();
} finally {
//4.关闭流资源
try {
if(fw != null)
fw.close();
} catch (IOException e) {
e.printStackTrace();
}
try {
if(fr != null)
fr.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
输入、输出的标准化过程
(1)输入过程
- 创建File类的对象,指明读取的数据的来源(要求此文件一定要存在)
- 创建相应的输入流,将File类的对象作为参数,传入流的构造器中
- 具体的读入过程
- 创建相应的byte[] 或者char[]
- 关闭流资源
- 说明:程序中出现的异常需要使用
try-catch-finally
处理
(2)输出过程
- 创建File类的对象,指明写出的数据的位置。(不要求此文件一定要存在)
- 创建相应的输出流,将File类的对象作为参数,传入流的构造器中
- 具体的写出过程
- write(char[]/byte[] buffer, 0,len)
- 关闭资源
- 说明:程序中出现的异常需要使用
try-catch-finally
处理
三、节点流(文件流)
-
节点流:直接从数据源或目的地读写数据
-
处理流:不直接连接到数据源或目的地,而是“连接”在已存在的流(节点流或者处理流)之上,通过对数据的处理为程序提供更为强大的读写功能
(1)通过节点流读取文件内容
- 建立一个流对象,将已存在的一个文件加载进流。
FileReader fr = new FileReader(new File(“Test.txt”));
- 创建一个临时存放数据的数组。
char[] ch = new char[1024];
- 调用流对象的读取方法将流中的数据读入到数组中。
fr.read(ch);
- 关闭资源。
fr.close();
FileReader fr = null;
try {
fr = new FileReader(new File("c:\\test.txt"));
char[] buf = new char[1024];
int len;
while ((len = fr.read(buf)) != -1) {
System.out.print(new String(buf, 0, len));
}
} catch (IOException e) {
System.out.println("read-Exception :" + e.getMessage());
} finally {
if (fr != null) {
try {
fr.close();
} catch (IOException e) {
System.out.println("close-Exception :" + e.getMessage());
}
}
}
(2)写入数据
- 创建流对象,建立数据存放文件
FileWriter fw = new FileWriter(new File(“Test.txt”));
- 调用流对象的写入方法,将数据写入流
fw.write(“test_ggggg”);
- 关闭流资源,并将流中的数据清空到文件中。
fw.close();
FileWriter fw = null;
try {
fw = new FileWriter(new File("Test.txt"));
fw.write("ddfdfdsg");
} catch (IOException e) {
e.printStackTrace();
} finally {
if (fw != null)
try {
fw.close();
} catch (IOException e) {
e.printStackTrace();
}
}
特殊说明
- 输出操作,对应的File可以不存在的。并不会报异常
- File对应的硬盘中的文件如果不存在,在输出的过程中,会自动创建此文件。
- File对应的硬盘中的文件如果存在:
- 如果流使用的构造器是:FileWriter(file,false) / FileWriter(file):对原文件的覆盖
- 如果流使用的构造器是:FileWriter(file,true):不会对原文件覆盖,而是在原文件基础上追加内容
四、缓冲流
- 为了提高数据读写的速度,Java API提供了带缓冲功能的流类,在使用这些流类时,会创建一个内部缓冲区数组,缺省使用
8192个字节(8Kb)
的缓冲区 - 缓冲流要“套接”在相应的节点流之上,根据数据操作单位可以把缓冲流分为:
- BufferedInputStream 和 BufferedOutputStream
- BufferedReader 和 BufferedWriter
- 当读取数据时,数据按块读入缓冲区,其后的读操作则直接访问缓冲区
- 当使用BufferedInputStream读取字节文件时,BufferedInputStream会一次性从文件中读取8192个(8Kb),存在缓冲区中,直到缓冲区装满了,才重新从文件中读取下一个8192个字节数组
- 向流中写入字节时,不会直接写到文件,先写到缓冲区中直到缓冲区写满,BufferedOutputStream才会把缓冲区中的数据一次性写到文件里。使用方法flush()可以强制将缓冲区的内容全部写入输出流
- 关闭流的顺序和打开流的顺序相反。只要关闭最外层流即可,关闭最外层流也会相应关闭内层节点流
- flush()方法的使用:手动将buffer中内容写入文件
- 如果是带缓冲区的流对象的close()方法,不但会关闭流,还会在关闭流之前刷新缓冲区,关闭后不能再写出
- 缓冲流的作用
- 提高流的读取、写入速度
- 提高读写速度的原因是:内部提供了一个缓冲区,默认情况下是8KB
使用BufferedInputStream和BufferedOutputStream:处理非文本文件
@Test
public void testBuffered() {
BufferedInputStream bis = null;
BufferedOutputStream bos = null;
try {
//1.造文件
File srcFile = new File(srcPath);
File destFile = new File(destPath);
//2.造流
//2.1 造节点流
FileInputStream fis = new FileInputStream((srcFile));
FileOutputStream fos = new FileOutputStream(destFile);
//2.2 造缓冲流
bis = new BufferedInputStream(fis);
bos = new BufferedOutputStream(fos);
//3.复制的细节:读取、写入
byte[] buffer = new byte[1024];
int len;
while ((len = bis.read(buffer)) != -1) {
bos.write(buffer, 0, len);
}
} catch (IOException e) {
e.printStackTrace();
} finally {
//4.资源关闭
//要求:先关闭外层的流,再关闭内层的流
if (bos != null) {
try {
bos.close();
} catch (IOException e) {
e.printStackTrace();
}
}
if (bis != null) {
try {
bis.close();
} catch (IOException e) {
e.printStackTrace();
}
}
//说明:关闭外层流的同时,内层流也会自动的进行关闭。关于内层流的关闭,可以省略.
