nrf52840的rtc使用范例

平台：SDK15.2

开发板：pca10056

开发平台：MDK5.24

 

 

1.添加文件nrfx_rtc.c

2.添加头文件的路径

 

const nrf_drv_rtc_t rtc = NRF_DRV_RTC_INSTANCE(0); /**< Declaring an instance of nrf_drv_rtc for RTC0. */

/** @brief: Function for handling the RTC0 interrupts.
 * Triggered on TICK and COMPARE0 match.
 */
static void rtc_handler(nrf_drv_rtc_int_type_t int_type)//rtc中断函数
{
	uint32_t err_code = NRF_SUCCESS;
    if (int_type == NRF_DRV_RTC_INT_COMPARE0)
    {
		err_code = nrf_drv_rtc_cc_set(&rtc,0,COMPARE_COUNTERTIME * 8,true);//value reload
		APP_ERROR_CHECK(err_code);		
		nrf_drv_rtc_counter_clear(&rtc);//Clear the RTC counter to start count from zero
        nrf_gpio_pin_toggle(COMPARE_EVENT_OUTPUT);
    }
    else if (int_type == NRF_DRV_RTC_INT_TICK)
    {
        nrf_gpio_pin_toggle(TICK_EVENT_OUTPUT);
    }
}





/** @brief Function initialization and configuration of RTC driver instance.
 */
static void rtc_config(void)//rtc配置并且开启rtc
{
    uint32_t err_code;

    //Initialize RTC instance
    nrf_drv_rtc_config_t config = NRF_DRV_RTC_DEFAULT_CONFIG;
    config.prescaler = 4095;
    err_code = nrf_drv_rtc_init(&rtc, &config, rtc_handler);
    APP_ERROR_CHECK(err_code);

    //Enable tick event & interrupt
    nrf_drv_rtc_tick_enable(&rtc,true);

    //Set compare channel to trigger interrupt after COMPARE_COUNTERTIME seconds
    err_code = nrf_drv_rtc_cc_set(&rtc,0,COMPARE_COUNTERTIME * 8,true);
    APP_ERROR_CHECK(err_code);

    //Power on RTC instance
    nrf_drv_rtc_enable(&rtc);
}