1、Introduction
2、Implementing a Command 执行命令
This page describes how to write a function that implements the behaviour of a command
介绍了如何编写实现命令行为的函数。
Functions that implement the behaviour of a user defined command must have the following interface (prototype原型):
BaseType_t xFunctionName( int8_t *pcWriteBuffer,
size_t xWriteBufferLen,
const int8_t *pcCommandString );
pcWriteBuffer | This is the buffer into which any generated output should be written(任何产生的输出都应该写入的缓冲区). For example, if the function is simply going to return the fixed string "Hello World", then the string is written into pcWriteBuffer. Output must always be null terminated(输出必须以null结尾). |
xWriteBufferLen | This is the size of the buffer pointed to by the pcWriteBuffer parameter. Writing more than xWriteBufferLen characters into pcWriteBuffer will cause a buffer overflow. |
pcCommandString | A pointer to the entire command string. Having access to the entire command string allows the function implementation to extract the command parameters - if there are any. FreeRTOS+CLI provides helper functions that accept the command string and return the command parameters - so explicit string parsing is not required. Examples are provided on this page. |
Returns:
Executing some commands will result in more than a single line of output being produced. For example, a file system "dir" (or "ls") command will generate a line of output for each file in a directory. If there are three files in the directory, the output might look as below:
file1.txt file2.txt file3.txt
To minimise RAM usage, and ensure RAM usage is deterministic, FreeRTOS+CLI allows functions that implement command behaviour to output a single line at a time. The function return value is used to indicate whether the output line is the end of the output, or if there are more lines to be generated.
Return pdFALSE if the generated output is the end of the output, meaning there are no more lines to be generated, and the command execution is complete.
Return pdTRUE if the returned output is not the end of the output, and there are still one or more lines to be generated before the command execution is complete.
To continue the example of the "dir" command that outputs three file names:
- The first time the function that implements the dir command is called, it is possible to only output the first line (file1.txt). If this is done the function must return pdTRUE to indicate there are more lines to follow.
- The second time the function that implements the dir command is called, it is possible to only output the second line (file2.txt). If this is done the function must return pdTRUE again to indicate there are more lines to follow.
- The third time the function that implements the dir command is called, only the third line (file3.txt) will be output. This time, there are no more lines to output, so the function must return pdFALSE.
Alternatively, if there is sufficient RAM, and the value passed in xWriteBufferLen is large enough, all three lines could have been returned at once - in which case the function must return pdFALSE on its first execution.
Each time a command is executed, FreeRTOS+CLI will repeatedly call the function that implements the command behaviour, until the function returns pdFALSE.
FreeRTOS_CLIGetParameter()
FreeRTOS_CLI.h
const uint8_t *FreeRTOS_CLIGetParameter( const int8_t *pcCommandString,
uint8_t ucWantedParameter,
uint8_t *pucParameterStringLength )
Parameters:
pcCommandString | A pointer to the entire command string, as entered by the user. |
ucWantedParameter | The position of the parameter being requested within the command string. For example, if the input command was "copy [source_file] [destination_file]", set ucWantedParameter to 1 to request the name and length of the source_file parameter. Set ucWantedParameter to 2 to request the name and length of the destination_file parameter. |
pucParameterStringLength | The string length of the parameter being requested is returned in *pucParameterStringLength. For example, if the parameter text was "filename.txt", then *pucParameterStringLength will be set to 12, as there are 12 characters in the string. |
Returns:
A pointer to the start of the parameter being requested is returned. For example, if the full command string is "copy file1.txt file2.txt", and ucWantedParameter is 2, FreeRTOS_CLIGetParameter() will return a pointer to the 'f' of "file2.txt".
Examples
The following examples are provided below:
- A command that takes no parameters and returns a single string.
- A command that takes no parameters and returns multiple strings, one line at a time.
- A command that expects a fixed number of parameters.
- A command that accepts a variable number of parameters, and returns a variable number of strings one line at a time.