// fos.close();
// fis.close();
}
}
使用BufferedReader和BufferedWriter:处理文本文件
@Test
public void testBufferedReaderBufferedWriter() {
BufferedReader br = null;
BufferedWriter bw = null;
try {
// 创建缓冲流对象:它是处理流,是对节点流的包装
br = new BufferedReader(new FileReader("hello.txt"));
bw = new BufferedWriter(new FileWriter("t4.txt"));
//读写操作
//方式一:使用char[]数组
// char[] cbuf = new char[1024];
// int len;
// while((len = br.read(cbuf)) != -1){
// bw.write(cbuf,0,len);
// // bw.flush();
// }
//方式二:使用String
String str;
while ((str = br.readLine()) != null) { // 一次读取字符文本文件的一行字符
bw.write(str); // 一次写入一行字符串
bw.newLine(); // 写入行分隔符
}
bw.flush(); // 刷新缓冲区,可以省略
} catch (IOException e) {
e.printStackTrace();
} finally {
// 关闭IO流对象
try {
if (bw != null) {
bw.close(); // 关闭过滤流时,会自动关闭它所包装的底层节点流
}
} catch (IOException e) {
e.printStackTrace();
}
try {
if (br != null) {
br.close();
}
} catch (IOException e) {
e.printStackTrace();
}
}
}
获取文本上每个字符出现的次数,并按照字符出现的次数有大到小排序,最后将结果写入result.txt文件中
@Test
public void testCountStringNum() {
BufferedReader br = null;
HashMap countNum = new HashMap<Character, Integer>();
//1.统计各个字符出现的次数
try {
// 创建缓冲流对象:它是处理流,是对节点流的包装
br = new BufferedReader(new FileReader("hello1.txt"));
//统计文本红字符出现的次数
int len;
while ((len = br.read()) != -1) {
char ch = (char)len;
if (countNum.get(ch) == null) {
countNum.put(ch, 1);
} else {
countNum.put(ch, (int) countNum.get(ch) + 1);
}
}
} catch (IOException e) {
e.printStackTrace();
} finally {
// 关闭IO流对象
try {
if (br != null) {
br.close();
}
} catch (IOException e) {
e.printStackTrace();
}
}
//2.进行从大到小的排序操作
// 转换为List集合排序,按照出现次数从大到小排序
List<Map.Entry<Character, Integer>> result = new ArrayList<>(countNum.entrySet());
Collections.sort(result, (o1, o2) -> -Integer.compare(o1.getValue(), o2.getValue()));
//3.将统计结果写入文件
BufferedWriter bw = null;
try {
bw = new BufferedWriter(new FileWriter(new File("result.txt")));
for (Map.Entry<Character, Integer> entry : result) {
switch (entry.getKey()) {
case ' ':
bw.write("空格=" + entry.getValue());
break;
case '\t'://\t表示tab 键字符
bw.write("tab键=" + entry.getValue());
break;
case '\r'://
bw.write("回车=" + entry.getValue());
break;
case '\n'://
bw.write("换行=" + entry.getValue());
break;
default:
bw.write(entry.getKey() + "=" + entry.getValue());
break;
}
bw.newLine();//换行
}
} catch (IOException e) {
e.printStackTrace();
}finally {
// 关闭IO流对象
try {
if (bw != null) {
bw.close();
}
} catch (IOException e) {
e.printStackTrace();
}
}
}
五、转换流
- 转换流的作用:提供了在字节流和字符流之间的转换
- Java API提供了两个转换流:
- InputStreamReader:将InputStream转换为Reader
- OutputStreamWriter:将Writer转换为OutputStream
- 字节流中的数据都是字符时,转成字符流操作更高效。
- 很多时候使用转换流来处理文件乱码问题。实现编码和解码的功能
InputStreamReader
- 将一个字节的输入流转换为字符的输入流
- 解码:字节、字节数组---->字符数组、字符串
- 实现将字节的输入流按指定字符集转换为字符的输入流。
- 需要和InputStream“套接”。
- 构造器
public InputStreamReader(InputStream in)
public InputSreamReader(InputStream in,String charsetName)
- 如:
Reader isr = new InputStreamReader(System.in,”gbk”);
指定字符集
OutputStreamWriter
- 将一个字符的输出流转换为字节的输出流
- 编码:字符数组、字符串---->字节、字节数组
- 编码决定了解码的方式
- 实现将字符的输出流按指定字符集转换为字节的输出流。
- 需要和OutputStream“套接”。
- 构造器
public OutputStreamWriter(OutputStream out)
public OutputSreamWriter(OutputStream out,String charsetName)
使用案例
@Test
public void test1() throws IOException {
FileInputStream fis = new FileInputStream("hello.txt");
// InputStreamReader isr = new InputStreamReader(fis);//使用系统默认的字符集
//参数2指明了字符集,具体使用哪个字符集,取决于文件dbcp.txt保存时使用的字符集
InputStreamReader isr = new InputStreamReader(fis, "UTF-8");//使用系统默认的字符集
char[] cbuf = new char[20];
int len;
while ((len = isr.read(cbuf)) != -1) {
String str = new String(cbuf, 0, len);
System.out.print(str);
}
isr.close();
}
@Test
public void test2() throws Exception {
//1.造流
FileInputStream fis = new FileInputStream(new File("hello_utf8.txt"));
FileOutputStream fos = new FileOutputStream(new File("hello_gbk.txt"));
InputStreamReader isr = new InputStreamReader(fis, "utf-8");
OutputStreamWriter osw = new OutputStreamWriter(fos, "gbk");
//2.读写过程
char[] cbuf = new char[20];
int len;
while ((len = isr.read(cbuf)) != -1) {
osw.write(cbuf, 0, len);
}
//3.关闭资源
isr.close();
osw.close();
}
六、标准输入、输出流
- System.in和System.out分别代表了系统标准的输入和输出设备
- 默认输入设备是:键盘,输出设备是:显示器
- System.in的类型是InputStream
- System.out的类型是PrintStream,其是OutputStream的子类FilterOutputStream 的子类
- 重定向:通过System类的setIn,setOut方法对默认设备进行改变。
public static void setIn(InputStream in)
public static void setOut(PrintStream out)
七、打印流
- 实现将基本数据类型的数据格式转化为字符串输出
- 打印流:
PrintStream
和PrintWriter
- 提供了一系列重载的print()和println()方法,用于多种数据类型的输出
- PrintStream和PrintWriter的输出不会抛出IOException异常
- PrintStream和PrintWriter有自动flush功能
- PrintStream 打印的所有字符都使用平台的默认字符编码转换为字节。
- 在需要写入字符而不是写入字节的情况下,应该使用PrintWriter 类。
- System.out返回的是PrintStream的实例
示例
@Test
public void test() {
PrintStream ps = null;
try {
FileOutputStream fos = new FileOutputStream(new File("hello88.txt"));
// 创建打印输出流,设置为自动刷新模式(写入换行符或字节 '\n' 时都会刷新输出缓冲区)
ps = new PrintStream(fos, true);
if (ps != null) {// 把标准输出流(控制台输出)改成文件
System.setOut(ps);
}
for (int i = 0; i <= 255; i++) { // 输出ASCII字符
System.out.print((char) i);
if (i % 50 == 0) { // 每50个数据一行
System.out.println(); // 换行
}
}
} catch (FileNotFoundException e) {
e.printStackTrace();
} finally {
if (ps != null) {
ps.close();
}
}
}
八、数据流
- 为了方便地操作Java语言的基本数据类型和String的数据,可以使用数据流。
- 数据流有两个类:(用于读取和写出基本数据类型、String类的数据)
- DataInputStream 和 DataOutputStream
- 分别“套接”在 InputStream 和 OutputStream 子类的流上
- DataInputStream中的方法
- boolean readBoolean()
- byte readByte()
- char readChar()
- float readFloat()
- double readDouble()
- short readShort()
- long readLong()
- int readInt()
- String readUTF()
- void readFully(byte[] b)
- DataOutputStream中的方法
- 将上述的方法的read改为相应的write即可
示例:将内存中的字符串、基本数据类型的变量写出到文件中
@Test
public void test() throws IOException {
//1.造流
DataOutputStream dos = new DataOutputStream(new FileOutputStream("output.txt"));
//2.具体操作
dos.writeUTF("张三");