Example 1: A command with no parameters
The FreeRTOS vTaskList() API function generates a table containing information on the state of each task. The table contains a line of text for each task. The command implemented in Example 1 outputs this table. Example 1 demonstrates the simple case where the entire table is output at once. The comments in the code provide more explanation.
没有参数,一次返回
/* This function implements the behaviour of a command, so must have the correct prototype. */ static BaseType_t prvTaskStatsCommand( int8_t *pcWriteBuffer, size_t xWriteBufferLen, const int8_t *pcCommandString ) { /* For simplicity, this function assumes the output buffer is large enough to hold all the text generated by executing the vTaskList() API function, so the xWriteBufferLen parameter is not used. */ ( void ) xWriteBufferLen; /* pcWriteBuffer is used directly as the vTaskList() parameter, so the table generated by executing vTaskList() is written directly into the output buffer. */ vTaskList( pcWriteBuffer + strlen( pcHeader ) ); /* The entire table was written directly to the output buffer. Execution of this command is complete, so return pdFALSE. */ return pdFALSE; } Example 1: Outputting multiple lines at once |
Example 2: Returning multiple lines one line at a time
Every command registered with FreeRTOS+CLI has its own help string. The help string is one line of text that demonstrates how the command is used. FreeRTOS+CLI includes a "help" command that returns all the help strings, providing the user with a list of available commands along with instructions on how each command is used. Example 2 shows the implementation of the help commend. Unlike example 1, where all the output was generated in one go, example 2 generates a single line at a time. Note this function is not re-entrant.
没有参数传入,一次返回一行,会被重复调用
/* This function implements the behaviour of a command, so must have the correct prototype. */ static BaseType_t prvHelpCommand( int8_t *pcWriteBuffer, size_t xWriteBufferLen, const int8_t *pcCommandString ) { /* Executing the "help" command will generate multiple lines of text, but this function will only output a single line at a time. Therefore, this function is called multiple times to complete the processing of a single "help" command. That means it has to remember which help strings it has already output, and which still remain to be output. The static pxCommand variable is used to point to the next help string that needs outputting. */ static const xCommandLineInputListItem *pxCommand = NULL; signed BaseType_t xReturn; if( pxCommand == NULL ) { /* pxCommand is NULL in between executions of the "help" command, so if it is NULL on entry to this function it is the start of a new "help" command and the first help string is returned. The following line points pxCommand to the first command registered with FreeRTOS+CLI. */ pxCommand = &xRegisteredCommands; } /* Output the help string for the command pointed to by pxCommand, taking care not to overflow the output buffer. */ strncpy( pcWriteBuffer, pxCommand->pxCommandLineDefinition->pcHelpString, xWriteBufferLen ); /* Move onto the next command in the list, ready to output the help string for that command the next time this function is called. */ pxCommand = pxCommand->pxNext; if( pxCommand == NULL ) { /* If the next command in the list is NULL, then there are no more commands to process, and pdFALSE can be returned. */ xReturn = pdFALSE; } else { /* If the next command in the list is not NULL, then there are more commands to process and therefore more lines of output to be generated. In this case pdTRUE is returned. */ xReturn = pdTRUE; } return xReturn; } Example 2: Generating multiple lines of output, one line at a time |
Example 3: A command with a fixed number of parameters
Note that, if this command is declared to take two parameters when it is registered, FreeRTOS+CLI will not even call the command unless exactly two parameters are supplied.