dos.flush();//刷新操作,将内存中的数据写入文件
dos.writeInt(89);
dos.flush();
dos.writeBoolean(true);
dos.flush();
//3.关闭流
dos.close();
}
示例:将文件中存储的基本数据类型变量和字符串读取到内存中,保存在变量中
注意:读取不同类型的数据的顺序要与当初写入文件时,保存的数据的顺序一致
@Test
public void test4() throws IOException {
DataInputStream dis = new DataInputStream(new FileInputStream("output.txt"));
String name = dis.readUTF();
int age = dis.readInt();
boolean isMale = dis.readBoolean();
System.out.println("name = " + name);
System.out.println("age = " + age);
System.out.println("isMale = " + isMale);
dis.close();
}
九、对象流
- ObjectInputStream和OjbectOutputSteam
- 用于存储和读取基本数据类型数据或对象的处理流。它的强大之处就是可以把Java中的对象写入到数据源中,也能把对象从数据源中还原回来。
- 序列化:用ObjectOutputStream类保存基本类型数据或对象的机制
- 反序列化:用ObjectInputStream类读取基本类型数据或对象的机制
- ObjectOutputStream和ObjectInputStream不能序列化static和transient修饰的成员变量
对象的序列化
- 对象序列化机制允许把内存中的Java对象转换成平台无关的二进制流,从而允许把这种二进制流持久地保存在磁盘上,或通过网络将这种二进制流传输到另一个网络节点。//当其它程序获取了这种二进制流,就可以恢复成原来的Java对象
- 序列化的好处在于可将任何实现了Serializable接口的对象转化为字节数据,使其在保存和传输时可被还原
- 序列化是 RMI(Remote Method Invoke – 远程方法调用)过程的参数和返回值都必须实现的机制,而 RMI 是 JavaEE 的基础。因此序列化机制是JavaEE 平台的基础
- 如果需要让某个对象支持序列化机制,则必须让对象所属的类及其属性是可序列化的,为了让某个类是可序列化的,该类必须实现如下两个接口之一。否则,会抛出NotSerializableException异常
- 凡是实现Serializable接口的类都有一个表示序列化版本标识符的静态变量:
private static final long serialVersionUID;
- serialVersionUID用来表明类的不同版本间的兼容性。简言之,其目的是以序列化对象进行版本控制,有关各版本反序列化时是否兼容。
- 如果类没有显示定义这个静态常量,它的值是Java运行时环境根据类的内部细节自动生成的。若类的实例变量做了修改,serialVersionUID 可能发生变化。故建议,显式声明。
- 简单来说,Java的序列化机制是通过在运行时判断类的serialVersionUID来验证版本一致性的。在进行反序列化时,JVM会把传来的字节流中的serialVersionUID与本地相应实体类的serialVersionUID进行比较,如果相同就认为是一致的,可以进行反序列化,否则就会出现序列化版本不一致的异常。(InvalidCastException)
使用对象流序列化对象
- 若某个类实现了 Serializable 接口,该类的对象就是可序列化的:
- 创建一个 ObjectOutputStream
- 调用 ObjectOutputStream 对象的 writeObject(对象) 方法输出可序列化对象
- 注意写出一次,操作flush()一次
- 反序列化
- 创建一个 ObjectInputStream
- 调用 readObject() 方法读取流中的对象
- 强调:如果某个类的属性不是基本数据类型或 String 类型,而是另一个引用类型,那么这个引用类型必须是可序列化的,否则拥有该类型的Field 的类也不能序列化
序列化代码实现
将对象写入到磁盘或者进行网络传输(要求对象必须实现序列化)
@Test
public void testObjectOutputStream(){
ObjectOutputStream oos = null;
try {
oos = new ObjectOutputStream(new FileOutputStream("object.dat"));
oos.writeObject(new String("测试数据"));
oos.flush();//刷新操作
oos.writeObject(new Person("张三",23));
oos.flush();
} catch (IOException e) {
e.printStackTrace();
} finally {
if(oos != null){
try {
oos.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
}
反序列化代码实现
将磁盘文件中的对象数据源读出
@Test
public void testObjectInputStream() {
ObjectInputStream ois = null;
try {
ois = new ObjectInputStream(new FileInputStream("object.dat"));
Object obj = ois.readObject();
String str = (String) obj;
Person p = (Person) ois.readObject();
System.out.println(str);
System.out.println(p);
} catch (IOException e) {
e.printStackTrace();
} catch (ClassNotFoundException e) {
e.printStackTrace();
} finally {
if (ois != null) {
try {
ois.close();
} catch (IOException e) {
e.printStackTrace();
}
}
}
}
谈谈你对java.io.Serializable接口的理解,我们知道它用于序列化,是空方法接口,还有其它认识吗?
- 实现了Serializable接口的对象,可将它们转换成一系列字节,并可在以后完全恢复回原来的样子。这一过程亦可通过网络进行。这意味着序列化机制能自动补偿操作系统间的差异。换句话说,可以先在Windows机器上创建一个对象,对其序列化,然后通过网络发给一台Unix机器,然后在那里准确无误地重新“装配”。不必关心数据在不同机器上如何表示,也不必关心字节的顺序或者其他任何细节。
- 由于大部分作为参数的类如String、Integer等都实现了
java.io.Serializable
的接口,也可以利用多态的性质,作为参数使接口更灵活。
十、随机存取文件流
RandomAccessFile类
-
RandomAccessFile直接继承于java.lang.Object类,实现了DataInput和DataOutput接口
-
RandomAccessFile既可以作为一个输入流,又可以作为一个输出流
-
如果RandomAccessFile作为输出流时,写出到的文件如果不存在,则在执行过程中自动创建。如果写出到的文件存在,则会对原文件内容进行覆盖。(默认情况下,从头覆盖)
-
RandomAccessFile 声明在java.io包下,但直接继承于java.lang.Object类。并且它实现了DataInput、DataOutput这两个接口,也就意味着这个类既可以读也可以写
-
RandomAccessFile 类支持 “随机访问” 的方式,程序可以直接跳到文件的任意地方来读、写文件
- 支持只访问文件的部分内容
- 可以向已存在的文件后追加内容
-
RandomAccessFile 对象包含一个记录指针,用以标示当前读写处的位置。
-
RandomAccessFile 类对象可以自由移动记录指针:
- long getFilePointer():获取文件记录指针的当前位置
- void seek(long pos):将文件记录指针定位到 pos 位置
-
构造器
- public RandomAccessFile(String name, String mode)
- public RandomAccessFile(File file, String mode)
-
创建 RandomAccessFile 类实例需要指定一个 mode 参数,该参数指定 RandomAccessFile 的访问模式:
- r: 以只读方式打开
- rw:打开以便读取和写入
- rwd:打开以便读取和写入;同步文件内容的更新
- rws:打开以便读取和写入;同步文件内容和元数据的更新
-
如果模式为只读r。则不会创建文件,而是会去读取一个已经存在的文件,如果读取的文件不存在则会出现异常。 如果模式为rw读写。如果文件不存在则会去创建文件,如果存在则不会创建
代码实现
@Test
public void test1() throws IOException {
RandomAccessFile raf1 = new RandomAccessFile(new File("hello.jpg"), "r");
RandomAccessFile raf2 = new RandomAccessFile(new File("newhello.jpg"), "rw");
byte[] buffer = new byte[1024];
int len;
while ((len = raf1.read(buffer)) != -1) {
raf2.write(buffer, 0, len);
}
raf1.close();
raf2.close();
}
使用RandomAccessFile实现数据的插入效果
/*
使用RandomAccessFile实现数据的插入效果
*/
@Test
public void test3() throws IOException {
RandomAccessFile raf = new RandomAccessFile("hello.txt","rw");
//将指针调到角标为3的位置
raf.seek(3);
//保存指针3后面的所有数据到StringBuilder中
StringBuilder builder = new StringBuilder((int) new File("hello.txt").length());
byte[] buffer = new byte[20];
int len;
while((len = raf.read(buffer)) != -1){
builder.append(new String(buffer,0,len)) ;
}
//调回指针,写入“xyz”
raf.seek(3);
raf.write("xyz".getBytes());
//将StringBuilder中的数据写入到文件中
raf.write(builder.toString().getBytes());
raf.close();
}