/* This function implements the behaviour of a command, so must have the correct prototype. */ static BaseType_t prvCopyCommand( int8_t *pcWriteBuffer, size_t xWriteBufferLen, const int8_t *pcCommandString ) { int8_t *pcParameter1, *pcParameter2; BaseType_t xParameter1StringLength, xParameter2StringLength, xResult; /* Obtain the name of the source file, and the length of its name, from the command string. The name of the source file is the first parameter. */ pcParameter1 = FreeRTOS_CLIGetParameter ( /* The command string itself. */ pcCommandString, /* Return the first parameter. */ 1, /* Store the parameter string length. */ &xParameter1StringLength ); /* Obtain the name of the destination file, and the length of its name. */ pcParameter2 = FreeRTOS_CLIGetParameter( pcCommandString, 2, &xParameter2StringLength ); /* Terminate both file names. */ pcParameter1[ xParameter1StringLength ] = 0x00; pcParameter2[ xParameter2StringLength ] = 0x00; /* Perform the copy operation itself. */ xResult = prvCopyFile( pcParameter1, pcParameter2 ); if( xResult == pdPASS ) { /* The copy was successful. There is nothing to output. */ *pcWriteBuffer = NULL; } else { /* The copy was not successful. Inform the users. */ snprintf( pcWriteBuffer, xWriteBufferLen, "Error during copy\r\n\r\n" ); } /* There is only a single line of output produced in all cases. pdFALSE is returned because there is no more output to be generated. */ return pdFALSE; } Example 3: Accessing and using the command parameters |
Example 4: A command with a variable number of parameters(变参)
Example 4 demonstrates how to create and implement a command that accepts a variable number of parameters. FreeRTOS+CLI will not check the number of supplied parameters, and the implementation of the command simply echos parameter back, one at a time. For example, if the assigned command string was "echo_parameters", if the user enters:
"echo_parameters one two three four"
Then the generated out will be:
The parameters were:
1: one
2: two
3: three
4: four
说明:这里的 prvParameterEchoCommand 调用规则是返回 pdTRUE 就会被再调用一次。变参的命令接收就是利用这种方式实现。比如传入的命令行是 cmd a b c d e f g
第一次调用接收
lParameterNumber == 0,结束后就lParameterNumber 进行+1。返回true
第二次调用lParameterNumber == 1,用参数解析函数把第一个参数 a解析出来
第三次递增
直到解析参数的函数返回NULL,此函数解析了所有的参数,让函数返回False就可以了
static BaseType_t prvParameterEchoCommand( int8_t *pcWriteBuffer, size_t xWriteBufferLen, c onst int8_t *pcCommandString ) { int8_t *pcParameter; BaseType_t lParameterStringLength, xReturn; /* Note that the use of the static parameter means this function is not reentrant. */ static BaseType_t lParameterNumber = 0; if( lParameterNumber == 0 ) { /* lParameterNumber is 0, so this is the first time the function has been called since the command was entered. Return the string "The parameters were:" before returning any parameter strings. */ sprintf( pcWriteBuffer, "The parameters were:\r\n" ); /* Next time the function is called the first parameter will be echoed back. */ lParameterNumber = 1L; /* There is more data to be returned as no parameters have been echoed back yet, so set xReturn to pdPASS so the function will be called again. */ xReturn = pdPASS; } else { /* lParameter is not 0, so holds the number of the parameter that should be returned. Obtain the complete parameter string. */ pcParameter = ( int8_t * ) FreeRTOS_CLIGetParameter ( /* The command string itself. */ pcCommandString, /* Return the next parameter. */ lParameterNumber, /* Store the parameter string length. */ &lParameterStringLength ); if( pcParameter != NULL ) { /* There was another parameter to return. Copy it into pcWriteBuffer. in the format "[number]: [Parameter String". */ memset( pcWriteBuffer, 0x00, xWriteBufferLen ); sprintf( pcWriteBuffer, "%d: ", lParameterNumber ); strncat( pcWriteBuffer, pcParameter, lParameterStringLength ); strncat( pcWriteBuffer, "\r\n", strlen( "\r\n" ) ); /* There might be more parameters to return after this one, so again set xReturn to pdTRUE. */ xReturn = pdTRUE; lParameterNumber++; } else { /* No more parameters were found. Make sure the write buffer does not contain a valid string to prevent junk being printed out. */ pcWriteBuffer[ 0 ] = 0x00; /* There is no more data to return, so this time set xReturn to pdFALSE. */ xReturn = pdFALSE; /* Start over the next time this command is executed. */ lParameterNumber = 0; } } return xReturn; } Example 3: Accessing a variable number of parameters |